From 035ab0212eede4c7ab894fa78b14da0fa6056ef4 Mon Sep 17 00:00:00 2001 From: "Suren A. Chilingaryan" Date: Sun, 2 Apr 2017 08:05:51 +0200 Subject: Support pod variants, i.e. one of the specified pods will be actually configured depending on the inventory/group parameters --- .../apache2-kaas-centos/conf.d.disabled/ssl.conf | 217 +++ .../conf.d.disabled/userdir.conf | 36 + .../files/etc/apache2-kaas-centos/conf.d/README | 9 + .../etc/apache2-kaas-centos/conf.d/autoindex.conf | 94 ++ .../etc/apache2-kaas-centos/conf.d/router.conf | 6 + .../files/etc/apache2-kaas-centos/conf.d/ssl.conf | 0 .../etc/apache2-kaas-centos/conf.d/welcome.conf | 18 + .../conf.modules.d/00-base.conf | 67 + .../apache2-kaas-centos/conf.modules.d/00-mpm.conf | 19 + .../conf.modules.d/00-proxy.conf | 4 + .../conf.modules.disabled/00-dav.conf | 3 + .../conf.modules.disabled/00-lua.conf | 1 + .../conf.modules.disabled/00-optional.conf | 20 + .../conf.modules.disabled/00-proxy.conf | 16 + .../conf.modules.disabled/00-ssl.conf | 1 + .../conf.modules.disabled/00-systemd.conf | 2 + .../conf.modules.disabled/01-cgi.conf | 14 + .../files/etc/apache2-kaas-centos/conf/httpd.conf | 353 +++++ .../files/etc/apache2-kaas-centos/conf/magic | 385 +++++ .../apache2-kaas-docker/extra/httpd-autoindex.conf | 93 ++ .../etc/apache2-kaas-docker/extra/httpd-dav.conf | 52 + .../apache2-kaas-docker/extra/httpd-default.conf | 75 + .../etc/apache2-kaas-docker/extra/httpd-info.conf | 37 + .../apache2-kaas-docker/extra/httpd-languages.conf | 141 ++ .../apache2-kaas-docker/extra/httpd-manual.conf | 31 + .../etc/apache2-kaas-docker/extra/httpd-mpm.conf | 110 ++ .../extra/httpd-multilang-errordoc.conf | 52 + .../etc/apache2-kaas-docker/extra/httpd-ssl.conf | 269 ++++ .../apache2-kaas-docker/extra/httpd-userdir.conf | 28 + .../apache2-kaas-docker/extra/httpd-vhosts.conf | 45 + .../files/etc/apache2-kaas-docker/httpd.conf | 496 ++++++ .../files/etc/apache2-kaas-docker/kaas/router.conf | 2 + .../katrin/files/etc/apache2-kaas-docker/magic | 382 +++++ .../files/etc/apache2-kaas-docker/mime.types | 1588 ++++++++++++++++++++ .../original/extra/httpd-autoindex.conf | 93 ++ .../original/extra/httpd-dav.conf | 52 + .../original/extra/httpd-default.conf | 75 + .../original/extra/httpd-info.conf | 37 + .../original/extra/httpd-languages.conf | 141 ++ .../original/extra/httpd-manual.conf | 31 + .../original/extra/httpd-mpm.conf | 110 ++ .../original/extra/httpd-multilang-errordoc.conf | 52 + .../original/extra/httpd-ssl.conf | 269 ++++ .../original/extra/httpd-userdir.conf | 28 + .../original/extra/httpd-vhosts.conf | 45 + .../etc/apache2-kaas-docker/original/httpd.conf | 494 ++++++ .../katrin/files/etc/apache2-kaas/conf.d/README | 9 - .../files/etc/apache2-kaas/conf.d/autoindex.conf | 94 -- .../katrin/files/etc/apache2-kaas/conf.d/ssl.conf | 217 --- .../files/etc/apache2-kaas/conf.d/userdir.conf | 36 - .../files/etc/apache2-kaas/conf.d/welcome.conf | 18 - .../etc/apache2-kaas/conf.modules.d/00-base.conf | 67 - .../etc/apache2-kaas/conf.modules.d/00-dav.conf | 3 - .../etc/apache2-kaas/conf.modules.d/00-lua.conf | 1 - .../etc/apache2-kaas/conf.modules.d/00-mpm.conf | 19 - .../apache2-kaas/conf.modules.d/00-optional.conf | 20 - .../etc/apache2-kaas/conf.modules.d/00-proxy.conf | 16 - .../etc/apache2-kaas/conf.modules.d/00-ssl.conf | 1 - .../apache2-kaas/conf.modules.d/00-systemd.conf | 2 - .../etc/apache2-kaas/conf.modules.d/01-cgi.conf | 14 - .../katrin/files/etc/apache2-kaas/conf/httpd.conf | 353 ----- .../katrin/files/etc/apache2-kaas/conf/magic | 385 ----- setup/projects/katrin/files/etc/apache2-kaas/logs | 1 - .../projects/katrin/files/etc/apache2-kaas/modules | 1 - setup/projects/katrin/files/etc/apache2-kaas/run | 1 - 65 files changed, 6093 insertions(+), 1258 deletions(-) create mode 100644 setup/projects/katrin/files/etc/apache2-kaas-centos/conf.d.disabled/ssl.conf create mode 100644 setup/projects/katrin/files/etc/apache2-kaas-centos/conf.d.disabled/userdir.conf create mode 100644 setup/projects/katrin/files/etc/apache2-kaas-centos/conf.d/README create mode 100644 setup/projects/katrin/files/etc/apache2-kaas-centos/conf.d/autoindex.conf create mode 100644 setup/projects/katrin/files/etc/apache2-kaas-centos/conf.d/router.conf create mode 100644 setup/projects/katrin/files/etc/apache2-kaas-centos/conf.d/ssl.conf create mode 100644 setup/projects/katrin/files/etc/apache2-kaas-centos/conf.d/welcome.conf create mode 100644 setup/projects/katrin/files/etc/apache2-kaas-centos/conf.modules.d/00-base.conf create mode 100644 setup/projects/katrin/files/etc/apache2-kaas-centos/conf.modules.d/00-mpm.conf create mode 100644 setup/projects/katrin/files/etc/apache2-kaas-centos/conf.modules.d/00-proxy.conf create mode 100644 setup/projects/katrin/files/etc/apache2-kaas-centos/conf.modules.disabled/00-dav.conf create mode 100644 setup/projects/katrin/files/etc/apache2-kaas-centos/conf.modules.disabled/00-lua.conf create mode 100644 setup/projects/katrin/files/etc/apache2-kaas-centos/conf.modules.disabled/00-optional.conf create mode 100644 setup/projects/katrin/files/etc/apache2-kaas-centos/conf.modules.disabled/00-proxy.conf create mode 100644 setup/projects/katrin/files/etc/apache2-kaas-centos/conf.modules.disabled/00-ssl.conf create mode 100644 setup/projects/katrin/files/etc/apache2-kaas-centos/conf.modules.disabled/00-systemd.conf create mode 100644 setup/projects/katrin/files/etc/apache2-kaas-centos/conf.modules.disabled/01-cgi.conf create mode 100644 setup/projects/katrin/files/etc/apache2-kaas-centos/conf/httpd.conf create mode 100644 setup/projects/katrin/files/etc/apache2-kaas-centos/conf/magic create mode 100644 setup/projects/katrin/files/etc/apache2-kaas-docker/extra/httpd-autoindex.conf create mode 100644 setup/projects/katrin/files/etc/apache2-kaas-docker/extra/httpd-dav.conf create mode 100644 setup/projects/katrin/files/etc/apache2-kaas-docker/extra/httpd-default.conf create mode 100644 setup/projects/katrin/files/etc/apache2-kaas-docker/extra/httpd-info.conf create mode 100644 setup/projects/katrin/files/etc/apache2-kaas-docker/extra/httpd-languages.conf create mode 100644 setup/projects/katrin/files/etc/apache2-kaas-docker/extra/httpd-manual.conf create mode 100644 setup/projects/katrin/files/etc/apache2-kaas-docker/extra/httpd-mpm.conf create mode 100644 setup/projects/katrin/files/etc/apache2-kaas-docker/extra/httpd-multilang-errordoc.conf create mode 100644 setup/projects/katrin/files/etc/apache2-kaas-docker/extra/httpd-ssl.conf create mode 100644 setup/projects/katrin/files/etc/apache2-kaas-docker/extra/httpd-userdir.conf create mode 100644 setup/projects/katrin/files/etc/apache2-kaas-docker/extra/httpd-vhosts.conf create mode 100644 setup/projects/katrin/files/etc/apache2-kaas-docker/httpd.conf create mode 100644 setup/projects/katrin/files/etc/apache2-kaas-docker/kaas/router.conf create mode 100644 setup/projects/katrin/files/etc/apache2-kaas-docker/magic create mode 100644 setup/projects/katrin/files/etc/apache2-kaas-docker/mime.types create mode 100644 setup/projects/katrin/files/etc/apache2-kaas-docker/original/extra/httpd-autoindex.conf create mode 100644 setup/projects/katrin/files/etc/apache2-kaas-docker/original/extra/httpd-dav.conf create mode 100644 setup/projects/katrin/files/etc/apache2-kaas-docker/original/extra/httpd-default.conf create mode 100644 setup/projects/katrin/files/etc/apache2-kaas-docker/original/extra/httpd-info.conf create mode 100644 setup/projects/katrin/files/etc/apache2-kaas-docker/original/extra/httpd-languages.conf create mode 100644 setup/projects/katrin/files/etc/apache2-kaas-docker/original/extra/httpd-manual.conf create mode 100644 setup/projects/katrin/files/etc/apache2-kaas-docker/original/extra/httpd-mpm.conf create mode 100644 setup/projects/katrin/files/etc/apache2-kaas-docker/original/extra/httpd-multilang-errordoc.conf create mode 100644 setup/projects/katrin/files/etc/apache2-kaas-docker/original/extra/httpd-ssl.conf create mode 100644 setup/projects/katrin/files/etc/apache2-kaas-docker/original/extra/httpd-userdir.conf create mode 100644 setup/projects/katrin/files/etc/apache2-kaas-docker/original/extra/httpd-vhosts.conf create mode 100644 setup/projects/katrin/files/etc/apache2-kaas-docker/original/httpd.conf delete mode 100644 setup/projects/katrin/files/etc/apache2-kaas/conf.d/README delete mode 100644 setup/projects/katrin/files/etc/apache2-kaas/conf.d/autoindex.conf delete mode 100644 setup/projects/katrin/files/etc/apache2-kaas/conf.d/ssl.conf delete mode 100644 setup/projects/katrin/files/etc/apache2-kaas/conf.d/userdir.conf delete mode 100644 setup/projects/katrin/files/etc/apache2-kaas/conf.d/welcome.conf delete mode 100644 setup/projects/katrin/files/etc/apache2-kaas/conf.modules.d/00-base.conf delete mode 100644 setup/projects/katrin/files/etc/apache2-kaas/conf.modules.d/00-dav.conf delete mode 100644 setup/projects/katrin/files/etc/apache2-kaas/conf.modules.d/00-lua.conf delete mode 100644 setup/projects/katrin/files/etc/apache2-kaas/conf.modules.d/00-mpm.conf delete mode 100644 setup/projects/katrin/files/etc/apache2-kaas/conf.modules.d/00-optional.conf delete mode 100644 setup/projects/katrin/files/etc/apache2-kaas/conf.modules.d/00-proxy.conf delete mode 100644 setup/projects/katrin/files/etc/apache2-kaas/conf.modules.d/00-ssl.conf delete mode 100644 setup/projects/katrin/files/etc/apache2-kaas/conf.modules.d/00-systemd.conf delete mode 100644 setup/projects/katrin/files/etc/apache2-kaas/conf.modules.d/01-cgi.conf delete mode 100644 setup/projects/katrin/files/etc/apache2-kaas/conf/httpd.conf delete mode 100644 setup/projects/katrin/files/etc/apache2-kaas/conf/magic delete mode 120000 setup/projects/katrin/files/etc/apache2-kaas/logs delete mode 120000 setup/projects/katrin/files/etc/apache2-kaas/modules delete mode 120000 setup/projects/katrin/files/etc/apache2-kaas/run (limited to 'setup/projects/katrin/files/etc') diff --git a/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.d.disabled/ssl.conf b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.d.disabled/ssl.conf new file mode 100644 index 0000000..a70324b --- /dev/null +++ b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.d.disabled/ssl.conf @@ -0,0 +1,217 @@ +# +# When we also provide SSL we have to listen to the +# the HTTPS port in addition. +# +Listen 0.0.0.0:8443 https + +## +## SSL Global Context +## +## All SSL configuration in this context applies both to +## the main server and all SSL-enabled virtual hosts. +## + +# Pass Phrase Dialog: +# Configure the pass phrase gathering process. +# The filtering dialog program (`builtin' is a internal +# terminal dialog) has to provide the pass phrase on stdout. +SSLPassPhraseDialog builtin + +# Inter-Process Session Cache: +# Configure the SSL Session Cache: First the mechanism +# to use and second the expiring timeout (in seconds). +SSLSessionCache shmcb:/opt/rh/httpd24/root/var/run/httpd/sslcache(512000) +SSLSessionCacheTimeout 300 + +# Pseudo Random Number Generator (PRNG): +# Configure one or more sources to seed the PRNG of the +# SSL library. The seed data should be of good random quality. +# WARNING! On some platforms /dev/random blocks if not enough entropy +# is available. This means you then cannot use the /dev/random device +# because it would lead to very long connection times (as long as +# it requires to make more entropy available). But usually those +# platforms additionally provide a /dev/urandom device which doesn't +# block. So, if available, use this one instead. Read the mod_ssl User +# Manual for more details. +SSLRandomSeed startup file:/dev/urandom 256 +SSLRandomSeed connect builtin +#SSLRandomSeed startup file:/dev/random 512 +#SSLRandomSeed connect file:/dev/random 512 +#SSLRandomSeed connect file:/dev/urandom 512 + +# +# Use "SSLCryptoDevice" to enable any supported hardware +# accelerators. Use "openssl engine -v" to list supported +# engine names. NOTE: If you enable an accelerator and the +# server does not start, consult the error logs and ensure +# your accelerator is functioning properly. +# +SSLCryptoDevice builtin +#SSLCryptoDevice ubsec + +## +## SSL Virtual Host Context +## + + + +# General setup for the virtual host, inherited from global configuration +#DocumentRoot "/var/www/html" +#ServerName www.example.com:8443 + +# Use separate log files for the SSL virtual host; note that LogLevel +# is not inherited from httpd.conf. +ErrorLog |/usr/bin/cat +TransferLog |/usr/bin/cat +LogLevel warn + +# SSL Engine Switch: +# Enable/Disable SSL for this virtual host. +SSLEngine on + +# SSL Protocol support: +# List the enable protocol levels with which clients will be able to +# connect. Disable SSLv2 access by default: +SSLProtocol all -SSLv2 + +# SSL Cipher Suite: +# List the ciphers that the client is permitted to negotiate. +# See the mod_ssl documentation for a complete list. +SSLCipherSuite HIGH:MEDIUM:!aNULL:!MD5 + +# Speed-optimized SSL Cipher configuration: +# If speed is your main concern (on busy HTTPS servers e.g.), +# you might want to force clients to specific, performance +# optimized ciphers. In this case, prepend those ciphers +# to the SSLCipherSuite list, and enable SSLHonorCipherOrder. +# Caveat: by giving precedence to RC4-SHA and AES128-SHA +# (as in the example below), most connections will no longer +# have perfect forward secrecy - if the server's key is +# compromised, captures of past or future traffic must be +# considered compromised, too. +#SSLCipherSuite RC4-SHA:AES128-SHA:HIGH:MEDIUM:!aNULL:!MD5 +#SSLHonorCipherOrder on + +# Server Certificate: +# Point SSLCertificateFile at a PEM encoded certificate. If +# the certificate is encrypted, then you will be prompted for a +# pass phrase. Note that a kill -HUP will prompt again. A new +# certificate can be generated using the genkey(1) command. +SSLCertificateFile /etc/pki/tls/certs/localhost.crt + +# Server Private Key: +# If the key is not combined with the certificate, use this +# directive to point at the key file. Keep in mind that if +# you've both a RSA and a DSA private key you can configure +# both in parallel (to also allow the use of DSA ciphers, etc.) +SSLCertificateKeyFile /etc/pki/tls/private/localhost.key + +# Server Certificate Chain: +# Point SSLCertificateChainFile at a file containing the +# concatenation of PEM encoded CA certificates which form the +# certificate chain for the server certificate. Alternatively +# the referenced file can be the same as SSLCertificateFile +# when the CA certificates are directly appended to the server +# certificate for convinience. +#SSLCertificateChainFile /etc/pki/tls/certs/server-chain.crt + +# Certificate Authority (CA): +# Set the CA certificate verification path where to find CA +# certificates for client authentication or alternatively one +# huge file containing all of them (file must be PEM encoded) +#SSLCACertificateFile /etc/pki/tls/certs/ca-bundle.crt + +# Client Authentication (Type): +# Client certificate verification type and depth. Types are +# none, optional, require and optional_no_ca. Depth is a +# number which specifies how deeply to verify the certificate +# issuer chain before deciding the certificate is not valid. +#SSLVerifyClient require +#SSLVerifyDepth 10 + +# Access Control: +# With SSLRequire you can do per-directory access control based +# on arbitrary complex boolean expressions containing server +# variable checks and other lookup directives. The syntax is a +# mixture between C and Perl. See the mod_ssl documentation +# for more details. +# +#SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \ +# and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \ +# and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \ +# and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \ +# and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \ +# or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/ +# + +# SSL Engine Options: +# Set various options for the SSL engine. +# o FakeBasicAuth: +# Translate the client X.509 into a Basic Authorisation. This means that +# the standard Auth/DBMAuth methods can be used for access control. The +# user name is the `one line' version of the client's X.509 certificate. +# Note that no password is obtained from the user. Every entry in the user +# file needs this password: `xxj31ZMTZzkVA'. +# o ExportCertData: +# This exports two additional environment variables: SSL_CLIENT_CERT and +# SSL_SERVER_CERT. These contain the PEM-encoded certificates of the +# server (always existing) and the client (only existing when client +# authentication is used). This can be used to import the certificates +# into CGI scripts. +# o StdEnvVars: +# This exports the standard SSL/TLS related `SSL_*' environment variables. +# Per default this exportation is switched off for performance reasons, +# because the extraction step is an expensive operation and is usually +# useless for serving static content. So one usually enables the +# exportation for CGI and SSI requests only. +# o StrictRequire: +# This denies access when "SSLRequireSSL" or "SSLRequire" applied even +# under a "Satisfy any" situation, i.e. when it applies access is denied +# and no other module can change it. +# o OptRenegotiate: +# This enables optimized SSL connection renegotiation handling when SSL +# directives are used in per-directory context. +#SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire + + SSLOptions +StdEnvVars + + + SSLOptions +StdEnvVars + + +# SSL Protocol Adjustments: +# The safe and default but still SSL/TLS standard compliant shutdown +# approach is that mod_ssl sends the close notify alert but doesn't wait for +# the close notify alert from client. When you need a different shutdown +# approach you can use one of the following variables: +# o ssl-unclean-shutdown: +# This forces an unclean shutdown when the connection is closed, i.e. no +# SSL close notify alert is send or allowed to received. This violates +# the SSL/TLS standard but is needed for some brain-dead browsers. Use +# this when you receive I/O errors because of the standard approach where +# mod_ssl sends the close notify alert. +# o ssl-accurate-shutdown: +# This forces an accurate shutdown when the connection is closed, i.e. a +# SSL close notify alert is send and mod_ssl waits for the close notify +# alert of the client. This is 100% SSL/TLS standard compliant, but in +# practice often causes hanging connections with brain-dead browsers. Use +# this only for browsers where you know that their SSL implementation +# works correctly. +# Notice: Most problems of broken clients are also related to the HTTP +# keep-alive facility, so you usually additionally want to disable +# keep-alive for those clients, too. Use variable "nokeepalive" for this. +# Similarly, one has to force some clients to use HTTP/1.0 to workaround +# their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and +# "force-response-1.0" for this. +BrowserMatch "MSIE [2-5]" \ + nokeepalive ssl-unclean-shutdown \ + downgrade-1.0 force-response-1.0 + +# Per-Server Logging: +# The home of a custom SSL log file. Use this when you want a +# compact non-error SSL logfile on a virtual host basis. +CustomLog |/usr/bin/cat \ + "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b" + + + diff --git a/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.d.disabled/userdir.conf b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.d.disabled/userdir.conf new file mode 100644 index 0000000..b5d7a49 --- /dev/null +++ b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.d.disabled/userdir.conf @@ -0,0 +1,36 @@ +# +# UserDir: The name of the directory that is appended onto a user's home +# directory if a ~user request is received. +# +# The path to the end user account 'public_html' directory must be +# accessible to the webserver userid. This usually means that ~userid +# must have permissions of 711, ~userid/public_html must have permissions +# of 755, and documents contained therein must be world-readable. +# Otherwise, the client will only receive a "403 Forbidden" message. +# + + # + # UserDir is disabled by default since it can confirm the presence + # of a username on the system (depending on home directory + # permissions). + # + UserDir disabled + + # + # To enable requests to /~user/ to serve the user's public_html + # directory, remove the "UserDir disabled" line above, and uncomment + # the following line instead: + # + #UserDir public_html + + +# +# Control access to UserDir directories. The following is an example +# for a site where these directories are restricted to read-only. +# + + AllowOverride FileInfo AuthConfig Limit Indexes + Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec + Require method GET POST OPTIONS + + diff --git a/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.d/README b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.d/README new file mode 100644 index 0000000..f5e9661 --- /dev/null +++ b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.d/README @@ -0,0 +1,9 @@ + +This directory holds configuration files for the Apache HTTP Server; +any files in this directory which have the ".conf" extension will be +processed as httpd configuration files. The directory is used in +addition to the directory /etc/httpd/conf.modules.d/, which contains +configuration files necessary to load modules. + +Files are processed in alphabetical order. + diff --git a/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.d/autoindex.conf b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.d/autoindex.conf new file mode 100644 index 0000000..55f658e --- /dev/null +++ b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.d/autoindex.conf @@ -0,0 +1,94 @@ +# +# Directives controlling the display of server-generated directory listings. +# +# Required modules: mod_authz_core, mod_authz_host, +# mod_autoindex, mod_alias +# +# To see the listing of a directory, the Options directive for the +# directory must include "Indexes", and the directory must not contain +# a file matching those listed in the DirectoryIndex directive. +# + +# +# IndexOptions: Controls the appearance of server-generated directory +# listings. +# +IndexOptions FancyIndexing HTMLTable VersionSort + +# We include the /icons/ alias for FancyIndexed directory listings. If +# you do not use FancyIndexing, you may comment this out. +# +Alias /icons/ "/opt/rh/httpd24/root/usr/share/httpd/icons/" + + + Options Indexes MultiViews FollowSymlinks + AllowOverride None + Require all granted + + +# +# AddIcon* directives tell the server which icon to show for different +# files or filename extensions. These are only displayed for +# FancyIndexed directories. +# +AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip + +AddIconByType (TXT,/icons/text.gif) text/* +AddIconByType (IMG,/icons/image2.gif) image/* +AddIconByType (SND,/icons/sound2.gif) audio/* +AddIconByType (VID,/icons/movie.gif) video/* + +AddIcon /icons/binary.gif .bin .exe +AddIcon /icons/binhex.gif .hqx +AddIcon /icons/tar.gif .tar +AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv +AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip +AddIcon /icons/a.gif .ps .ai .eps +AddIcon /icons/layout.gif .html .shtml .htm .pdf +AddIcon /icons/text.gif .txt +AddIcon /icons/c.gif .c +AddIcon /icons/p.gif .pl .py +AddIcon /icons/f.gif .for +AddIcon /icons/dvi.gif .dvi +AddIcon /icons/uuencoded.gif .uu +AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl +AddIcon /icons/tex.gif .tex +AddIcon /icons/bomb.gif /core +AddIcon /icons/bomb.gif */core.* + +AddIcon /icons/back.gif .. +AddIcon /icons/hand.right.gif README +AddIcon /icons/folder.gif ^^DIRECTORY^^ +AddIcon /icons/blank.gif ^^BLANKICON^^ + +# +# DefaultIcon is which icon to show for files which do not have an icon +# explicitly set. +# +DefaultIcon /icons/unknown.gif + +# +# AddDescription allows you to place a short description after a file in +# server-generated indexes. These are only displayed for FancyIndexed +# directories. +# Format: AddDescription "description" filename +# +#AddDescription "GZIP compressed document" .gz +#AddDescription "tar archive" .tar +#AddDescription "GZIP compressed tar archive" .tgz + +# +# ReadmeName is the name of the README file the server will look for by +# default, and append to directory listings. +# +# HeaderName is the name of a file which should be prepended to +# directory indexes. +ReadmeName README.html +HeaderName HEADER.html + +# +# IndexIgnore is a set of filenames which directory indexing should ignore +# and not include in the listing. Shell-style wildcarding is permitted. +# +IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t + diff --git a/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.d/router.conf b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.d/router.conf new file mode 100644 index 0000000..325d196 --- /dev/null +++ b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.d/router.conf @@ -0,0 +1,6 @@ +ProxyPass /adei http://katrin.kit.edu/adei +ProxyPassReverse /adei http://katrin.kit.edu/adei +ProxyPass /adei-katrin http://katrin.kit.edu/adei-katrin +ProxyPassReverse /adei-katrin http://katrin.kit.edu/adei-katrin +ProxyPass /katrin-ng http://katrin.kit.edu/katrin-ng +ProxyPassReverse /katrin-ng http://katrin.kit.edu/katrin-ng diff --git a/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.d/ssl.conf b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.d/ssl.conf new file mode 100644 index 0000000..e69de29 diff --git a/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.d/welcome.conf b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.d/welcome.conf new file mode 100644 index 0000000..34b4b72 --- /dev/null +++ b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.d/welcome.conf @@ -0,0 +1,18 @@ +# +# This configuration file enables the default "Welcome" page if there +# is no default index page present for the root URL. To disable the +# Welcome page, comment out all the lines below. +# +# NOTE: if this file is removed, it will be restored on upgrades. +# + + Options -Indexes + ErrorDocument 403 /.noindex.html + + + + AllowOverride None + Require all granted + + +Alias /.noindex.html /opt/rh/httpd24/root/usr/share/httpd/noindex/index.html diff --git a/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.modules.d/00-base.conf b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.modules.d/00-base.conf new file mode 100644 index 0000000..2e3ce8c --- /dev/null +++ b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.modules.d/00-base.conf @@ -0,0 +1,67 @@ +# +# This file loads most of the modules included with the Apache HTTP +# Server itself. +# + +LoadModule access_compat_module modules/mod_access_compat.so +LoadModule actions_module modules/mod_actions.so +LoadModule alias_module modules/mod_alias.so +LoadModule allowmethods_module modules/mod_allowmethods.so +LoadModule auth_basic_module modules/mod_auth_basic.so +LoadModule auth_digest_module modules/mod_auth_digest.so +LoadModule authn_anon_module modules/mod_authn_anon.so +LoadModule authn_core_module modules/mod_authn_core.so +LoadModule authn_dbd_module modules/mod_authn_dbd.so +LoadModule authn_dbm_module modules/mod_authn_dbm.so +LoadModule authn_file_module modules/mod_authn_file.so +LoadModule authn_socache_module modules/mod_authn_socache.so +LoadModule authz_core_module modules/mod_authz_core.so +LoadModule authz_dbd_module modules/mod_authz_dbd.so +LoadModule authz_dbm_module modules/mod_authz_dbm.so +LoadModule authz_groupfile_module modules/mod_authz_groupfile.so +LoadModule authz_host_module modules/mod_authz_host.so +LoadModule authz_owner_module modules/mod_authz_owner.so +LoadModule authz_user_module modules/mod_authz_user.so +LoadModule autoindex_module modules/mod_autoindex.so +LoadModule cache_module modules/mod_cache.so +LoadModule cache_disk_module modules/mod_cache_disk.so +LoadModule cache_socache_module modules/mod_cache_socache.so +LoadModule data_module modules/mod_data.so +LoadModule dbd_module modules/mod_dbd.so +LoadModule deflate_module modules/mod_deflate.so +LoadModule dir_module modules/mod_dir.so +LoadModule dumpio_module modules/mod_dumpio.so +LoadModule echo_module modules/mod_echo.so +LoadModule env_module modules/mod_env.so +LoadModule expires_module modules/mod_expires.so +LoadModule ext_filter_module modules/mod_ext_filter.so +LoadModule filter_module modules/mod_filter.so +LoadModule headers_module modules/mod_headers.so +#LoadModule http2_module modules/mod_http2.so +LoadModule include_module modules/mod_include.so +LoadModule info_module modules/mod_info.so +LoadModule log_config_module modules/mod_log_config.so +LoadModule logio_module modules/mod_logio.so +LoadModule macro_module modules/mod_macro.so +LoadModule mime_magic_module modules/mod_mime_magic.so +LoadModule mime_module modules/mod_mime.so +LoadModule negotiation_module modules/mod_negotiation.so +LoadModule remoteip_module modules/mod_remoteip.so +LoadModule reqtimeout_module modules/mod_reqtimeout.so +LoadModule request_module modules/mod_request.so +LoadModule rewrite_module modules/mod_rewrite.so +LoadModule setenvif_module modules/mod_setenvif.so +LoadModule slotmem_plain_module modules/mod_slotmem_plain.so +LoadModule slotmem_shm_module modules/mod_slotmem_shm.so +LoadModule socache_dbm_module modules/mod_socache_dbm.so +LoadModule socache_memcache_module modules/mod_socache_memcache.so +LoadModule socache_shmcb_module modules/mod_socache_shmcb.so +LoadModule status_module modules/mod_status.so +LoadModule substitute_module modules/mod_substitute.so +LoadModule suexec_module modules/mod_suexec.so +LoadModule unique_id_module modules/mod_unique_id.so +LoadModule unixd_module modules/mod_unixd.so +LoadModule userdir_module modules/mod_userdir.so +LoadModule version_module modules/mod_version.so +LoadModule vhost_alias_module modules/mod_vhost_alias.so + diff --git a/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.modules.d/00-mpm.conf b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.modules.d/00-mpm.conf new file mode 100644 index 0000000..7bfd1d4 --- /dev/null +++ b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.modules.d/00-mpm.conf @@ -0,0 +1,19 @@ +# Select the MPM module which should be used by uncommenting exactly +# one of the following LoadModule lines: + +# prefork MPM: Implements a non-threaded, pre-forking web server +# See: http://httpd.apache.org/docs/2.4/mod/prefork.html +LoadModule mpm_prefork_module modules/mod_mpm_prefork.so + +# worker MPM: Multi-Processing Module implementing a hybrid +# multi-threaded multi-process web server +# See: http://httpd.apache.org/docs/2.4/mod/worker.html +# +#LoadModule mpm_worker_module modules/mod_mpm_worker.so + +# event MPM: A variant of the worker MPM with the goal of consuming +# threads only for connections with active processing +# See: http://httpd.apache.org/docs/2.4/mod/event.html +# +#LoadModule mpm_event_module modules/mod_mpm_event.so + diff --git a/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.modules.d/00-proxy.conf b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.modules.d/00-proxy.conf new file mode 100644 index 0000000..b8003f4 --- /dev/null +++ b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.modules.d/00-proxy.conf @@ -0,0 +1,4 @@ +# This file configures all the proxy modules: +LoadModule proxy_module modules/mod_proxy.so +LoadModule proxy_http_module modules/mod_proxy_http.so + diff --git a/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.modules.disabled/00-dav.conf b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.modules.disabled/00-dav.conf new file mode 100644 index 0000000..e6af8de --- /dev/null +++ b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.modules.disabled/00-dav.conf @@ -0,0 +1,3 @@ +LoadModule dav_module modules/mod_dav.so +LoadModule dav_fs_module modules/mod_dav_fs.so +LoadModule dav_lock_module modules/mod_dav_lock.so diff --git a/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.modules.disabled/00-lua.conf b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.modules.disabled/00-lua.conf new file mode 100644 index 0000000..9e0d0db --- /dev/null +++ b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.modules.disabled/00-lua.conf @@ -0,0 +1 @@ +LoadModule lua_module modules/mod_lua.so diff --git a/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.modules.disabled/00-optional.conf b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.modules.disabled/00-optional.conf new file mode 100644 index 0000000..70bda5e --- /dev/null +++ b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.modules.disabled/00-optional.conf @@ -0,0 +1,20 @@ +# +# This file lists modules included with the Apache HTTP Server +# which are not enabled by default. +# + +#LoadModule asis_module modules/mod_asis.so +#LoadModule buffer_module modules/mod_buffer.so +#LoadModule file_cache_module modules/mod_file_cache.so +#LoadModule watchdog_module modules/mod_watchdog.so +#LoadModule heartbeat_module modules/mod_heartbeat.so +#LoadModule heartmonitor_module modules/mod_heartmonitor.so +#LoadModule usertrack_module modules/mod_usertrack.so +#LoadModule dialup_module modules/mod_dialup.so +#LoadModule charset_lite_module modules/mod_charset_lite.so +#LoadModule log_debug_module modules/mod_log_debug.so +#LoadModule log_forensic_module modules/mod_log_forensic.so +#LoadModule ratelimit_module modules/mod_ratelimit.so +#LoadModule reflector_module modules/mod_reflector.so +#LoadModule sed_module modules/mod_sed.so +#LoadModule speling_module modules/mod_speling.so diff --git a/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.modules.disabled/00-proxy.conf b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.modules.disabled/00-proxy.conf new file mode 100644 index 0000000..cc0bca0 --- /dev/null +++ b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.modules.disabled/00-proxy.conf @@ -0,0 +1,16 @@ +# This file configures all the proxy modules: +LoadModule proxy_module modules/mod_proxy.so +LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so +LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so +LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so +LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so +LoadModule proxy_ajp_module modules/mod_proxy_ajp.so +LoadModule proxy_balancer_module modules/mod_proxy_balancer.so +LoadModule proxy_connect_module modules/mod_proxy_connect.so +LoadModule proxy_express_module modules/mod_proxy_express.so +LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so +LoadModule proxy_fdpass_module modules/mod_proxy_fdpass.so +LoadModule proxy_ftp_module modules/mod_proxy_ftp.so +LoadModule proxy_http_module modules/mod_proxy_http.so +LoadModule proxy_scgi_module modules/mod_proxy_scgi.so +LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so diff --git a/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.modules.disabled/00-ssl.conf b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.modules.disabled/00-ssl.conf new file mode 100644 index 0000000..53235cd --- /dev/null +++ b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.modules.disabled/00-ssl.conf @@ -0,0 +1 @@ +LoadModule ssl_module modules/mod_ssl.so diff --git a/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.modules.disabled/00-systemd.conf b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.modules.disabled/00-systemd.conf new file mode 100644 index 0000000..b208c97 --- /dev/null +++ b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.modules.disabled/00-systemd.conf @@ -0,0 +1,2 @@ +# This file configures systemd module: +LoadModule systemd_module modules/mod_systemd.so diff --git a/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.modules.disabled/01-cgi.conf b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.modules.disabled/01-cgi.conf new file mode 100644 index 0000000..5b8b936 --- /dev/null +++ b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf.modules.disabled/01-cgi.conf @@ -0,0 +1,14 @@ +# This configuration file loads a CGI module appropriate to the MPM +# which has been configured in 00-mpm.conf. mod_cgid should be used +# with a threaded MPM; mod_cgi with the prefork MPM. + + + LoadModule cgid_module modules/mod_cgid.so + + + LoadModule cgid_module modules/mod_cgid.so + + + LoadModule cgi_module modules/mod_cgi.so + + diff --git a/setup/projects/katrin/files/etc/apache2-kaas-centos/conf/httpd.conf b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf/httpd.conf new file mode 100644 index 0000000..88fcb97 --- /dev/null +++ b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf/httpd.conf @@ -0,0 +1,353 @@ +# +# This is the main Apache HTTP server configuration file. It contains the +# configuration directives that give the server its instructions. +# See for detailed information. +# In particular, see +# +# for a discussion of each configuration directive. +# +# Do NOT simply read the instructions in here without understanding +# what they do. They're here only as hints or reminders. If you are unsure +# consult the online docs. You have been warned. +# +# Configuration and logfile names: If the filenames you specify for many +# of the server's control files begin with "/" (or "drive:/" for Win32), the +# server will use that explicit path. If the filenames do *not* begin +# with "/", the value of ServerRoot is prepended -- so 'log/access_log' +# with ServerRoot set to '/www' will be interpreted by the +# server as '/www/log/access_log', where as '/log/access_log' will be +# interpreted as '/log/access_log'. + +# +# ServerRoot: The top of the directory tree under which the server's +# configuration, error, and log files are kept. +# +# Do not add a slash at the end of the directory path. If you point +# ServerRoot at a non-local disk, be sure to specify a local disk on the +# Mutex directive, if file-based mutexes are used. If you wish to share the +# same ServerRoot for multiple httpd daemons, you will need to change at +# least PidFile. +# +ServerRoot "/opt/rh/httpd24/root/etc/httpd" + +# +# Listen: Allows you to bind Apache to specific IP addresses and/or +# ports, instead of the default. See also the +# directive. +# +# Change this to Listen on specific IP addresses as shown below to +# prevent Apache from glomming onto all bound IP addresses. +# +#Listen 12.34.56.78:80 +Listen 0.0.0.0:8080 + +# +# Dynamic Shared Object (DSO) Support +# +# To be able to use the functionality of a module which was built as a DSO you +# have to place corresponding `LoadModule' lines at this location so the +# directives contained in it are actually available _before_ they are used. +# Statically compiled modules (those listed by `httpd -l') do not need +# to be loaded here. +# +# Example: +# LoadModule foo_module modules/mod_foo.so +# +Include conf.modules.d/*.conf + +# +# If you wish httpd to run as a different user or group, you must run +# httpd as root initially and it will switch. +# +# User/Group: The name (or #number) of the user/group to run httpd as. +# It is usually good practice to create a dedicated user and group for +# running httpd, as with most system services. +# +User default +Group root + +# 'Main' server configuration +# +# The directives in this section set up the values used by the 'main' +# server, which responds to any requests that aren't handled by a +# definition. These values also provide defaults for +# any containers you may define later in the file. +# +# All of these directives may appear inside containers, +# in which case these default settings will be overridden for the +# virtual host being defined. +# + +# +# ServerAdmin: Your address, where problems with the server should be +# e-mailed. This address appears on some server-generated pages, such +# as error documents. e.g. admin@your-domain.com +# +ServerAdmin root@localhost + +# +# ServerName gives the name and port that the server uses to identify itself. +# This can often be determined automatically, but we recommend you specify +# it explicitly to prevent problems during startup. +# +# If your host doesn't have a registered DNS name, enter its IP address here. +# +#ServerName www.example.com:80 + +# +# Deny access to the entirety of your server's filesystem. You must +# explicitly permit access to web content directories in other +# blocks below. +# + + AllowOverride none + Require all denied + + +# +# Note that from this point forward you must specifically allow +# particular features to be enabled - so if something's not working as +# you might expect, make sure that you have specifically enabled it +# below. +# + +# +# DocumentRoot: The directory out of which you will serve your +# documents. By default, all requests are taken from this directory, but +# symbolic links and aliases may be used to point to other locations. +# +DocumentRoot "/opt/rh/httpd24/root/var/www/html" + +# +# Relax access to content within /opt/rh/httpd24/root/var/www. +# + + AllowOverride None + # Allow open access: + Require all granted + + +# Further relax access to the default document root: + + # + # Possible values for the Options directive are "None", "All", + # or any combination of: + # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews + # + # Note that "MultiViews" must be named *explicitly* --- "Options All" + # doesn't give it to you. + # + # The Options directive is both complicated and important. Please see + # http://httpd.apache.org/docs/2.4/mod/core.html#options + # for more information. + # + Options Indexes FollowSymLinks + + # + # AllowOverride controls what directives may be placed in .htaccess files. + # It can be "All", "None", or any combination of the keywords: + # Options FileInfo AuthConfig Limit + # + AllowOverride All + + # + # Controls who can get stuff from this server. + # + Require all granted + + +# +# DirectoryIndex: sets the file that Apache will serve if a directory +# is requested. +# + + DirectoryIndex index.html + + +# +# The following lines prevent .htaccess and .htpasswd files from being +# viewed by Web clients. +# + + Require all denied + + +# +# ErrorLog: The location of the error log file. +# If you do not specify an ErrorLog directive within a +# container, error messages relating to that virtual host will be +# logged here. If you *do* define an error logfile for a +# container, that host's errors will be logged there and not here. +# +ErrorLog |/usr/bin/cat + +# +# LogLevel: Control the number of messages logged to the error_log. +# Possible values include: debug, info, notice, warn, error, crit, +# alert, emerg. +# +LogLevel warn + + + # + # The following directives define some format nicknames for use with + # a CustomLog directive (see below). + # + LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined + LogFormat "%h %l %u %t \"%r\" %>s %b" common + + + # You need to enable mod_logio.c to use %I and %O + LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio + + + # + # The location and format of the access logfile (Common Logfile Format). + # If you do not define any access logfiles within a + # container, they will be logged here. Contrariwise, if you *do* + # define per- access logfiles, transactions will be + # logged therein and *not* in this file. + # + #CustomLog "logs/access_log" common + + # + # If you prefer a logfile with access, agent, and referer information + # (Combined Logfile Format) you can use the following directive. + # + CustomLog |/usr/bin/cat combined + + + + # + # Redirect: Allows you to tell clients about documents that used to + # exist in your server's namespace, but do not anymore. The client + # will make a new request for the document at its new location. + # Example: + # Redirect permanent /foo http://www.example.com/bar + + # + # Alias: Maps web paths into filesystem paths and is used to + # access content that does not live under the DocumentRoot. + # Example: + # Alias /webpath /full/filesystem/path + # + # If you include a trailing / on /webpath then the server will + # require it to be present in the URL. You will also likely + # need to provide a section to allow access to + # the filesystem path. + + # + # ScriptAlias: This controls which directories contain server scripts. + # ScriptAliases are essentially the same as Aliases, except that + # documents in the target directory are treated as applications and + # run by the server when requested rather than as documents sent to the + # client. The same rules about trailing "/" apply to ScriptAlias + # directives as to Alias. + # + ScriptAlias /cgi-bin/ "/opt/rh/httpd24/root/var/www/cgi-bin/" + + + +# +# "/opt/rh/httpd24/root/var/www/cgi-bin" should be changed to whatever your ScriptAliased +# CGI directory exists, if you have that configured. +# + + AllowOverride None + Options None + Require all granted + + + + # + # TypesConfig points to the file containing the list of mappings from + # filename extension to MIME-type. + # + TypesConfig /etc/mime.types + + # + # AddType allows you to add to or override the MIME configuration + # file specified in TypesConfig for specific file types. + # + #AddType application/x-gzip .tgz + # + # AddEncoding allows you to have certain browsers uncompress + # information on the fly. Note: Not all browsers support this. + # + #AddEncoding x-compress .Z + #AddEncoding x-gzip .gz .tgz + # + # If the AddEncoding directives above are commented-out, then you + # probably should define those extensions to indicate media types: + # + AddType application/x-compress .Z + AddType application/x-gzip .gz .tgz + + # + # AddHandler allows you to map certain file extensions to "handlers": + # actions unrelated to filetype. These can be either built into the server + # or added with the Action directive (see below) + # + # To use CGI scripts outside of ScriptAliased directories: + # (You will also need to add "ExecCGI" to the "Options" directive.) + # + #AddHandler cgi-script .cgi + + # For type maps (negotiated resources): + #AddHandler type-map var + + # + # Filters allow you to process content before it is sent to the client. + # + # To parse .shtml files for server-side includes (SSI): + # (You will also need to add "Includes" to the "Options" directive.) + # + AddType text/html .shtml + AddOutputFilter INCLUDES .shtml + + +# +# Specify a default charset for all content served; this enables +# interpretation of all content as UTF-8 by default. To use the +# default browser choice (ISO-8859-1), or to allow the META tags +# in HTML content to override this choice, comment out this +# directive: +# +AddDefaultCharset UTF-8 + + + # + # The mod_mime_magic module allows the server to use various hints from the + # contents of the file itself to determine its type. The MIMEMagicFile + # directive tells the module where the hint definitions are located. + # + MIMEMagicFile conf/magic + + +# +# Customizable error responses come in three flavors: +# 1) plain text 2) local redirects 3) external redirects +# +# Some examples: +#ErrorDocument 500 "The server made a boo boo." +#ErrorDocument 404 /missing.html +#ErrorDocument 404 "/cgi-bin/missing_handler.pl" +#ErrorDocument 402 http://www.example.com/subscription_info.html +# + +# +# EnableMMAP and EnableSendfile: On systems that support it, +# memory-mapping or the sendfile syscall may be used to deliver +# files. This usually improves server performance, but must +# be turned off when serving from networked-mounted +# filesystems or if support for these functions is otherwise +# broken on your system. +# Defaults if commented: EnableMMAP On, EnableSendfile Off +# +#EnableMMAP off +EnableSendfile on + +# Supplemental configuration +# +# Load config files in the "/etc/httpd/conf.d" directory, if any. +IncludeOptional conf.d/*.conf diff --git a/setup/projects/katrin/files/etc/apache2-kaas-centos/conf/magic b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf/magic new file mode 100644 index 0000000..7c56119 --- /dev/null +++ b/setup/projects/katrin/files/etc/apache2-kaas-centos/conf/magic @@ -0,0 +1,385 @@ +# Magic data for mod_mime_magic Apache module (originally for file(1) command) +# The module is described in /manual/mod/mod_mime_magic.html +# +# The format is 4-5 columns: +# Column #1: byte number to begin checking from, ">" indicates continuation +# Column #2: type of data to match +# Column #3: contents of data to match +# Column #4: MIME type of result +# Column #5: MIME encoding of result (optional) + +#------------------------------------------------------------------------------ +# Localstuff: file(1) magic for locally observed files +# Add any locally observed files here. + +#------------------------------------------------------------------------------ +# end local stuff +#------------------------------------------------------------------------------ + +#------------------------------------------------------------------------------ +# Java + +0 short 0xcafe +>2 short 0xbabe application/java + +#------------------------------------------------------------------------------ +# audio: file(1) magic for sound formats +# +# from Jan Nicolai Langfeldt , +# + +# Sun/NeXT audio data +0 string .snd +>12 belong 1 audio/basic +>12 belong 2 audio/basic +>12 belong 3 audio/basic +>12 belong 4 audio/basic +>12 belong 5 audio/basic +>12 belong 6 audio/basic +>12 belong 7 audio/basic + +>12 belong 23 audio/x-adpcm + +# DEC systems (e.g. DECstation 5000) use a variant of the Sun/NeXT format +# that uses little-endian encoding and has a different magic number +# (0x0064732E in little-endian encoding). +0 lelong 0x0064732E +>12 lelong 1 audio/x-dec-basic +>12 lelong 2 audio/x-dec-basic +>12 lelong 3 audio/x-dec-basic +>12 lelong 4 audio/x-dec-basic +>12 lelong 5 audio/x-dec-basic +>12 lelong 6 audio/x-dec-basic +>12 lelong 7 audio/x-dec-basic +# compressed (G.721 ADPCM) +>12 lelong 23 audio/x-dec-adpcm + +# Bytes 0-3 of AIFF, AIFF-C, & 8SVX audio files are "FORM" +# AIFF audio data +8 string AIFF audio/x-aiff +# AIFF-C audio data +8 string AIFC audio/x-aiff +# IFF/8SVX audio data +8 string 8SVX audio/x-aiff + +# Creative Labs AUDIO stuff +# Standard MIDI data +0 string MThd audio/unknown +#>9 byte >0 (format %d) +#>11 byte >1 using %d channels +# Creative Music (CMF) data +0 string CTMF audio/unknown +# SoundBlaster instrument data +0 string SBI audio/unknown +# Creative Labs voice data +0 string Creative\ Voice\ File audio/unknown +## is this next line right? it came this way... +#>19 byte 0x1A +#>23 byte >0 - version %d +#>22 byte >0 \b.%d + +# [GRR 950115: is this also Creative Labs? Guessing that first line +# should be string instead of unknown-endian long...] +#0 long 0x4e54524b MultiTrack sound data +#0 string NTRK MultiTrack sound data +#>4 long x - version %ld + +# Microsoft WAVE format (*.wav) +# [GRR 950115: probably all of the shorts and longs should be leshort/lelong] +# Microsoft RIFF +0 string RIFF audio/unknown +# - WAVE format +>8 string WAVE audio/x-wav +# MPEG audio. +0 beshort&0xfff0 0xfff0 audio/mpeg +# C64 SID Music files, from Linus Walleij +0 string PSID audio/prs.sid + +#------------------------------------------------------------------------------ +# c-lang: file(1) magic for C programs or various scripts +# + +# XPM icons (Greg Roelofs, newt@uchicago.edu) +# ideally should go into "images", but entries below would tag XPM as C source +0 string /*\ XPM image/x-xbm 7bit + +# this first will upset you if you're a PL/1 shop... (are there any left?) +# in which case rm it; ascmagic will catch real C programs +# C or REXX program text +0 string /* text/plain +# C++ program text +0 string // text/plain + +#------------------------------------------------------------------------------ +# compress: file(1) magic for pure-compression formats (no archives) +# +# compress, gzip, pack, compact, huf, squeeze, crunch, freeze, yabba, whap, etc. +# +# Formats for various forms of compressed data +# Formats for "compress" proper have been moved into "compress.c", +# because it tries to uncompress it to figure out what's inside. + +# standard unix compress +0 string \037\235 application/octet-stream x-compress + +# gzip (GNU zip, not to be confused with [Info-ZIP/PKWARE] zip archiver) +0 string \037\213 application/octet-stream x-gzip + +# According to gzip.h, this is the correct byte order for packed data. +0 string \037\036 application/octet-stream +# +# This magic number is byte-order-independent. +# +0 short 017437 application/octet-stream + +# XXX - why *two* entries for "compacted data", one of which is +# byte-order independent, and one of which is byte-order dependent? +# +# compacted data +0 short 0x1fff application/octet-stream +0 string \377\037 application/octet-stream +# huf output +0 short 0145405 application/octet-stream + +# Squeeze and Crunch... +# These numbers were gleaned from the Unix versions of the programs to +# handle these formats. Note that I can only uncrunch, not crunch, and +# I didn't have a crunched file handy, so the crunch number is untested. +# Keith Waclena +#0 leshort 0x76FF squeezed data (CP/M, DOS) +#0 leshort 0x76FE crunched data (CP/M, DOS) + +# Freeze +#0 string \037\237 Frozen file 2.1 +#0 string \037\236 Frozen file 1.0 (or gzip 0.5) + +# lzh? +#0 string \037\240 LZH compressed data + +#------------------------------------------------------------------------------ +# frame: file(1) magic for FrameMaker files +# +# This stuff came on a FrameMaker demo tape, most of which is +# copyright, but this file is "published" as witness the following: +# +0 string \ +# and Anna Shergold +# +0 string \ +0 string \14 byte 12 (OS/2 1.x format) +#>14 byte 64 (OS/2 2.x format) +#>14 byte 40 (Windows 3.x format) +#0 string IC icon +#0 string PI pointer +#0 string CI color icon +#0 string CP color pointer +#0 string BA bitmap array + +0 string \x89PNG image/png +0 string FWS application/x-shockwave-flash +0 string CWS application/x-shockwave-flash + +#------------------------------------------------------------------------------ +# lisp: file(1) magic for lisp programs +# +# various lisp types, from Daniel Quinlan (quinlan@yggdrasil.com) +0 string ;; text/plain 8bit +# Emacs 18 - this is always correct, but not very magical. +0 string \012( application/x-elc +# Emacs 19 +0 string ;ELC\023\000\000\000 application/x-elc + +#------------------------------------------------------------------------------ +# mail.news: file(1) magic for mail and news +# +# There are tests to ascmagic.c to cope with mail and news. +0 string Relay-Version: message/rfc822 7bit +0 string #!\ rnews message/rfc822 7bit +0 string N#!\ rnews message/rfc822 7bit +0 string Forward\ to message/rfc822 7bit +0 string Pipe\ to message/rfc822 7bit +0 string Return-Path: message/rfc822 7bit +0 string Path: message/news 8bit +0 string Xref: message/news 8bit +0 string From: message/rfc822 7bit +0 string Article message/news 8bit +#------------------------------------------------------------------------------ +# msword: file(1) magic for MS Word files +# +# Contributor claims: +# Reversed-engineered MS Word magic numbers +# + +0 string \376\067\0\043 application/msword +0 string \333\245-\0\0\0 application/msword + +# disable this one because it applies also to other +# Office/OLE documents for which msword is not correct. See PR#2608. +#0 string \320\317\021\340\241\261 application/msword + + + +#------------------------------------------------------------------------------ +# printer: file(1) magic for printer-formatted files +# + +# PostScript +0 string %! application/postscript +0 string \004%! application/postscript + +# Acrobat +# (due to clamen@cs.cmu.edu) +0 string %PDF- application/pdf + +#------------------------------------------------------------------------------ +# sc: file(1) magic for "sc" spreadsheet +# +38 string Spreadsheet application/x-sc + +#------------------------------------------------------------------------------ +# tex: file(1) magic for TeX files +# +# XXX - needs byte-endian stuff (big-endian and little-endian DVI?) +# +# From + +# Although we may know the offset of certain text fields in TeX DVI +# and font files, we can't use them reliably because they are not +# zero terminated. [but we do anyway, christos] +0 string \367\002 application/x-dvi +#0 string \367\203 TeX generic font data +#0 string \367\131 TeX packed font data +#0 string \367\312 TeX virtual font data +#0 string This\ is\ TeX, TeX transcript text +#0 string This\ is\ METAFONT, METAFONT transcript text + +# There is no way to detect TeX Font Metric (*.tfm) files without +# breaking them apart and reading the data. The following patterns +# match most *.tfm files generated by METAFONT or afm2tfm. +#2 string \000\021 TeX font metric data +#2 string \000\022 TeX font metric data +#>34 string >\0 (%s) + +# Texinfo and GNU Info, from Daniel Quinlan (quinlan@yggdrasil.com) +#0 string \\input\ texinfo Texinfo source text +#0 string This\ is\ Info\ file GNU Info text + +# correct TeX magic for Linux (and maybe more) +# from Peter Tobias (tobias@server.et-inf.fho-emden.de) +# +0 leshort 0x02f7 application/x-dvi + +# RTF - Rich Text Format +0 string {\\rtf application/rtf + +#------------------------------------------------------------------------------ +# animation: file(1) magic for animation/movie formats +# +# animation formats, originally from vax@ccwf.cc.utexas.edu (VaX#n8) +# MPEG file +0 string \000\000\001\263 video/mpeg +# +# The contributor claims: +# I couldn't find a real magic number for these, however, this +# -appears- to work. Note that it might catch other files, too, +# so BE CAREFUL! +# +# Note that title and author appear in the two 20-byte chunks +# at decimal offsets 2 and 22, respectively, but they are XOR'ed with +# 255 (hex FF)! DL format SUCKS BIG ROCKS. +# +# DL file version 1 , medium format (160x100, 4 images/screen) +0 byte 1 video/unknown +0 byte 2 video/unknown +# Quicktime video, from Linus Walleij +# from Apple quicktime file format documentation. +4 string moov video/quicktime +4 string mdat video/quicktime + diff --git a/setup/projects/katrin/files/etc/apache2-kaas-docker/extra/httpd-autoindex.conf b/setup/projects/katrin/files/etc/apache2-kaas-docker/extra/httpd-autoindex.conf new file mode 100644 index 0000000..c581e97 --- /dev/null +++ b/setup/projects/katrin/files/etc/apache2-kaas-docker/extra/httpd-autoindex.conf @@ -0,0 +1,93 @@ +# +# Directives controlling the display of server-generated directory listings. +# +# Required modules: mod_autoindex, mod_alias +# +# To see the listing of a directory, the Options directive for the +# directory must include "Indexes", and the directory must not contain +# a file matching those listed in the DirectoryIndex directive. +# + +# +# IndexOptions: Controls the appearance of server-generated directory +# listings. +# +IndexOptions FancyIndexing HTMLTable VersionSort + +# We include the /icons/ alias for FancyIndexed directory listings. If +# you do not use FancyIndexing, you may comment this out. +# +Alias /icons/ "/usr/local/apache2/icons/" + + + Options Indexes MultiViews + AllowOverride None + Order allow,deny + Allow from all + + +# +# AddIcon* directives tell the server which icon to show for different +# files or filename extensions. These are only displayed for +# FancyIndexed directories. +# +AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip + +AddIconByType (TXT,/icons/text.gif) text/* +AddIconByType (IMG,/icons/image2.gif) image/* +AddIconByType (SND,/icons/sound2.gif) audio/* +AddIconByType (VID,/icons/movie.gif) video/* + +AddIcon /icons/binary.gif .bin .exe +AddIcon /icons/binhex.gif .hqx +AddIcon /icons/tar.gif .tar +AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv +AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip +AddIcon /icons/a.gif .ps .ai .eps +AddIcon /icons/layout.gif .html .shtml .htm .pdf +AddIcon /icons/text.gif .txt +AddIcon /icons/c.gif .c +AddIcon /icons/p.gif .pl .py +AddIcon /icons/f.gif .for +AddIcon /icons/dvi.gif .dvi +AddIcon /icons/uuencoded.gif .uu +AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl +AddIcon /icons/tex.gif .tex +AddIcon /icons/bomb.gif core + +AddIcon /icons/back.gif .. +AddIcon /icons/hand.right.gif README +AddIcon /icons/folder.gif ^^DIRECTORY^^ +AddIcon /icons/blank.gif ^^BLANKICON^^ + +# +# DefaultIcon is which icon to show for files which do not have an icon +# explicitly set. +# +DefaultIcon /icons/unknown.gif + +# +# AddDescription allows you to place a short description after a file in +# server-generated indexes. These are only displayed for FancyIndexed +# directories. +# Format: AddDescription "description" filename +# +#AddDescription "GZIP compressed document" .gz +#AddDescription "tar archive" .tar +#AddDescription "GZIP compressed tar archive" .tgz + +# +# ReadmeName is the name of the README file the server will look for by +# default, and append to directory listings. +# +# HeaderName is the name of a file which should be prepended to +# directory indexes. +ReadmeName README.html +HeaderName HEADER.html + +# +# IndexIgnore is a set of filenames which directory indexing should ignore +# and not include in the listing. Shell-style wildcarding is permitted. +# +IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t + diff --git a/setup/projects/katrin/files/etc/apache2-kaas-docker/extra/httpd-dav.conf b/setup/projects/katrin/files/etc/apache2-kaas-docker/extra/httpd-dav.conf new file mode 100644 index 0000000..29dfb72 --- /dev/null +++ b/setup/projects/katrin/files/etc/apache2-kaas-docker/extra/httpd-dav.conf @@ -0,0 +1,52 @@ +# +# Distributed authoring and versioning (WebDAV) +# +# Required modules: mod_dav, mod_dav_fs, mod_setenvif, mod_alias +# mod_auth_digest, mod_authn_file +# + +# The following example gives DAV write access to a directory called +# "uploads" under the ServerRoot directory. +# +# The User/Group specified in httpd.conf needs to have write permissions +# on the directory where the DavLockDB is placed and on any directory where +# "Dav On" is specified. + +DavLockDB "/usr/local/apache2/var/DavLock" + +Alias /uploads "/usr/local/apache2/uploads" + + + Dav On + + Order Allow,Deny + Allow from all + + AuthType Digest + AuthName DAV-upload + + # You can use the htdigest program to create the password database: + # htdigest -c "/usr/local/apache2/user.passwd" DAV-upload admin + AuthUserFile "/usr/local/apache2/user.passwd" + AuthDigestProvider file + + # Allow universal read-access, but writes are restricted + # to the admin user. + + require user admin + + + +# +# The following directives disable redirects on non-GET requests for +# a directory that does not include the trailing slash. This fixes a +# problem with several clients that do not appropriately handle +# redirects for folders with DAV methods. +# +BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully +BrowserMatch "MS FrontPage" redirect-carefully +BrowserMatch "^WebDrive" redirect-carefully +BrowserMatch "^WebDAVFS/1.[0123]" redirect-carefully +BrowserMatch "^gnome-vfs/1.0" redirect-carefully +BrowserMatch "^XML Spy" redirect-carefully +BrowserMatch "^Dreamweaver-WebDAV-SCM1" redirect-carefully diff --git a/setup/projects/katrin/files/etc/apache2-kaas-docker/extra/httpd-default.conf b/setup/projects/katrin/files/etc/apache2-kaas-docker/extra/httpd-default.conf new file mode 100644 index 0000000..efeca05 --- /dev/null +++ b/setup/projects/katrin/files/etc/apache2-kaas-docker/extra/httpd-default.conf @@ -0,0 +1,75 @@ +# +# This configuration file reflects default settings for Apache HTTP Server. +# +# You may change these, but chances are that you may not need to. +# + +# +# Timeout: The number of seconds before receives and sends time out. +# +Timeout 300 + +# +# KeepAlive: Whether or not to allow persistent connections (more than +# one request per connection). Set to "Off" to deactivate. +# +KeepAlive On + +# +# MaxKeepAliveRequests: The maximum number of requests to allow +# during a persistent connection. Set to 0 to allow an unlimited amount. +# We recommend you leave this number high, for maximum performance. +# +MaxKeepAliveRequests 100 + +# +# KeepAliveTimeout: Number of seconds to wait for the next request from the +# same client on the same connection. +# +KeepAliveTimeout 5 + +# +# UseCanonicalName: Determines how Apache constructs self-referencing +# URLs and the SERVER_NAME and SERVER_PORT variables. +# When set "Off", Apache will use the Hostname and Port supplied +# by the client. When set "On", Apache will use the value of the +# ServerName directive. +# +UseCanonicalName Off + +# +# AccessFileName: The name of the file to look for in each directory +# for additional configuration directives. See also the AllowOverride +# directive. +# +AccessFileName .htaccess + +# +# ServerTokens +# This directive configures what you return as the Server HTTP response +# Header. The default is 'Full' which sends information about the OS-Type +# and compiled in modules. +# Set to one of: Full | OS | Minor | Minimal | Major | Prod +# where Full conveys the most information, and Prod the least. +# +ServerTokens Full + +# +# Optionally add a line containing the server version and virtual host +# name to server-generated pages (internal error documents, FTP directory +# listings, mod_status and mod_info output etc., but not CGI generated +# documents or custom error documents). +# Set to "EMail" to also include a mailto: link to the ServerAdmin. +# Set to one of: On | Off | EMail +# +ServerSignature On + +# +# HostnameLookups: Log the names of clients or just their IP addresses +# e.g., www.apache.org (on) or 204.62.129.132 (off). +# The default is off because it'd be overall better for the net if people +# had to knowingly turn this feature on, since enabling it means that +# each client request will result in AT LEAST one lookup request to the +# nameserver. +# +HostnameLookups Off diff --git a/setup/projects/katrin/files/etc/apache2-kaas-docker/extra/httpd-info.conf b/setup/projects/katrin/files/etc/apache2-kaas-docker/extra/httpd-info.conf new file mode 100644 index 0000000..db316c0 --- /dev/null +++ b/setup/projects/katrin/files/etc/apache2-kaas-docker/extra/httpd-info.conf @@ -0,0 +1,37 @@ +# +# Get information about the requests being processed by the server +# and the configuration of the server. +# +# Required modules: mod_status (for the server-status handler), +# mod_info (for the server-info handler) + +# +# Allow server status reports generated by mod_status, +# with the URL of http://servername/server-status +# Change the ".example.com" to match your domain to enable. + + + SetHandler server-status + Order deny,allow + Deny from all + Allow from .example.com + + +# +# ExtendedStatus controls whether Apache will generate "full" status +# information (ExtendedStatus On) or just basic information (ExtendedStatus +# Off) when the "server-status" handler is called. The default is Off. +# +#ExtendedStatus On + +# +# Allow remote server configuration reports, with the URL of +# http://servername/server-info (requires that mod_info.c be loaded). +# Change the ".example.com" to match your domain to enable. +# + + SetHandler server-info + Order deny,allow + Deny from all + Allow from .example.com + diff --git a/setup/projects/katrin/files/etc/apache2-kaas-docker/extra/httpd-languages.conf b/setup/projects/katrin/files/etc/apache2-kaas-docker/extra/httpd-languages.conf new file mode 100644 index 0000000..7f66461 --- /dev/null +++ b/setup/projects/katrin/files/etc/apache2-kaas-docker/extra/httpd-languages.conf @@ -0,0 +1,141 @@ +# +# Settings for hosting different languages. +# +# Required modules: mod_mime, mod_negotiation + +# DefaultLanguage and AddLanguage allows you to specify the language of +# a document. You can then use content negotiation to give a browser a +# file in a language the user can understand. +# +# Specify a default language. This means that all data +# going out without a specific language tag (see below) will +# be marked with this one. You probably do NOT want to set +# this unless you are sure it is correct for all cases. +# +# * It is generally better to not mark a page as +# * being a certain language than marking it with the wrong +# * language! +# +# DefaultLanguage nl +# +# Note 1: The suffix does not have to be the same as the language +# keyword --- those with documents in Polish (whose net-standard +# language code is pl) may wish to use "AddLanguage pl .po" to +# avoid the ambiguity with the common suffix for perl scripts. +# +# Note 2: The example entries below illustrate that in some cases +# the two character 'Language' abbreviation is not identical to +# the two character 'Country' code for its country, +# E.g. 'Danmark/dk' versus 'Danish/da'. +# +# Note 3: In the case of 'ltz' we violate the RFC by using a three char +# specifier. There is 'work in progress' to fix this and get +# the reference data for rfc1766 cleaned up. +# +# Catalan (ca) - Croatian (hr) - Czech (cs) - Danish (da) - Dutch (nl) +# English (en) - Esperanto (eo) - Estonian (et) - French (fr) - German (de) +# Greek-Modern (el) - Hebrew (he) - Italian (it) - Japanese (ja) +# Korean (ko) - Luxembourgeois* (ltz) - Norwegian Nynorsk (nn) +# Norwegian (no) - Polish (pl) - Portugese (pt) +# Brazilian Portuguese (pt-BR) - Russian (ru) - Swedish (sv) +# Turkish (tr) - Simplified Chinese (zh-CN) - Spanish (es) +# Traditional Chinese (zh-TW) +# +AddLanguage ca .ca +AddLanguage cs .cz .cs +AddLanguage da .dk +AddLanguage de .de +AddLanguage el .el +AddLanguage en .en +AddLanguage eo .eo +AddLanguage es .es +AddLanguage et .et +AddLanguage fr .fr +AddLanguage he .he +AddLanguage hr .hr +AddLanguage it .it +AddLanguage ja .ja +AddLanguage ko .ko +AddLanguage ltz .ltz +AddLanguage nl .nl +AddLanguage nn .nn +AddLanguage no .no +AddLanguage pl .po +AddLanguage pt .pt +AddLanguage pt-BR .pt-br +AddLanguage ru .ru +AddLanguage sv .sv +AddLanguage tr .tr +AddLanguage zh-CN .zh-cn +AddLanguage zh-TW .zh-tw + +# LanguagePriority allows you to give precedence to some languages +# in case of a tie during content negotiation. +# +# Just list the languages in decreasing order of preference. We have +# more or less alphabetized them here. You probably want to change this. +# +LanguagePriority en ca cs da de el eo es et fr he hr it ja ko ltz nl nn no pl pt pt-BR ru sv tr zh-CN zh-TW + +# +# ForceLanguagePriority allows you to serve a result page rather than +# MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE (Fallback) +# [in case no accepted languages matched the available variants] +# +ForceLanguagePriority Prefer Fallback + +# +# Commonly used filename extensions to character sets. You probably +# want to avoid clashes with the language extensions, unless you +# are good at carefully testing your setup after each change. +# See http://www.iana.org/assignments/character-sets for the +# official list of charset names and their respective RFCs. +# +AddCharset us-ascii.ascii .us-ascii +AddCharset ISO-8859-1 .iso8859-1 .latin1 +AddCharset ISO-8859-2 .iso8859-2 .latin2 .cen +AddCharset ISO-8859-3 .iso8859-3 .latin3 +AddCharset ISO-8859-4 .iso8859-4 .latin4 +AddCharset ISO-8859-5 .iso8859-5 .cyr .iso-ru +AddCharset ISO-8859-6 .iso8859-6 .arb .arabic +AddCharset ISO-8859-7 .iso8859-7 .grk .greek +AddCharset ISO-8859-8 .iso8859-8 .heb .hebrew +AddCharset ISO-8859-9 .iso8859-9 .latin5 .trk +AddCharset ISO-8859-10 .iso8859-10 .latin6 +AddCharset ISO-8859-13 .iso8859-13 +AddCharset ISO-8859-14 .iso8859-14 .latin8 +AddCharset ISO-8859-15 .iso8859-15 .latin9 +AddCharset ISO-8859-16 .iso8859-16 .latin10 +AddCharset ISO-2022-JP .iso2022-jp .jis +AddCharset ISO-2022-KR .iso2022-kr .kis +AddCharset ISO-2022-CN .iso2022-cn .cis +AddCharset Big5.Big5 .big5 .b5 +AddCharset cn-Big5 .cn-big5 +# For russian, more than one charset is used (depends on client, mostly): +AddCharset WINDOWS-1251 .cp-1251 .win-1251 +AddCharset CP866 .cp866 +AddCharset KOI8 .koi8 +AddCharset KOI8-E .koi8-e +AddCharset KOI8-r .koi8-r .koi8-ru +AddCharset KOI8-U .koi8-u +AddCharset KOI8-ru .koi8-uk .ua +AddCharset ISO-10646-UCS-2 .ucs2 +AddCharset ISO-10646-UCS-4 .ucs4 +AddCharset UTF-7 .utf7 +AddCharset UTF-8 .utf8 +AddCharset UTF-16 .utf16 +AddCharset UTF-16BE .utf16be +AddCharset UTF-16LE .utf16le +AddCharset UTF-32 .utf32 +AddCharset UTF-32BE .utf32be +AddCharset UTF-32LE .utf32le +AddCharset euc-cn .euc-cn +AddCharset euc-gb .euc-gb +AddCharset euc-jp .euc-jp +AddCharset euc-kr .euc-kr +#Not sure how euc-tw got in - IANA doesn't list it??? +AddCharset EUC-TW .euc-tw +AddCharset gb2312 .gb2312 .gb +AddCharset iso-10646-ucs-2 .ucs-2 .iso-10646-ucs-2 +AddCharset iso-10646-ucs-4 .ucs-4 .iso-10646-ucs-4 +AddCharset shift_jis .shift_jis .sjis diff --git a/setup/projects/katrin/files/etc/apache2-kaas-docker/extra/httpd-manual.conf b/setup/projects/katrin/files/etc/apache2-kaas-docker/extra/httpd-manual.conf new file mode 100644 index 0000000..fc12fb9 --- /dev/null +++ b/setup/projects/katrin/files/etc/apache2-kaas-docker/extra/httpd-manual.conf @@ -0,0 +1,31 @@ +# +# Provide access to the documentation on your server as +# http://yourserver.example.com/manual/ +# The documentation is always available at +# http://httpd.apache.org/docs/2.2/ +# +# Required modules: mod_alias, mod_setenvif, mod_negotiation +# + +AliasMatch ^/manual(?:/(?:de|en|es|fr|ja|ko|pt-br|ru|tr))?(/.*)?$ "/usr/local/apache2/manual$1" + + + Options Indexes + AllowOverride None + Order allow,deny + Allow from all + + + SetHandler type-map + + # .tr is text/troff in mime.types! + + ForceType "text/html; charset=utf-8" + + + SetEnvIf Request_URI ^/manual/(de|en|es|fr|ja|ko|pt-br|ru|tr)/ prefer-language=$1 + RedirectMatch 301 ^/manual(?:/(de|en|es|fr|ja|ko|pt-br|ru|tr)){2,}(/.*)?$ /manual/$1$2 + + LanguagePriority en de es fr ja ko pt-br ru tr + ForceLanguagePriority Prefer Fallback + diff --git a/setup/projects/katrin/files/etc/apache2-kaas-docker/extra/httpd-mpm.conf b/setup/projects/katrin/files/etc/apache2-kaas-docker/extra/httpd-mpm.conf new file mode 100644 index 0000000..8c44c60 --- /dev/null +++ b/setup/projects/katrin/files/etc/apache2-kaas-docker/extra/httpd-mpm.conf @@ -0,0 +1,110 @@ +# +# Server-Pool Management (MPM specific) +# + +# +# PidFile: The file in which the server should record its process +# identification number when it starts. +# +# Note that this is the default PidFile for most MPMs. +# + + PidFile "logs/httpd.pid" + + +# +# The accept serialization lock file MUST BE STORED ON A LOCAL DISK. +# + + +LockFile "logs/accept.lock" + + + +# +# Only one of the below sections will be relevant on your +# installed httpd. Use "apachectl -l" to find out the +# active mpm. +# + +# prefork MPM +# StartServers: number of server processes to start +# MinSpareServers: minimum number of server processes which are kept spare +# MaxSpareServers: maximum number of server processes which are kept spare +# MaxClients: maximum number of server processes allowed to start +# MaxRequestsPerChild: maximum number of requests a server process serves + + StartServers 5 + MinSpareServers 5 + MaxSpareServers 10 + MaxClients 150 + MaxRequestsPerChild 0 + + +# worker MPM +# StartServers: initial number of server processes to start +# MaxClients: maximum number of simultaneous client connections +# MinSpareThreads: minimum number of worker threads which are kept spare +# MaxSpareThreads: maximum number of worker threads which are kept spare +# ThreadsPerChild: constant number of worker threads in each server process +# MaxRequestsPerChild: maximum number of requests a server process serves + + StartServers 2 + MaxClients 150 + MinSpareThreads 25 + MaxSpareThreads 75 + ThreadsPerChild 25 + MaxRequestsPerChild 0 + + +# BeOS MPM +# StartThreads: how many threads do we initially spawn? +# MaxClients: max number of threads we can have (1 thread == 1 client) +# MaxRequestsPerThread: maximum number of requests each thread will process + + StartThreads 10 + MaxClients 50 + MaxRequestsPerThread 10000 + + +# NetWare MPM +# ThreadStackSize: Stack size allocated for each worker thread +# StartThreads: Number of worker threads launched at server startup +# MinSpareThreads: Minimum number of idle threads, to handle request spikes +# MaxSpareThreads: Maximum number of idle threads +# MaxThreads: Maximum number of worker threads alive at the same time +# MaxRequestsPerChild: Maximum number of requests a thread serves. It is +# recommended that the default value of 0 be set for this +# directive on NetWare. This will allow the thread to +# continue to service requests indefinitely. + + ThreadStackSize 65536 + StartThreads 250 + MinSpareThreads 25 + MaxSpareThreads 250 + MaxThreads 1000 + MaxRequestsPerChild 0 + MaxMemFree 100 + + +# OS/2 MPM +# StartServers: Number of server processes to maintain +# MinSpareThreads: Minimum number of idle threads per process, +# to handle request spikes +# MaxSpareThreads: Maximum number of idle threads per process +# MaxRequestsPerChild: Maximum number of connections per server process + + StartServers 2 + MinSpareThreads 5 + MaxSpareThreads 10 + MaxRequestsPerChild 0 + + +# WinNT MPM +# ThreadsPerChild: constant number of worker threads in the server process +# MaxRequestsPerChild: maximum number of requests a server process serves + + ThreadsPerChild 150 + MaxRequestsPerChild 0 + + diff --git a/setup/projects/katrin/files/etc/apache2-kaas-docker/extra/httpd-multilang-errordoc.conf b/setup/projects/katrin/files/etc/apache2-kaas-docker/extra/httpd-multilang-errordoc.conf new file mode 100644 index 0000000..8ff9a45 --- /dev/null +++ b/setup/projects/katrin/files/etc/apache2-kaas-docker/extra/httpd-multilang-errordoc.conf @@ -0,0 +1,52 @@ +# +# The configuration below implements multi-language error documents through +# content-negotiation. +# +# Required modules: mod_alias, mod_include, mod_negotiation +# +# We use Alias to redirect any /error/HTTP_.html.var response to +# our collection of by-error message multi-language collections. We use +# includes to substitute the appropriate text. +# +# You can modify the messages' appearance without changing any of the +# default HTTP_.html.var files by adding the line: +# +# Alias /error/include/ "/your/include/path/" +# +# which allows you to create your own set of files by starting with the +# /usr/local/apache2/error/include/ files and copying them to /your/include/path/, +# even on a per-VirtualHost basis. The default include files will display +# your Apache version number and your ServerAdmin email address regardless +# of the setting of ServerSignature. + +Alias /error/ "/usr/local/apache2/error/" + + + AllowOverride None + Options IncludesNoExec + AddOutputFilter Includes html + AddHandler type-map var + Order allow,deny + Allow from all + LanguagePriority en cs de es fr it ja ko nl pl pt-br ro sv tr + ForceLanguagePriority Prefer Fallback + + +ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var +ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var +ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var +ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var +ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var +ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var +ErrorDocument 410 /error/HTTP_GONE.html.var +ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var +ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var +ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var +ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var +ErrorDocument 415 /error/HTTP_UNSUPPORTED_MEDIA_TYPE.html.var +ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var +ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var +ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var +ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var +ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var + diff --git a/setup/projects/katrin/files/etc/apache2-kaas-docker/extra/httpd-ssl.conf b/setup/projects/katrin/files/etc/apache2-kaas-docker/extra/httpd-ssl.conf new file mode 100644 index 0000000..f8c023e --- /dev/null +++ b/setup/projects/katrin/files/etc/apache2-kaas-docker/extra/httpd-ssl.conf @@ -0,0 +1,269 @@ +# +# This is the Apache server configuration file providing SSL support. +# It contains the configuration directives to instruct the server how to +# serve pages over an https connection. For detailed information about these +# directives see +# +# Do NOT simply read the instructions in here without understanding +# what they do. They're here only as hints or reminders. If you are unsure +# consult the online docs. You have been warned. +# + +# +# Pseudo Random Number Generator (PRNG): +# Configure one or more sources to seed the PRNG of the SSL library. +# The seed data should be of good random quality. +# WARNING! On some platforms /dev/random blocks if not enough entropy +# is available. This means you then cannot use the /dev/random device +# because it would lead to very long connection times (as long as +# it requires to make more entropy available). But usually those +# platforms additionally provide a /dev/urandom device which doesn't +# block. So, if available, use this one instead. Read the mod_ssl User +# Manual for more details. +# +#SSLRandomSeed startup file:/dev/random 512 +#SSLRandomSeed startup file:/dev/urandom 512 +#SSLRandomSeed connect file:/dev/random 512 +#SSLRandomSeed connect file:/dev/urandom 512 + + +# +# When we also provide SSL we have to listen to the +# standard HTTP port (see above) and to the HTTPS port +# +# Note: Configurations that use IPv6 but not IPv4-mapped addresses need two +# Listen directives: "Listen [::]:443" and "Listen 0.0.0.0:443" +# +Listen 8443 + +## +## SSL Global Context +## +## All SSL configuration in this context applies both to +## the main server and all SSL-enabled virtual hosts. +## + +# +# Some MIME-types for downloading Certificates and CRLs +# +AddType application/x-x509-ca-cert .crt +AddType application/x-pkcs7-crl .crl + +# SSL Cipher Suite: +# List the ciphers that the client is permitted to negotiate, +# and that httpd will negotiate as the client of a proxied server. +# See the OpenSSL documentation for a complete list of ciphers, and +# ensure these follow appropriate best practices for this deployment. +# httpd 2.2.30, 2.4.13 and later force-disable aNULL, eNULL and EXP ciphers, +# while OpenSSL disabled these by default in 0.9.8zf/1.0.0r/1.0.1m/1.0.2a. +SSLCipherSuite HIGH:MEDIUM:!MD5:!RC4 +SSLProxyCipherSuite HIGH:MEDIUM:!MD5:!RC4 + +# By the end of 2016, only TLSv1.2 ciphers should remain in use. +# Older ciphers should be disallowed as soon as possible, while the +# kRSA ciphers do not offer forward secrecy. These changes inhibit +# older clients (such as IE6 SP2 or IE8 on Windows XP, or other legacy +# non-browser tooling) from successfully connecting. +# +# To restrict mod_ssl to use only TLSv1.2 ciphers, and disable +# those protocols which do not support forward secrecy, replace +# the SSLCipherSuite and SSLProxyCipherSuite directives above with +# the following two directives, as soon as practical. +# SSLCipherSuite HIGH:MEDIUM:!SSLv3:!kRSA +# SSLProxyCipherSuite HIGH:MEDIUM:!SSLv3:!kRSA + +# User agents such as web browsers are not configured for the user's +# own preference of either security or performance, therefore this +# must be the prerogative of the web server administrator who manages +# cpu load versus confidentiality, so enforce the server's cipher order. +SSLHonorCipherOrder on + +# SSL Protocol support: +# List the protocol versions which clients are allowed to connect with. +# Disable SSLv2 and SSLv3 by default (cf. RFC 7525 3.1.1). TLSv1 (1.0) +# should be disabled as quickly as practical. By the end of 2016, only +# the TLSv1.2 protocol or later should remain in use. +SSLProtocol all -SSLv2 -SSLv3 +SSLProxyProtocol all -SSLv2 -SSLv3 + +# Pass Phrase Dialog: +# Configure the pass phrase gathering process. +# The filtering dialog program (`builtin' is a internal +# terminal dialog) has to provide the pass phrase on stdout. +SSLPassPhraseDialog builtin + +# Inter-Process Session Cache: +# Configure the SSL Session Cache: First the mechanism +# to use and second the expiring timeout (in seconds). +#SSLSessionCache "dbm:/usr/local/apache2/logs/ssl_scache" +SSLSessionCache "shmcb:/usr/local/apache2/logs/ssl_scache(512000)" +SSLSessionCacheTimeout 300 + +# Semaphore: +# Configure the path to the mutual exclusion semaphore the +# SSL engine uses internally for inter-process synchronization. +SSLMutex "file:/usr/local/apache2/logs/ssl_mutex" + +## +## SSL Virtual Host Context +## + + + +# General setup for the virtual host +DocumentRoot "/usr/local/apache2/htdocs" +ServerName www.example.com:443 +ServerAdmin you@example.com +ErrorLog "/usr/local/apache2/logs/error_log" +TransferLog "/usr/local/apache2/logs/access_log" + +# SSL Engine Switch: +# Enable/Disable SSL for this virtual host. +SSLEngine on + +# Server Certificate: +# Point SSLCertificateFile at a PEM encoded certificate. If +# the certificate is encrypted, then you will be prompted for a +# pass phrase. Note that a kill -HUP will prompt again. Keep +# in mind that if you have both an RSA and a DSA certificate you +# can configure both in parallel (to also allow the use of DSA +# ciphers, etc.) +# Some ECC cipher suites (http://www.ietf.org/rfc/rfc4492.txt) +# require an ECC certificate which can also be configured in +# parallel. +SSLCertificateFile "/usr/local/apache2/conf/server.crt" +#SSLCertificateFile "/usr/local/apache2/conf/server-dsa.crt" +#SSLCertificateFile "/usr/local/apache2/conf/server-ecc.crt" + +# Server Private Key: +# If the key is not combined with the certificate, use this +# directive to point at the key file. Keep in mind that if +# you've both a RSA and a DSA private key you can configure +# both in parallel (to also allow the use of DSA ciphers, etc.) +# ECC keys, when in use, can also be configured in parallel +SSLCertificateKeyFile "/usr/local/apache2/conf/server.key" +#SSLCertificateKeyFile "/usr/local/apache2/conf/server-dsa.key" +#SSLCertificateKeyFile "/usr/local/apache2/conf/server-ecc.key" + +# Server Certificate Chain: +# Point SSLCertificateChainFile at a file containing the +# concatenation of PEM encoded CA certificates which form the +# certificate chain for the server certificate. Alternatively +# the referenced file can be the same as SSLCertificateFile +# when the CA certificates are directly appended to the server +# certificate for convenience. +#SSLCertificateChainFile "/usr/local/apache2/conf/server-ca.crt" + +# Certificate Authority (CA): +# Set the CA certificate verification path where to find CA +# certificates for client authentication or alternatively one +# huge file containing all of them (file must be PEM encoded) +# Note: Inside SSLCACertificatePath you need hash symlinks +# to point to the certificate files. Use the provided +# Makefile to update the hash symlinks after changes. +#SSLCACertificatePath "/usr/local/apache2/conf/ssl.crt" +#SSLCACertificateFile "/usr/local/apache2/conf/ssl.crt/ca-bundle.crt" + +# Certificate Revocation Lists (CRL): +# Set the CA revocation path where to find CA CRLs for client +# authentication or alternatively one huge file containing all +# of them (file must be PEM encoded) +# Note: Inside SSLCARevocationPath you need hash symlinks +# to point to the certificate files. Use the provided +# Makefile to update the hash symlinks after changes. +#SSLCARevocationPath "/usr/local/apache2/conf/ssl.crl" +#SSLCARevocationFile "/usr/local/apache2/conf/ssl.crl/ca-bundle.crl" + +# Client Authentication (Type): +# Client certificate verification type and depth. Types are +# none, optional, require and optional_no_ca. Depth is a +# number which specifies how deeply to verify the certificate +# issuer chain before deciding the certificate is not valid. +#SSLVerifyClient require +#SSLVerifyDepth 10 + +# Access Control: +# With SSLRequire you can do per-directory access control based +# on arbitrary complex boolean expressions containing server +# variable checks and other lookup directives. The syntax is a +# mixture between C and Perl. See the mod_ssl documentation +# for more details. +# +#SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \ +# and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \ +# and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \ +# and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \ +# and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \ +# or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/ +# + +# SSL Engine Options: +# Set various options for the SSL engine. +# o FakeBasicAuth: +# Translate the client X.509 into a Basic Authorisation. This means that +# the standard Auth/DBMAuth methods can be used for access control. The +# user name is the `one line' version of the client's X.509 certificate. +# Note that no password is obtained from the user. Every entry in the user +# file needs this password: `xxj31ZMTZzkVA'. +# o ExportCertData: +# This exports two additional environment variables: SSL_CLIENT_CERT and +# SSL_SERVER_CERT. These contain the PEM-encoded certificates of the +# server (always existing) and the client (only existing when client +# authentication is used). This can be used to import the certificates +# into CGI scripts. +# o StdEnvVars: +# This exports the standard SSL/TLS related `SSL_*' environment variables. +# Per default this exportation is switched off for performance reasons, +# because the extraction step is an expensive operation and is usually +# useless for serving static content. So one usually enables the +# exportation for CGI and SSI requests only. +# o StrictRequire: +# This denies access when "SSLRequireSSL" or "SSLRequire" applied even +# under a "Satisfy any" situation, i.e. when it applies access is denied +# and no other module can change it. +# o OptRenegotiate: +# This enables optimized SSL connection renegotiation handling when SSL +# directives are used in per-directory context. +#SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire + + SSLOptions +StdEnvVars + + + SSLOptions +StdEnvVars + + +# SSL Protocol Adjustments: +# The safe and default but still SSL/TLS standard compliant shutdown +# approach is that mod_ssl sends the close notify alert but doesn't wait for +# the close notify alert from client. When you need a different shutdown +# approach you can use one of the following variables: +# o ssl-unclean-shutdown: +# This forces an unclean shutdown when the connection is closed, i.e. no +# SSL close notify alert is sent or allowed to be received. This violates +# the SSL/TLS standard but is needed for some brain-dead browsers. Use +# this when you receive I/O errors because of the standard approach where +# mod_ssl sends the close notify alert. +# o ssl-accurate-shutdown: +# This forces an accurate shutdown when the connection is closed, i.e. a +# SSL close notify alert is send and mod_ssl waits for the close notify +# alert of the client. This is 100% SSL/TLS standard compliant, but in +# practice often causes hanging connections with brain-dead browsers. Use +# this only for browsers where you know that their SSL implementation +# works correctly. +# Notice: Most problems of broken clients are also related to the HTTP +# keep-alive facility, so you usually additionally want to disable +# keep-alive for those clients, too. Use variable "nokeepalive" for this. +# Similarly, one has to force some clients to use HTTP/1.0 to workaround +# their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and +# "force-response-1.0" for this. +BrowserMatch "MSIE [2-5]" \ + nokeepalive ssl-unclean-shutdown \ + downgrade-1.0 force-response-1.0 + +# Per-Server Logging: +# The home of a custom SSL log file. Use this when you want a +# compact non-error SSL logfile on a virtual host basis. +CustomLog "/usr/local/apache2/logs/ssl_request_log" \ + "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b" + + diff --git a/setup/projects/katrin/files/etc/apache2-kaas-docker/extra/httpd-userdir.conf b/setup/projects/katrin/files/etc/apache2-kaas-docker/extra/httpd-userdir.conf new file mode 100644 index 0000000..567bd6d --- /dev/null +++ b/setup/projects/katrin/files/etc/apache2-kaas-docker/extra/httpd-userdir.conf @@ -0,0 +1,28 @@ +# Settings for user home directories +# +# Required module: mod_userdir + +# +# UserDir: The name of the directory that is appended onto a user's home +# directory if a ~user request is received. Note that you must also set +# the default access control for these directories, as in the example below. +# +UserDir public_html + +# +# Control access to UserDir directories. The following is an example +# for a site where these directories are restricted to read-only. +# + + AllowOverride FileInfo AuthConfig Limit Indexes + Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec + + Order allow,deny + Allow from all + + + Order deny,allow + Deny from all + + + diff --git a/setup/projects/katrin/files/etc/apache2-kaas-docker/extra/httpd-vhosts.conf b/setup/projects/katrin/files/etc/apache2-kaas-docker/extra/httpd-vhosts.conf new file mode 100644 index 0000000..01a73f3 --- /dev/null +++ b/setup/projects/katrin/files/etc/apache2-kaas-docker/extra/httpd-vhosts.conf @@ -0,0 +1,45 @@ +# +# Virtual Hosts +# +# If you want to maintain multiple domains/hostnames on your +# machine you can setup VirtualHost containers for them. Most configurations +# use only name-based virtual hosts so the server doesn't need to worry about +# IP addresses. This is indicated by the asterisks in the directives below. +# +# Please see the documentation at +# +# for further details before you try to setup virtual hosts. +# +# You may use the command line option '-S' to verify your virtual host +# configuration. + +# +# Use name-based virtual hosting. +# +NameVirtualHost *:8080 + +# +# VirtualHost example: +# Almost any Apache directive may go into a VirtualHost container. +# The first VirtualHost section is used for all requests that do not +# match a ServerName or ServerAlias in any block. +# + + ServerAdmin webmaster@dummy-host.example.com + DocumentRoot "/usr/local/apache2/docs/dummy-host.example.com" + ServerName dummy-host.example.com + ServerAlias www.dummy-host.example.com + ErrorLog "logs/dummy-host.example.com-error_log" + CustomLog "logs/dummy-host.example.com-access_log" common + + + + ServerAdmin webmaster@dummy-host2.example.com + DocumentRoot "/usr/local/apache2/docs/dummy-host2.example.com" + ServerName dummy-host2.example.com + ErrorLog "logs/dummy-host2.example.com-error_log" + CustomLog "logs/dummy-host2.example.com-access_log" common + + + + diff --git a/setup/projects/katrin/files/etc/apache2-kaas-docker/httpd.conf b/setup/projects/katrin/files/etc/apache2-kaas-docker/httpd.conf new file mode 100644 index 0000000..4b05e71 --- /dev/null +++ b/setup/projects/katrin/files/etc/apache2-kaas-docker/httpd.conf @@ -0,0 +1,496 @@ +# +# This is the main Apache HTTP server configuration file. It contains the +# configuration directives that give the server its instructions. +# See for detailed information. +# In particular, see +# +# for a discussion of each configuration directive. +# +# Do NOT simply read the instructions in here without understanding +# what they do. They're here only as hints or reminders. If you are unsure +# consult the online docs. You have been warned. +# +# Configuration and logfile names: If the filenames you specify for many +# of the server's control files begin with "/" (or "drive:/" for Win32), the +# server will use that explicit path. If the filenames do *not* begin +# with "/", the value of ServerRoot is prepended -- so 'log/access_log' +# with ServerRoot set to '/www' will be interpreted by the +# server as '/www/log/access_log', where as '/log/access_log' will be +# interpreted as '/log/access_log'. + +# +# ServerRoot: The top of the directory tree under which the server's +# configuration, error, and log files are kept. +# +# Do not add a slash at the end of the directory path. If you point +# ServerRoot at a non-local disk, be sure to point the LockFile directive +# at a local disk. If you wish to share the same ServerRoot for multiple +# httpd daemons, you will need to change at least LockFile and PidFile. +# +ServerRoot "/usr/local/apache2" + +# +# Listen: Allows you to bind Apache to specific IP addresses and/or +# ports, instead of the default. See also the +# directive. +# +# Change this to Listen on specific IP addresses as shown below to +# prevent Apache from glomming onto all bound IP addresses. +# +#Listen 12.34.56.78:80 +Listen 8080 + +# +# Dynamic Shared Object (DSO) Support +# +# To be able to use the functionality of a module which was built as a DSO you +# have to place corresponding `LoadModule' lines at this location so the +# directives contained in it are actually available _before_ they are used. +# Statically compiled modules (those listed by `httpd -l') do not need +# to be loaded here. +# +# Example: +# LoadModule foo_module modules/mod_foo.so +# +LoadModule authn_file_module modules/mod_authn_file.so +LoadModule authn_dbm_module modules/mod_authn_dbm.so +LoadModule authn_anon_module modules/mod_authn_anon.so +LoadModule authn_dbd_module modules/mod_authn_dbd.so +LoadModule authn_default_module modules/mod_authn_default.so +LoadModule authn_alias_module modules/mod_authn_alias.so +LoadModule authz_host_module modules/mod_authz_host.so +LoadModule authz_groupfile_module modules/mod_authz_groupfile.so +LoadModule authz_user_module modules/mod_authz_user.so +LoadModule authz_dbm_module modules/mod_authz_dbm.so +LoadModule authz_owner_module modules/mod_authz_owner.so +LoadModule authnz_ldap_module modules/mod_authnz_ldap.so +LoadModule authz_default_module modules/mod_authz_default.so +LoadModule auth_basic_module modules/mod_auth_basic.so +LoadModule auth_digest_module modules/mod_auth_digest.so +LoadModule file_cache_module modules/mod_file_cache.so +LoadModule cache_module modules/mod_cache.so +LoadModule disk_cache_module modules/mod_disk_cache.so +LoadModule mem_cache_module modules/mod_mem_cache.so +LoadModule dbd_module modules/mod_dbd.so +LoadModule dumpio_module modules/mod_dumpio.so +LoadModule reqtimeout_module modules/mod_reqtimeout.so +LoadModule ext_filter_module modules/mod_ext_filter.so +LoadModule include_module modules/mod_include.so +LoadModule filter_module modules/mod_filter.so +LoadModule substitute_module modules/mod_substitute.so +LoadModule charset_lite_module modules/mod_charset_lite.so +LoadModule deflate_module modules/mod_deflate.so +LoadModule ldap_module modules/mod_ldap.so +LoadModule log_config_module modules/mod_log_config.so +LoadModule log_forensic_module modules/mod_log_forensic.so +LoadModule logio_module modules/mod_logio.so +LoadModule env_module modules/mod_env.so +LoadModule mime_magic_module modules/mod_mime_magic.so +LoadModule cern_meta_module modules/mod_cern_meta.so +LoadModule expires_module modules/mod_expires.so +LoadModule headers_module modules/mod_headers.so +LoadModule ident_module modules/mod_ident.so +LoadModule usertrack_module modules/mod_usertrack.so +LoadModule unique_id_module modules/mod_unique_id.so +LoadModule setenvif_module modules/mod_setenvif.so +LoadModule version_module modules/mod_version.so +LoadModule proxy_module modules/mod_proxy.so +LoadModule proxy_connect_module modules/mod_proxy_connect.so +LoadModule proxy_ftp_module modules/mod_proxy_ftp.so +LoadModule proxy_http_module modules/mod_proxy_http.so +LoadModule proxy_scgi_module modules/mod_proxy_scgi.so +LoadModule proxy_ajp_module modules/mod_proxy_ajp.so +LoadModule proxy_balancer_module modules/mod_proxy_balancer.so +LoadModule ssl_module modules/mod_ssl.so +LoadModule mime_module modules/mod_mime.so +LoadModule dav_module modules/mod_dav.so +LoadModule status_module modules/mod_status.so +LoadModule autoindex_module modules/mod_autoindex.so +LoadModule asis_module modules/mod_asis.so +LoadModule info_module modules/mod_info.so +LoadModule cgi_module modules/mod_cgi.so +LoadModule dav_fs_module modules/mod_dav_fs.so +LoadModule dav_lock_module modules/mod_dav_lock.so +LoadModule vhost_alias_module modules/mod_vhost_alias.so +LoadModule negotiation_module modules/mod_negotiation.so +LoadModule dir_module modules/mod_dir.so +LoadModule imagemap_module modules/mod_imagemap.so +LoadModule actions_module modules/mod_actions.so +LoadModule speling_module modules/mod_speling.so +LoadModule userdir_module modules/mod_userdir.so +LoadModule alias_module modules/mod_alias.so +LoadModule rewrite_module modules/mod_rewrite.so + + + +# +# If you wish httpd to run as a different user or group, you must run +# httpd as root initially and it will switch. +# +# User/Group: The name (or #number) of the user/group to run httpd as. +# It is usually good practice to create a dedicated user and group for +# running httpd, as with most system services. +# +User daemon +Group daemon + + + + +# 'Main' server configuration +# +# The directives in this section set up the values used by the 'main' +# server, which responds to any requests that aren't handled by a +# definition. These values also provide defaults for +# any containers you may define later in the file. +# +# All of these directives may appear inside containers, +# in which case these default settings will be overridden for the +# virtual host being defined. +# + +# +# ServerAdmin: Your address, where problems with the server should be +# e-mailed. This address appears on some server-generated pages, such +# as error documents. e.g. admin@your-domain.com +# +ServerAdmin you@example.com + +# +# ServerName gives the name and port that the server uses to identify itself. +# This can often be determined automatically, but we recommend you specify +# it explicitly to prevent problems during startup. +# +# If your host doesn't have a registered DNS name, enter its IP address here. +# +#ServerName www.example.com:80 + +# +# DocumentRoot: The directory out of which you will serve your +# documents. By default, all requests are taken from this directory, but +# symbolic links and aliases may be used to point to other locations. +# +DocumentRoot "/usr/local/apache2/htdocs" + +# +# Each directory to which Apache has access can be configured with respect +# to which services and features are allowed and/or disabled in that +# directory (and its subdirectories). +# +# First, we configure the "default" to be a very restrictive set of +# features. +# + + Options FollowSymLinks + AllowOverride None + Order deny,allow + Deny from all + + +# +# Note that from this point forward you must specifically allow +# particular features to be enabled - so if something's not working as +# you might expect, make sure that you have specifically enabled it +# below. +# + +# +# This should be changed to whatever you set DocumentRoot to. +# + + # + # Possible values for the Options directive are "None", "All", + # or any combination of: + # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews + # + # Note that "MultiViews" must be named *explicitly* --- "Options All" + # doesn't give it to you. + # + # The Options directive is both complicated and important. Please see + # http://httpd.apache.org/docs/2.2/mod/core.html#options + # for more information. + # + Options Indexes FollowSymLinks + + # + # AllowOverride controls what directives may be placed in .htaccess files. + # It can be "All", "None", or any combination of the keywords: + # Options FileInfo AuthConfig Limit + # + AllowOverride None + + # + # Controls who can get stuff from this server. + # + Order allow,deny + Allow from all + + + +# +# DirectoryIndex: sets the file that Apache will serve if a directory +# is requested. +# + + DirectoryIndex index.html + + +# +# The following lines prevent .htaccess and .htpasswd files from being +# viewed by Web clients. +# + + Order allow,deny + Deny from all + Satisfy All + + +# +# ErrorLog: The location of the error log file. +# If you do not specify an ErrorLog directive within a +# container, error messages relating to that virtual host will be +# logged here. If you *do* define an error logfile for a +# container, that host's errors will be logged there and not here. +# +ErrorLog /proc/self/fd/2 + +# +# LogLevel: Control the number of messages logged to the error_log. +# Possible values include: debug, info, notice, warn, error, crit, +# alert, emerg. +# +LogLevel warn + + + # + # The following directives define some format nicknames for use with + # a CustomLog directive (see below). + # + LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined + LogFormat "%h %l %u %t \"%r\" %>s %b" common + + + # You need to enable mod_logio.c to use %I and %O + LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio + + + # + # The location and format of the access logfile (Common Logfile Format). + # If you do not define any access logfiles within a + # container, they will be logged here. Contrariwise, if you *do* + # define per- access logfiles, transactions will be + # logged therein and *not* in this file. + # + CustomLog /proc/self/fd/1 common + + # + # If you prefer a logfile with access, agent, and referer information + # (Combined Logfile Format) you can use the following directive. + # + #CustomLog "logs/access_log" combined + + + + # + # Redirect: Allows you to tell clients about documents that used to + # exist in your server's namespace, but do not anymore. The client + # will make a new request for the document at its new location. + # Example: + # Redirect permanent /foo http://www.example.com/bar + + # + # Alias: Maps web paths into filesystem paths and is used to + # access content that does not live under the DocumentRoot. + # Example: + # Alias /webpath /full/filesystem/path + # + # If you include a trailing / on /webpath then the server will + # require it to be present in the URL. You will also likely + # need to provide a section to allow access to + # the filesystem path. + + # + # ScriptAlias: This controls which directories contain server scripts. + # ScriptAliases are essentially the same as Aliases, except that + # documents in the target directory are treated as applications and + # run by the server when requested rather than as documents sent to the + # client. The same rules about trailing "/" apply to ScriptAlias + # directives as to Alias. + # + ScriptAlias /cgi-bin/ "/usr/local/apache2/cgi-bin/" + + + + + # + # ScriptSock: On threaded servers, designate the path to the UNIX + # socket used to communicate with the CGI daemon of mod_cgid. + # + #Scriptsock logs/cgisock + + +# +# "/usr/local/apache2/cgi-bin" should be changed to whatever your ScriptAliased +# CGI directory exists, if you have that configured. +# + + AllowOverride None + Options None + Order allow,deny + Allow from all + + +# +# DefaultType: the default MIME type the server will use for a document +# if it cannot otherwise determine one, such as from filename extensions. +# If your server contains mostly text or HTML documents, "text/plain" is +# a good value. If most of your content is binary, such as applications +# or images, you may want to use "application/octet-stream" instead to +# keep browsers from trying to display binary files as though they are +# text. +# +DefaultType text/plain + + + # + # Avoid passing HTTP_PROXY environment to CGI's on this or any proxied + # backend servers which have lingering "httpoxy" defects. + # 'Proxy' request header is undefined by the IETF, not listed by IANA + # + RequestHeader unset Proxy early + + + + # + # TypesConfig points to the file containing the list of mappings from + # filename extension to MIME-type. + # + TypesConfig conf/mime.types + + # + # AddType allows you to add to or override the MIME configuration + # file specified in TypesConfig for specific file types. + # + #AddType application/x-gzip .tgz + # + # AddEncoding allows you to have certain browsers uncompress + # information on the fly. Note: Not all browsers support this. + # + #AddEncoding x-compress .Z + #AddEncoding x-gzip .gz .tgz + # + # If the AddEncoding directives above are commented-out, then you + # probably should define those extensions to indicate media types: + # + AddType application/x-compress .Z + AddType application/x-gzip .gz .tgz + + # + # AddHandler allows you to map certain file extensions to "handlers": + # actions unrelated to filetype. These can be either built into the server + # or added with the Action directive (see below) + # + # To use CGI scripts outside of ScriptAliased directories: + # (You will also need to add "ExecCGI" to the "Options" directive.) + # + #AddHandler cgi-script .cgi + + # For type maps (negotiated resources): + #AddHandler type-map var + + # + # Filters allow you to process content before it is sent to the client. + # + # To parse .shtml files for server-side includes (SSI): + # (You will also need to add "Includes" to the "Options" directive.) + # + #AddType text/html .shtml + #AddOutputFilter INCLUDES .shtml + + +# +# The mod_mime_magic module allows the server to use various hints from the +# contents of the file itself to determine its type. The MIMEMagicFile +# directive tells the module where the hint definitions are located. +# +#MIMEMagicFile conf/magic + +# +# Customizable error responses come in three flavors: +# 1) plain text 2) local redirects 3) external redirects +# +# Some examples: +#ErrorDocument 500 "The server made a boo boo." +#ErrorDocument 404 /missing.html +#ErrorDocument 404 "/cgi-bin/missing_handler.pl" +#ErrorDocument 402 http://www.example.com/subscription_info.html +# + +# +# MaxRanges: Maximum number of Ranges in a request before +# returning the entire resource, or one of the special +# values 'default', 'none' or 'unlimited'. +# Default setting is to accept 200 Ranges. +#MaxRanges unlimited + +# +# EnableMMAP and EnableSendfile: On systems that support it, +# memory-mapping or the sendfile syscall is used to deliver +# files. This usually improves server performance, but must +# be turned off when serving from networked-mounted +# filesystems or if support for these functions is otherwise +# broken on your system. +# +#EnableMMAP off +#EnableSendfile off + +# Supplemental configuration +# +# The configuration files in the conf/extra/ directory can be +# included to add extra features or to modify the default configuration of +# the server, or you may simply copy their contents here and change as +# necessary. + +# Server-pool management (MPM specific) +#Include conf/extra/httpd-mpm.conf + +# Multi-language error messages +#Include conf/extra/httpd-multilang-errordoc.conf + +# Fancy directory listings +#Include conf/extra/httpd-autoindex.conf + +# Language settings +#Include conf/extra/httpd-languages.conf + +# User home directories +#Include conf/extra/httpd-userdir.conf + +# Real-time info on requests and configuration +#Include conf/extra/httpd-info.conf + +# Virtual hosts +#Include conf/extra/httpd-vhosts.conf + +# Local access to the Apache HTTP Server Manual +#Include conf/extra/httpd-manual.conf + +# Distributed authoring and versioning (WebDAV) +#Include conf/extra/httpd-dav.conf + +# Various default settings +#Include conf/extra/httpd-default.conf + +# Secure (SSL/TLS) connections +#Include conf/extra/httpd-ssl.conf +# +# Note: The following must must be present to support +# starting without SSL on platforms with no /dev/random equivalent +# but a statically compiled-in mod_ssl. +# + +SSLRandomSeed startup builtin +SSLRandomSeed connect builtin + + +Include conf/kaas/router.conf diff --git a/setup/projects/katrin/files/etc/apache2-kaas-docker/kaas/router.conf b/setup/projects/katrin/files/etc/apache2-kaas-docker/kaas/router.conf new file mode 100644 index 0000000..4afa6dd --- /dev/null +++ b/setup/projects/katrin/files/etc/apache2-kaas-docker/kaas/router.conf @@ -0,0 +1,2 @@ +ProxyPass /adei http://katrin.kit.edu/adei-katrin +ProxyPass /katrin-ng http://katrin.kit.edu/katrin-ng diff --git a/setup/projects/katrin/files/etc/apache2-kaas-docker/magic b/setup/projects/katrin/files/etc/apache2-kaas-docker/magic new file mode 100644 index 0000000..0de7336 --- /dev/null +++ b/setup/projects/katrin/files/etc/apache2-kaas-docker/magic @@ -0,0 +1,382 @@ +# Magic data for mod_mime_magic Apache module (originally for file(1) command) +# The module is described in /manual/mod/mod_mime_magic.html +# +# The format is 4-5 columns: +# Column #1: byte number to begin checking from, ">" indicates continuation +# Column #2: type of data to match +# Column #3: contents of data to match +# Column #4: MIME type of result +# Column #5: MIME encoding of result (optional) + +#------------------------------------------------------------------------------ +# Localstuff: file(1) magic for locally observed files +# Add any locally observed files here. + +#------------------------------------------------------------------------------ +# end local stuff +#------------------------------------------------------------------------------ + +#------------------------------------------------------------------------------ +# Java + +0 short 0xcafe +>2 short 0xbabe application/java + +#------------------------------------------------------------------------------ +# audio: file(1) magic for sound formats +# +# from Jan Nicolai Langfeldt , +# + +# Sun/NeXT audio data +0 string .snd +>12 belong 1 audio/basic +>12 belong 2 audio/basic +>12 belong 3 audio/basic +>12 belong 4 audio/basic +>12 belong 5 audio/basic +>12 belong 6 audio/basic +>12 belong 7 audio/basic + +>12 belong 23 audio/x-adpcm + +# DEC systems (e.g. DECstation 5000) use a variant of the Sun/NeXT format +# that uses little-endian encoding and has a different magic number +# (0x0064732E in little-endian encoding). +0 lelong 0x0064732E +>12 lelong 1 audio/x-dec-basic +>12 lelong 2 audio/x-dec-basic +>12 lelong 3 audio/x-dec-basic +>12 lelong 4 audio/x-dec-basic +>12 lelong 5 audio/x-dec-basic +>12 lelong 6 audio/x-dec-basic +>12 lelong 7 audio/x-dec-basic +# compressed (G.721 ADPCM) +>12 lelong 23 audio/x-dec-adpcm + +# Bytes 0-3 of AIFF, AIFF-C, & 8SVX audio files are "FORM" +# AIFF audio data +8 string AIFF audio/x-aiff +# AIFF-C audio data +8 string AIFC audio/x-aiff +# IFF/8SVX audio data +8 string 8SVX audio/x-aiff + +# Creative Labs AUDIO stuff +# Standard MIDI data +0 string MThd audio/unknown +#>9 byte >0 (format %d) +#>11 byte >1 using %d channels +# Creative Music (CMF) data +0 string CTMF audio/unknown +# SoundBlaster instrument data +0 string SBI audio/unknown +# Creative Labs voice data +0 string Creative\ Voice\ File audio/unknown +## is this next line right? it came this way... +#>19 byte 0x1A +#>23 byte >0 - version %d +#>22 byte >0 \b.%d + +# [GRR 950115: is this also Creative Labs? Guessing that first line +# should be string instead of unknown-endian long...] +#0 long 0x4e54524b MultiTrack sound data +#0 string NTRK MultiTrack sound data +#>4 long x - version %ld + +# Microsoft WAVE format (*.wav) +# [GRR 950115: probably all of the shorts and longs should be leshort/lelong] +# Microsoft RIFF +0 string RIFF audio/unknown +# - WAVE format +>8 string WAVE audio/x-wav +# MPEG audio. +0 beshort&0xfff0 0xfff0 audio/mpeg +# C64 SID Music files, from Linus Walleij +0 string PSID audio/prs.sid + +#------------------------------------------------------------------------------ +# c-lang: file(1) magic for C programs or various scripts +# + +# XPM icons (Greg Roelofs, newt@uchicago.edu) +# ideally should go into "images", but entries below would tag XPM as C source +0 string /*\ XPM image/x-xbm 7bit + +# this first will upset you if you're a PL/1 shop... (are there any left?) +# in which case rm it; ascmagic will catch real C programs +# C or REXX program text +0 string /* text/plain +# C++ program text +0 string // text/plain + +#------------------------------------------------------------------------------ +# compress: file(1) magic for pure-compression formats (no archives) +# +# compress, gzip, pack, compact, huf, squeeze, crunch, freeze, yabba, whap, etc. +# +# Formats for various forms of compressed data +# Formats for "compress" proper have been moved into "compress.c", +# because it tries to uncompress it to figure out what's inside. + +# standard unix compress +0 string \037\235 application/octet-stream x-compress + +# gzip (GNU zip, not to be confused with [Info-ZIP/PKWARE] zip archiver) +0 string \037\213 application/octet-stream x-gzip + +# According to gzip.h, this is the correct byte order for packed data. +0 string \037\036 application/octet-stream +# +# This magic number is byte-order-independent. +# +0 short 017437 application/octet-stream + +# XXX - why *two* entries for "compacted data", one of which is +# byte-order independent, and one of which is byte-order dependent? +# +# compacted data +0 short 0x1fff application/octet-stream +0 string \377\037 application/octet-stream +# huf output +0 short 0145405 application/octet-stream + +# Squeeze and Crunch... +# These numbers were gleaned from the Unix versions of the programs to +# handle these formats. Note that I can only uncrunch, not crunch, and +# I didn't have a crunched file handy, so the crunch number is untested. +# Keith Waclena +#0 leshort 0x76FF squeezed data (CP/M, DOS) +#0 leshort 0x76FE crunched data (CP/M, DOS) + +# Freeze +#0 string \037\237 Frozen file 2.1 +#0 string \037\236 Frozen file 1.0 (or gzip 0.5) + +# lzh? +#0 string \037\240 LZH compressed data + +#------------------------------------------------------------------------------ +# frame: file(1) magic for FrameMaker files +# +# This stuff came on a FrameMaker demo tape, most of which is +# copyright, but this file is "published" as witness the following: +# +0 string \ +# and Anna Shergold +# +0 string \ +0 string \14 byte 12 (OS/2 1.x format) +#>14 byte 64 (OS/2 2.x format) +#>14 byte 40 (Windows 3.x format) +#0 string IC icon +#0 string PI pointer +#0 string CI color icon +#0 string CP color pointer +#0 string BA bitmap array + + +#------------------------------------------------------------------------------ +# lisp: file(1) magic for lisp programs +# +# various lisp types, from Daniel Quinlan (quinlan@yggdrasil.com) +0 string ;; text/plain 8bit +# Emacs 18 - this is always correct, but not very magical. +0 string \012( application/x-elc +# Emacs 19 +0 string ;ELC\023\000\000\000 application/x-elc + +#------------------------------------------------------------------------------ +# mail.news: file(1) magic for mail and news +# +# There are tests to ascmagic.c to cope with mail and news. +0 string Relay-Version: message/rfc822 7bit +0 string #!\ rnews message/rfc822 7bit +0 string N#!\ rnews message/rfc822 7bit +0 string Forward\ to message/rfc822 7bit +0 string Pipe\ to message/rfc822 7bit +0 string Return-Path: message/rfc822 7bit +0 string Path: message/news 8bit +0 string Xref: message/news 8bit +0 string From: message/rfc822 7bit +0 string Article message/news 8bit +#------------------------------------------------------------------------------ +# msword: file(1) magic for MS Word files +# +# Contributor claims: +# Reversed-engineered MS Word magic numbers +# + +0 string \376\067\0\043 application/msword +0 string \333\245-\0\0\0 application/msword + +# disable this one because it applies also to other +# Office/OLE documents for which msword is not correct. See PR#2608. +#0 string \320\317\021\340\241\261 application/msword + + + +#------------------------------------------------------------------------------ +# printer: file(1) magic for printer-formatted files +# + +# PostScript +0 string %! application/postscript +0 string \004%! application/postscript + +# Acrobat +# (due to clamen@cs.cmu.edu) +0 string %PDF- application/pdf + +#------------------------------------------------------------------------------ +# sc: file(1) magic for "sc" spreadsheet +# +38 string Spreadsheet application/x-sc + +#------------------------------------------------------------------------------ +# tex: file(1) magic for TeX files +# +# XXX - needs byte-endian stuff (big-endian and little-endian DVI?) +# +# From + +# Although we may know the offset of certain text fields in TeX DVI +# and font files, we can't use them reliably because they are not +# zero terminated. [but we do anyway, christos] +0 string \367\002 application/x-dvi +#0 string \367\203 TeX generic font data +#0 string \367\131 TeX packed font data +#0 string \367\312 TeX virtual font data +#0 string This\ is\ TeX, TeX transcript text +#0 string This\ is\ METAFONT, METAFONT transcript text + +# There is no way to detect TeX Font Metric (*.tfm) files without +# breaking them apart and reading the data. The following patterns +# match most *.tfm files generated by METAFONT or afm2tfm. +#2 string \000\021 TeX font metric data +#2 string \000\022 TeX font metric data +#>34 string >\0 (%s) + +# Texinfo and GNU Info, from Daniel Quinlan (quinlan@yggdrasil.com) +#0 string \\input\ texinfo Texinfo source text +#0 string This\ is\ Info\ file GNU Info text + +# correct TeX magic for Linux (and maybe more) +# from Peter Tobias (tobias@server.et-inf.fho-emden.de) +# +0 leshort 0x02f7 application/x-dvi + +# RTF - Rich Text Format +0 string {\\rtf application/rtf + +#------------------------------------------------------------------------------ +# animation: file(1) magic for animation/movie formats +# +# animation formats, originally from vax@ccwf.cc.utexas.edu (VaX#n8) +# MPEG file +0 string \000\000\001\263 video/mpeg +# +# The contributor claims: +# I couldn't find a real magic number for these, however, this +# -appears- to work. Note that it might catch other files, too, +# so BE CAREFUL! +# +# Note that title and author appear in the two 20-byte chunks +# at decimal offsets 2 and 22, respectively, but they are XOR'ed with +# 255 (hex FF)! DL format SUCKS BIG ROCKS. +# +# DL file version 1 , medium format (160x100, 4 images/screen) +0 byte 1 video/unknown +0 byte 2 video/unknown +# Quicktime video, from Linus Walleij +# from Apple quicktime file format documentation. +4 string moov video/quicktime +4 string mdat video/quicktime + diff --git a/setup/projects/katrin/files/etc/apache2-kaas-docker/mime.types b/setup/projects/katrin/files/etc/apache2-kaas-docker/mime.types new file mode 100644 index 0000000..5175242 --- /dev/null +++ b/setup/projects/katrin/files/etc/apache2-kaas-docker/mime.types @@ -0,0 +1,1588 @@ +# This file maps Internet media types to unique file extension(s). +# Although created for httpd, this file is used by many software systems +# and has been placed in the public domain for unlimited redisribution. +# +# The table below contains both registered and (common) unregistered types. +# A type that has no unique extension can be ignored -- they are listed +# here to guide configurations toward known types and to make it easier to +# identify "new" types. File extensions are also commonly used to indicate +# content languages and encodings, so choose them carefully. +# +# Internet media types should be registered as described in RFC 4288. +# The registry is at . +# +# MIME type (lowercased) Extensions +# ============================================ ========== +# application/1d-interleaved-parityfec +# application/3gpp-ims+xml +# application/activemessage +application/andrew-inset ez +# application/applefile +application/applixware aw +application/atom+xml atom +application/atomcat+xml atomcat +# application/atomicmail +application/atomsvc+xml atomsvc +# application/auth-policy+xml +# application/batch-smtp +# application/beep+xml +# application/calendar+xml +# application/cals-1840 +# application/ccmp+xml +application/ccxml+xml ccxml +application/cdmi-capability cdmia +application/cdmi-container cdmic +application/cdmi-domain cdmid +application/cdmi-object cdmio +application/cdmi-queue cdmiq +# application/cea-2018+xml +# application/cellml+xml +# application/cfw +# application/cnrp+xml +# application/commonground +# application/conference-info+xml +# application/cpl+xml +# application/csta+xml +# application/cstadata+xml +application/cu-seeme cu +# application/cybercash +application/davmount+xml davmount +# application/dca-rft +# application/dec-dx +# application/dialog-info+xml +# application/dicom +# application/dns +application/docbook+xml dbk +# application/dskpp+xml +application/dssc+der dssc +application/dssc+xml xdssc +# application/dvcs +application/ecmascript ecma +# application/edi-consent +# application/edi-x12 +# application/edifact +application/emma+xml emma +# application/epp+xml +application/epub+zip epub +# application/eshop +# application/example +application/exi exi +# application/fastinfoset +# application/fastsoap +# application/fits +application/font-tdpfr pfr +# application/framework-attributes+xml +application/gml+xml gml +application/gpx+xml gpx +application/gxf gxf +# application/h224 +# application/held+xml +# application/http +application/hyperstudio stk +# application/ibe-key-request+xml +# application/ibe-pkg-reply+xml +# application/ibe-pp-data +# application/iges +# application/im-iscomposing+xml +# application/index +# application/index.cmd +# application/index.obj +# application/index.response +# application/index.vnd +application/inkml+xml ink inkml +# application/iotp +application/ipfix ipfix +# application/ipp +# application/isup +application/java-archive jar +application/java-serialized-object ser +application/java-vm class +application/javascript js +application/json json +application/jsonml+json jsonml +# application/kpml-request+xml +# application/kpml-response+xml +application/lost+xml lostxml +application/mac-binhex40 hqx +application/mac-compactpro cpt +# application/macwriteii +application/mads+xml mads +application/marc mrc +application/marcxml+xml mrcx +application/mathematica ma nb mb +# application/mathml-content+xml +# application/mathml-presentation+xml +application/mathml+xml mathml +# application/mbms-associated-procedure-description+xml +# application/mbms-deregister+xml +# application/mbms-envelope+xml +# application/mbms-msk+xml +# application/mbms-msk-response+xml +# application/mbms-protection-description+xml +# application/mbms-reception-report+xml +# application/mbms-register+xml +# application/mbms-register-response+xml +# application/mbms-user-service-description+xml +application/mbox mbox +# application/media_control+xml +application/mediaservercontrol+xml mscml +application/metalink+xml metalink +application/metalink4+xml meta4 +application/mets+xml mets +# application/mikey +application/mods+xml mods +# application/moss-keys +# application/moss-signature +# application/mosskey-data +# application/mosskey-request +application/mp21 m21 mp21 +application/mp4 mp4s +# application/mpeg4-generic +# application/mpeg4-iod +# application/mpeg4-iod-xmt +# application/msc-ivr+xml +# application/msc-mixer+xml +application/msword doc dot +application/mxf mxf +# application/nasdata +# application/news-checkgroups +# application/news-groupinfo +# application/news-transmission +# application/nss +# application/ocsp-request +# application/ocsp-response +application/octet-stream bin dms lrf mar so dist distz pkg bpk dump elc deploy +application/oda oda +application/oebps-package+xml opf +application/ogg ogx +application/omdoc+xml omdoc +application/onenote onetoc onetoc2 onetmp onepkg +application/oxps oxps +# application/parityfec +application/patch-ops-error+xml xer +application/pdf pdf +application/pgp-encrypted pgp +# application/pgp-keys +application/pgp-signature asc sig +application/pics-rules prf +# application/pidf+xml +# application/pidf-diff+xml +application/pkcs10 p10 +application/pkcs7-mime p7m p7c +application/pkcs7-signature p7s +application/pkcs8 p8 +application/pkix-attr-cert ac +application/pkix-cert cer +application/pkix-crl crl +application/pkix-pkipath pkipath +application/pkixcmp pki +application/pls+xml pls +# application/poc-settings+xml +application/postscript ai eps ps +# application/prs.alvestrand.titrax-sheet +application/prs.cww cww +# application/prs.nprend +# application/prs.plucker +# application/prs.rdf-xml-crypt +# application/prs.xsf+xml +application/pskc+xml pskcxml +# application/qsig +application/rdf+xml rdf +application/reginfo+xml rif +application/relax-ng-compact-syntax rnc +# application/remote-printing +application/resource-lists+xml rl +application/resource-lists-diff+xml rld +# application/riscos +# application/rlmi+xml +application/rls-services+xml rs +application/rpki-ghostbusters gbr +application/rpki-manifest mft +application/rpki-roa roa +# application/rpki-updown +application/rsd+xml rsd +application/rss+xml rss +application/rtf rtf +# application/rtx +# application/samlassertion+xml +# application/samlmetadata+xml +application/sbml+xml sbml +application/scvp-cv-request scq +application/scvp-cv-response scs +application/scvp-vp-request spq +application/scvp-vp-response spp +application/sdp sdp +# application/set-payment +application/set-payment-initiation setpay +# application/set-registration +application/set-registration-initiation setreg +# application/sgml +# application/sgml-open-catalog +application/shf+xml shf +# application/sieve +# application/simple-filter+xml +# application/simple-message-summary +# application/simplesymbolcontainer +# application/slate +# application/smil +application/smil+xml smi smil +# application/soap+fastinfoset +# application/soap+xml +application/sparql-query rq +application/sparql-results+xml srx +# application/spirits-event+xml +application/srgs gram +application/srgs+xml grxml +application/sru+xml sru +application/ssdl+xml ssdl +application/ssml+xml ssml +# application/tamp-apex-update +# application/tamp-apex-update-confirm +# application/tamp-community-update +# application/tamp-community-update-confirm +# application/tamp-error +# application/tamp-sequence-adjust +# application/tamp-sequence-adjust-confirm +# application/tamp-status-query +# application/tamp-status-response +# application/tamp-update +# application/tamp-update-confirm +application/tei+xml tei teicorpus +application/thraud+xml tfi +# application/timestamp-query +# application/timestamp-reply +application/timestamped-data tsd +# application/tve-trigger +# application/ulpfec +# application/vcard+xml +# application/vemmi +# application/vividence.scriptfile +# application/vnd.3gpp.bsf+xml +application/vnd.3gpp.pic-bw-large plb +application/vnd.3gpp.pic-bw-small psb +application/vnd.3gpp.pic-bw-var pvb +# application/vnd.3gpp.sms +# application/vnd.3gpp2.bcmcsinfo+xml +# application/vnd.3gpp2.sms +application/vnd.3gpp2.tcap tcap +application/vnd.3m.post-it-notes pwn +application/vnd.accpac.simply.aso aso +application/vnd.accpac.simply.imp imp +application/vnd.acucobol acu +application/vnd.acucorp atc acutc +application/vnd.adobe.air-application-installer-package+zip air +application/vnd.adobe.formscentral.fcdt fcdt +application/vnd.adobe.fxp fxp fxpl +# application/vnd.adobe.partial-upload +application/vnd.adobe.xdp+xml xdp +application/vnd.adobe.xfdf xfdf +# application/vnd.aether.imp +# application/vnd.ah-barcode +application/vnd.ahead.space ahead +application/vnd.airzip.filesecure.azf azf +application/vnd.airzip.filesecure.azs azs +application/vnd.amazon.ebook azw +application/vnd.americandynamics.acc acc +application/vnd.amiga.ami ami +# application/vnd.amundsen.maze+xml +application/vnd.android.package-archive apk +application/vnd.anser-web-certificate-issue-initiation cii +application/vnd.anser-web-funds-transfer-initiation fti +application/vnd.antix.game-component atx +application/vnd.apple.installer+xml mpkg +application/vnd.apple.mpegurl m3u8 +# application/vnd.arastra.swi +application/vnd.aristanetworks.swi swi +application/vnd.astraea-software.iota iota +application/vnd.audiograph aep +# application/vnd.autopackage +# application/vnd.avistar+xml +application/vnd.blueice.multipass mpm +# application/vnd.bluetooth.ep.oob +application/vnd.bmi bmi +application/vnd.businessobjects rep +# application/vnd.cab-jscript +# application/vnd.canon-cpdl +# application/vnd.canon-lips +# application/vnd.cendio.thinlinc.clientconf +application/vnd.chemdraw+xml cdxml +application/vnd.chipnuts.karaoke-mmd mmd +application/vnd.cinderella cdy +# application/vnd.cirpack.isdn-ext +application/vnd.claymore cla +application/vnd.cloanto.rp9 rp9 +application/vnd.clonk.c4group c4g c4d c4f c4p c4u +application/vnd.cluetrust.cartomobile-config c11amc +application/vnd.cluetrust.cartomobile-config-pkg c11amz +# application/vnd.collection+json +# application/vnd.commerce-battelle +application/vnd.commonspace csp +application/vnd.contact.cmsg cdbcmsg +application/vnd.cosmocaller cmc +application/vnd.crick.clicker clkx +application/vnd.crick.clicker.keyboard clkk +application/vnd.crick.clicker.palette clkp +application/vnd.crick.clicker.template clkt +application/vnd.crick.clicker.wordbank clkw +application/vnd.criticaltools.wbs+xml wbs +application/vnd.ctc-posml pml +# application/vnd.ctct.ws+xml +# application/vnd.cups-pdf +# application/vnd.cups-postscript +application/vnd.cups-ppd ppd +# application/vnd.cups-raster +# application/vnd.cups-raw +# application/vnd.curl +application/vnd.curl.car car +application/vnd.curl.pcurl pcurl +# application/vnd.cybank +application/vnd.dart dart +application/vnd.data-vision.rdz rdz +application/vnd.dece.data uvf uvvf uvd uvvd +application/vnd.dece.ttml+xml uvt uvvt +application/vnd.dece.unspecified uvx uvvx +application/vnd.dece.zip uvz uvvz +application/vnd.denovo.fcselayout-link fe_launch +# application/vnd.dir-bi.plate-dl-nosuffix +application/vnd.dna dna +application/vnd.dolby.mlp mlp +# application/vnd.dolby.mobile.1 +# application/vnd.dolby.mobile.2 +application/vnd.dpgraph dpg +application/vnd.dreamfactory dfac +application/vnd.ds-keypoint kpxx +application/vnd.dvb.ait ait +# application/vnd.dvb.dvbj +# application/vnd.dvb.esgcontainer +# application/vnd.dvb.ipdcdftnotifaccess +# application/vnd.dvb.ipdcesgaccess +# application/vnd.dvb.ipdcesgaccess2 +# application/vnd.dvb.ipdcesgpdd +# application/vnd.dvb.ipdcroaming +# application/vnd.dvb.iptv.alfec-base +# application/vnd.dvb.iptv.alfec-enhancement +# application/vnd.dvb.notif-aggregate-root+xml +# application/vnd.dvb.notif-container+xml +# application/vnd.dvb.notif-generic+xml +# application/vnd.dvb.notif-ia-msglist+xml +# application/vnd.dvb.notif-ia-registration-request+xml +# application/vnd.dvb.notif-ia-registration-response+xml +# application/vnd.dvb.notif-init+xml +# application/vnd.dvb.pfr +application/vnd.dvb.service svc +# application/vnd.dxr +application/vnd.dynageo geo +# application/vnd.easykaraoke.cdgdownload +# application/vnd.ecdis-update +application/vnd.ecowin.chart mag +# application/vnd.ecowin.filerequest +# application/vnd.ecowin.fileupdate +# application/vnd.ecowin.series +# application/vnd.ecowin.seriesrequest +# application/vnd.ecowin.seriesupdate +# application/vnd.emclient.accessrequest+xml +application/vnd.enliven nml +# application/vnd.eprints.data+xml +application/vnd.epson.esf esf +application/vnd.epson.msf msf +application/vnd.epson.quickanime qam +application/vnd.epson.salt slt +application/vnd.epson.ssf ssf +# application/vnd.ericsson.quickcall +application/vnd.eszigno3+xml es3 et3 +# application/vnd.etsi.aoc+xml +# application/vnd.etsi.cug+xml +# application/vnd.etsi.iptvcommand+xml +# application/vnd.etsi.iptvdiscovery+xml +# application/vnd.etsi.iptvprofile+xml +# application/vnd.etsi.iptvsad-bc+xml +# application/vnd.etsi.iptvsad-cod+xml +# application/vnd.etsi.iptvsad-npvr+xml +# application/vnd.etsi.iptvservice+xml +# application/vnd.etsi.iptvsync+xml +# application/vnd.etsi.iptvueprofile+xml +# application/vnd.etsi.mcid+xml +# application/vnd.etsi.overload-control-policy-dataset+xml +# application/vnd.etsi.sci+xml +# application/vnd.etsi.simservs+xml +# application/vnd.etsi.tsl+xml +# application/vnd.etsi.tsl.der +# application/vnd.eudora.data +application/vnd.ezpix-album ez2 +application/vnd.ezpix-package ez3 +# application/vnd.f-secure.mobile +application/vnd.fdf fdf +application/vnd.fdsn.mseed mseed +application/vnd.fdsn.seed seed dataless +# application/vnd.ffsns +# application/vnd.fints +application/vnd.flographit gph +application/vnd.fluxtime.clip ftc +# application/vnd.font-fontforge-sfd +application/vnd.framemaker fm frame maker book +application/vnd.frogans.fnc fnc +application/vnd.frogans.ltf ltf +application/vnd.fsc.weblaunch fsc +application/vnd.fujitsu.oasys oas +application/vnd.fujitsu.oasys2 oa2 +application/vnd.fujitsu.oasys3 oa3 +application/vnd.fujitsu.oasysgp fg5 +application/vnd.fujitsu.oasysprs bh2 +# application/vnd.fujixerox.art-ex +# application/vnd.fujixerox.art4 +# application/vnd.fujixerox.hbpl +application/vnd.fujixerox.ddd ddd +application/vnd.fujixerox.docuworks xdw +application/vnd.fujixerox.docuworks.binder xbd +# application/vnd.fut-misnet +application/vnd.fuzzysheet fzs +application/vnd.genomatix.tuxedo txd +# application/vnd.geocube+xml +application/vnd.geogebra.file ggb +application/vnd.geogebra.tool ggt +application/vnd.geometry-explorer gex gre +application/vnd.geonext gxt +application/vnd.geoplan g2w +application/vnd.geospace g3w +# application/vnd.globalplatform.card-content-mgt +# application/vnd.globalplatform.card-content-mgt-response +application/vnd.gmx gmx +application/vnd.google-earth.kml+xml kml +application/vnd.google-earth.kmz kmz +application/vnd.grafeq gqf gqs +# application/vnd.gridmp +application/vnd.groove-account gac +application/vnd.groove-help ghf +application/vnd.groove-identity-message gim +application/vnd.groove-injector grv +application/vnd.groove-tool-message gtm +application/vnd.groove-tool-template tpl +application/vnd.groove-vcard vcg +# application/vnd.hal+json +application/vnd.hal+xml hal +application/vnd.handheld-entertainment+xml zmm +application/vnd.hbci hbci +# application/vnd.hcl-bireports +application/vnd.hhe.lesson-player les +application/vnd.hp-hpgl hpgl +application/vnd.hp-hpid hpid +application/vnd.hp-hps hps +application/vnd.hp-jlyt jlt +application/vnd.hp-pcl pcl +application/vnd.hp-pclxl pclxl +# application/vnd.httphone +application/vnd.hydrostatix.sof-data sfd-hdstx +# application/vnd.hzn-3d-crossword +# application/vnd.ibm.afplinedata +# application/vnd.ibm.electronic-media +application/vnd.ibm.minipay mpy +application/vnd.ibm.modcap afp listafp list3820 +application/vnd.ibm.rights-management irm +application/vnd.ibm.secure-container sc +application/vnd.iccprofile icc icm +application/vnd.igloader igl +application/vnd.immervision-ivp ivp +application/vnd.immervision-ivu ivu +# application/vnd.informedcontrol.rms+xml +# application/vnd.informix-visionary +# application/vnd.infotech.project +# application/vnd.infotech.project+xml +# application/vnd.innopath.wamp.notification +application/vnd.insors.igm igm +application/vnd.intercon.formnet xpw xpx +application/vnd.intergeo i2g +# application/vnd.intertrust.digibox +# application/vnd.intertrust.nncp +application/vnd.intu.qbo qbo +application/vnd.intu.qfx qfx +# application/vnd.iptc.g2.conceptitem+xml +# application/vnd.iptc.g2.knowledgeitem+xml +# application/vnd.iptc.g2.newsitem+xml +# application/vnd.iptc.g2.newsmessage+xml +# application/vnd.iptc.g2.packageitem+xml +# application/vnd.iptc.g2.planningitem+xml +application/vnd.ipunplugged.rcprofile rcprofile +application/vnd.irepository.package+xml irp +application/vnd.is-xpr xpr +application/vnd.isac.fcs fcs +application/vnd.jam jam +# application/vnd.japannet-directory-service +# application/vnd.japannet-jpnstore-wakeup +# application/vnd.japannet-payment-wakeup +# application/vnd.japannet-registration +# application/vnd.japannet-registration-wakeup +# application/vnd.japannet-setstore-wakeup +# application/vnd.japannet-verification +# application/vnd.japannet-verification-wakeup +application/vnd.jcp.javame.midlet-rms rms +application/vnd.jisp jisp +application/vnd.joost.joda-archive joda +application/vnd.kahootz ktz ktr +application/vnd.kde.karbon karbon +application/vnd.kde.kchart chrt +application/vnd.kde.kformula kfo +application/vnd.kde.kivio flw +application/vnd.kde.kontour kon +application/vnd.kde.kpresenter kpr kpt +application/vnd.kde.kspread ksp +application/vnd.kde.kword kwd kwt +application/vnd.kenameaapp htke +application/vnd.kidspiration kia +application/vnd.kinar kne knp +application/vnd.koan skp skd skt skm +application/vnd.kodak-descriptor sse +application/vnd.las.las+xml lasxml +# application/vnd.liberty-request+xml +application/vnd.llamagraphics.life-balance.desktop lbd +application/vnd.llamagraphics.life-balance.exchange+xml lbe +application/vnd.lotus-1-2-3 123 +application/vnd.lotus-approach apr +application/vnd.lotus-freelance pre +application/vnd.lotus-notes nsf +application/vnd.lotus-organizer org +application/vnd.lotus-screencam scm +application/vnd.lotus-wordpro lwp +application/vnd.macports.portpkg portpkg +# application/vnd.marlin.drm.actiontoken+xml +# application/vnd.marlin.drm.conftoken+xml +# application/vnd.marlin.drm.license+xml +# application/vnd.marlin.drm.mdcf +application/vnd.mcd mcd +application/vnd.medcalcdata mc1 +application/vnd.mediastation.cdkey cdkey +# application/vnd.meridian-slingshot +application/vnd.mfer mwf +application/vnd.mfmp mfm +application/vnd.micrografx.flo flo +application/vnd.micrografx.igx igx +application/vnd.mif mif +# application/vnd.minisoft-hp3000-save +# application/vnd.mitsubishi.misty-guard.trustweb +application/vnd.mobius.daf daf +application/vnd.mobius.dis dis +application/vnd.mobius.mbk mbk +application/vnd.mobius.mqy mqy +application/vnd.mobius.msl msl +application/vnd.mobius.plc plc +application/vnd.mobius.txf txf +application/vnd.mophun.application mpn +application/vnd.mophun.certificate mpc +# application/vnd.motorola.flexsuite +# application/vnd.motorola.flexsuite.adsi +# application/vnd.motorola.flexsuite.fis +# application/vnd.motorola.flexsuite.gotap +# application/vnd.motorola.flexsuite.kmr +# application/vnd.motorola.flexsuite.ttc +# application/vnd.motorola.flexsuite.wem +# application/vnd.motorola.iprm +application/vnd.mozilla.xul+xml xul +application/vnd.ms-artgalry cil +# application/vnd.ms-asf +application/vnd.ms-cab-compressed cab +# application/vnd.ms-color.iccprofile +application/vnd.ms-excel xls xlm xla xlc xlt xlw +application/vnd.ms-excel.addin.macroenabled.12 xlam +application/vnd.ms-excel.sheet.binary.macroenabled.12 xlsb +application/vnd.ms-excel.sheet.macroenabled.12 xlsm +application/vnd.ms-excel.template.macroenabled.12 xltm +application/vnd.ms-fontobject eot +application/vnd.ms-htmlhelp chm +application/vnd.ms-ims ims +application/vnd.ms-lrm lrm +# application/vnd.ms-office.activex+xml +application/vnd.ms-officetheme thmx +# application/vnd.ms-opentype +# application/vnd.ms-package.obfuscated-opentype +application/vnd.ms-pki.seccat cat +application/vnd.ms-pki.stl stl +# application/vnd.ms-playready.initiator+xml +application/vnd.ms-powerpoint ppt pps pot +application/vnd.ms-powerpoint.addin.macroenabled.12 ppam +application/vnd.ms-powerpoint.presentation.macroenabled.12 pptm +application/vnd.ms-powerpoint.slide.macroenabled.12 sldm +application/vnd.ms-powerpoint.slideshow.macroenabled.12 ppsm +application/vnd.ms-powerpoint.template.macroenabled.12 potm +# application/vnd.ms-printing.printticket+xml +application/vnd.ms-project mpp mpt +# application/vnd.ms-tnef +# application/vnd.ms-wmdrm.lic-chlg-req +# application/vnd.ms-wmdrm.lic-resp +# application/vnd.ms-wmdrm.meter-chlg-req +# application/vnd.ms-wmdrm.meter-resp +application/vnd.ms-word.document.macroenabled.12 docm +application/vnd.ms-word.template.macroenabled.12 dotm +application/vnd.ms-works wps wks wcm wdb +application/vnd.ms-wpl wpl +application/vnd.ms-xpsdocument xps +application/vnd.mseq mseq +# application/vnd.msign +# application/vnd.multiad.creator +# application/vnd.multiad.creator.cif +# application/vnd.music-niff +application/vnd.musician mus +application/vnd.muvee.style msty +application/vnd.mynfc taglet +# application/vnd.ncd.control +# application/vnd.ncd.reference +# application/vnd.nervana +# application/vnd.netfpx +application/vnd.neurolanguage.nlu nlu +application/vnd.nitf ntf nitf +application/vnd.noblenet-directory nnd +application/vnd.noblenet-sealer nns +application/vnd.noblenet-web nnw +# application/vnd.nokia.catalogs +# application/vnd.nokia.conml+wbxml +# application/vnd.nokia.conml+xml +# application/vnd.nokia.isds-radio-presets +# application/vnd.nokia.iptv.config+xml +# application/vnd.nokia.landmark+wbxml +# application/vnd.nokia.landmark+xml +# application/vnd.nokia.landmarkcollection+xml +# application/vnd.nokia.n-gage.ac+xml +application/vnd.nokia.n-gage.data ngdat +application/vnd.nokia.n-gage.symbian.install n-gage +# application/vnd.nokia.ncd +# application/vnd.nokia.pcd+wbxml +# application/vnd.nokia.pcd+xml +application/vnd.nokia.radio-preset rpst +application/vnd.nokia.radio-presets rpss +application/vnd.novadigm.edm edm +application/vnd.novadigm.edx edx +application/vnd.novadigm.ext ext +# application/vnd.ntt-local.file-transfer +# application/vnd.ntt-local.sip-ta_remote +# application/vnd.ntt-local.sip-ta_tcp_stream +application/vnd.oasis.opendocument.chart odc +application/vnd.oasis.opendocument.chart-template otc +application/vnd.oasis.opendocument.database odb +application/vnd.oasis.opendocument.formula odf +application/vnd.oasis.opendocument.formula-template odft +application/vnd.oasis.opendocument.graphics odg +application/vnd.oasis.opendocument.graphics-template otg +application/vnd.oasis.opendocument.image odi +application/vnd.oasis.opendocument.image-template oti +application/vnd.oasis.opendocument.presentation odp +application/vnd.oasis.opendocument.presentation-template otp +application/vnd.oasis.opendocument.spreadsheet ods +application/vnd.oasis.opendocument.spreadsheet-template ots +application/vnd.oasis.opendocument.text odt +application/vnd.oasis.opendocument.text-master odm +application/vnd.oasis.opendocument.text-template ott +application/vnd.oasis.opendocument.text-web oth +# application/vnd.obn +# application/vnd.oftn.l10n+json +# application/vnd.oipf.contentaccessdownload+xml +# application/vnd.oipf.contentaccessstreaming+xml +# application/vnd.oipf.cspg-hexbinary +# application/vnd.oipf.dae.svg+xml +# application/vnd.oipf.dae.xhtml+xml +# application/vnd.oipf.mippvcontrolmessage+xml +# application/vnd.oipf.pae.gem +# application/vnd.oipf.spdiscovery+xml +# application/vnd.oipf.spdlist+xml +# application/vnd.oipf.ueprofile+xml +# application/vnd.oipf.userprofile+xml +application/vnd.olpc-sugar xo +# application/vnd.oma-scws-config +# application/vnd.oma-scws-http-request +# application/vnd.oma-scws-http-response +# application/vnd.oma.bcast.associated-procedure-parameter+xml +# application/vnd.oma.bcast.drm-trigger+xml +# application/vnd.oma.bcast.imd+xml +# application/vnd.oma.bcast.ltkm +# application/vnd.oma.bcast.notification+xml +# application/vnd.oma.bcast.provisioningtrigger +# application/vnd.oma.bcast.sgboot +# application/vnd.oma.bcast.sgdd+xml +# application/vnd.oma.bcast.sgdu +# application/vnd.oma.bcast.simple-symbol-container +# application/vnd.oma.bcast.smartcard-trigger+xml +# application/vnd.oma.bcast.sprov+xml +# application/vnd.oma.bcast.stkm +# application/vnd.oma.cab-address-book+xml +# application/vnd.oma.cab-feature-handler+xml +# application/vnd.oma.cab-pcc+xml +# application/vnd.oma.cab-user-prefs+xml +# application/vnd.oma.dcd +# application/vnd.oma.dcdc +application/vnd.oma.dd2+xml dd2 +# application/vnd.oma.drm.risd+xml +# application/vnd.oma.group-usage-list+xml +# application/vnd.oma.pal+xml +# application/vnd.oma.poc.detailed-progress-report+xml +# application/vnd.oma.poc.final-report+xml +# application/vnd.oma.poc.groups+xml +# application/vnd.oma.poc.invocation-descriptor+xml +# application/vnd.oma.poc.optimized-progress-report+xml +# application/vnd.oma.push +# application/vnd.oma.scidm.messages+xml +# application/vnd.oma.xcap-directory+xml +# application/vnd.omads-email+xml +# application/vnd.omads-file+xml +# application/vnd.omads-folder+xml +# application/vnd.omaloc-supl-init +application/vnd.openofficeorg.extension oxt +# application/vnd.openxmlformats-officedocument.custom-properties+xml +# application/vnd.openxmlformats-officedocument.customxmlproperties+xml +# application/vnd.openxmlformats-officedocument.drawing+xml +# application/vnd.openxmlformats-officedocument.drawingml.chart+xml +# application/vnd.openxmlformats-officedocument.drawingml.chartshapes+xml +# application/vnd.openxmlformats-officedocument.drawingml.diagramcolors+xml +# application/vnd.openxmlformats-officedocument.drawingml.diagramdata+xml +# application/vnd.openxmlformats-officedocument.drawingml.diagramlayout+xml +# application/vnd.openxmlformats-officedocument.drawingml.diagramstyle+xml +# application/vnd.openxmlformats-officedocument.extended-properties+xml +# application/vnd.openxmlformats-officedocument.presentationml.commentauthors+xml +# application/vnd.openxmlformats-officedocument.presentationml.comments+xml +# application/vnd.openxmlformats-officedocument.presentationml.handoutmaster+xml +# application/vnd.openxmlformats-officedocument.presentationml.notesmaster+xml +# application/vnd.openxmlformats-officedocument.presentationml.notesslide+xml +application/vnd.openxmlformats-officedocument.presentationml.presentation pptx +# application/vnd.openxmlformats-officedocument.presentationml.presentation.main+xml +# application/vnd.openxmlformats-officedocument.presentationml.presprops+xml +application/vnd.openxmlformats-officedocument.presentationml.slide sldx +# application/vnd.openxmlformats-officedocument.presentationml.slide+xml +# application/vnd.openxmlformats-officedocument.presentationml.slidelayout+xml +# application/vnd.openxmlformats-officedocument.presentationml.slidemaster+xml +application/vnd.openxmlformats-officedocument.presentationml.slideshow ppsx +# application/vnd.openxmlformats-officedocument.presentationml.slideshow.main+xml +# application/vnd.openxmlformats-officedocument.presentationml.slideupdateinfo+xml +# application/vnd.openxmlformats-officedocument.presentationml.tablestyles+xml +# application/vnd.openxmlformats-officedocument.presentationml.tags+xml +application/vnd.openxmlformats-officedocument.presentationml.template potx +# application/vnd.openxmlformats-officedocument.presentationml.template.main+xml +# application/vnd.openxmlformats-officedocument.presentationml.viewprops+xml +# application/vnd.openxmlformats-officedocument.spreadsheetml.calcchain+xml +# application/vnd.openxmlformats-officedocument.spreadsheetml.chartsheet+xml +# application/vnd.openxmlformats-officedocument.spreadsheetml.comments+xml +# application/vnd.openxmlformats-officedocument.spreadsheetml.connections+xml +# application/vnd.openxmlformats-officedocument.spreadsheetml.dialogsheet+xml +# application/vnd.openxmlformats-officedocument.spreadsheetml.externallink+xml +# application/vnd.openxmlformats-officedocument.spreadsheetml.pivotcachedefinition+xml +# application/vnd.openxmlformats-officedocument.spreadsheetml.pivotcacherecords+xml +# application/vnd.openxmlformats-officedocument.spreadsheetml.pivottable+xml +# application/vnd.openxmlformats-officedocument.spreadsheetml.querytable+xml +# application/vnd.openxmlformats-officedocument.spreadsheetml.revisionheaders+xml +# application/vnd.openxmlformats-officedocument.spreadsheetml.revisionlog+xml +# application/vnd.openxmlformats-officedocument.spreadsheetml.sharedstrings+xml +application/vnd.openxmlformats-officedocument.spreadsheetml.sheet xlsx +# application/vnd.openxmlformats-officedocument.spreadsheetml.sheet.main+xml +# application/vnd.openxmlformats-officedocument.spreadsheetml.sheetmetadata+xml +# application/vnd.openxmlformats-officedocument.spreadsheetml.styles+xml +# application/vnd.openxmlformats-officedocument.spreadsheetml.table+xml +# application/vnd.openxmlformats-officedocument.spreadsheetml.tablesinglecells+xml +application/vnd.openxmlformats-officedocument.spreadsheetml.template xltx +# application/vnd.openxmlformats-officedocument.spreadsheetml.template.main+xml +# application/vnd.openxmlformats-officedocument.spreadsheetml.usernames+xml +# application/vnd.openxmlformats-officedocument.spreadsheetml.volatiledependencies+xml +# application/vnd.openxmlformats-officedocument.spreadsheetml.worksheet+xml +# application/vnd.openxmlformats-officedocument.theme+xml +# application/vnd.openxmlformats-officedocument.themeoverride+xml +# application/vnd.openxmlformats-officedocument.vmldrawing +# application/vnd.openxmlformats-officedocument.wordprocessingml.comments+xml +application/vnd.openxmlformats-officedocument.wordprocessingml.document docx +# application/vnd.openxmlformats-officedocument.wordprocessingml.document.glossary+xml +# application/vnd.openxmlformats-officedocument.wordprocessingml.document.main+xml +# application/vnd.openxmlformats-officedocument.wordprocessingml.endnotes+xml +# application/vnd.openxmlformats-officedocument.wordprocessingml.fonttable+xml +# application/vnd.openxmlformats-officedocument.wordprocessingml.footer+xml +# application/vnd.openxmlformats-officedocument.wordprocessingml.footnotes+xml +# application/vnd.openxmlformats-officedocument.wordprocessingml.numbering+xml +# application/vnd.openxmlformats-officedocument.wordprocessingml.settings+xml +# application/vnd.openxmlformats-officedocument.wordprocessingml.styles+xml +application/vnd.openxmlformats-officedocument.wordprocessingml.template dotx +# application/vnd.openxmlformats-officedocument.wordprocessingml.template.main+xml +# application/vnd.openxmlformats-officedocument.wordprocessingml.websettings+xml +# application/vnd.openxmlformats-package.core-properties+xml +# application/vnd.openxmlformats-package.digital-signature-xmlsignature+xml +# application/vnd.openxmlformats-package.relationships+xml +# application/vnd.quobject-quoxdocument +# application/vnd.osa.netdeploy +application/vnd.osgeo.mapguide.package mgp +# application/vnd.osgi.bundle +application/vnd.osgi.dp dp +application/vnd.osgi.subsystem esa +# application/vnd.otps.ct-kip+xml +application/vnd.palm pdb pqa oprc +# application/vnd.paos.xml +application/vnd.pawaafile paw +application/vnd.pg.format str +application/vnd.pg.osasli ei6 +# application/vnd.piaccess.application-licence +application/vnd.picsel efif +application/vnd.pmi.widget wg +# application/vnd.poc.group-advertisement+xml +application/vnd.pocketlearn plf +application/vnd.powerbuilder6 pbd +# application/vnd.powerbuilder6-s +# application/vnd.powerbuilder7 +# application/vnd.powerbuilder7-s +# application/vnd.powerbuilder75 +# application/vnd.powerbuilder75-s +# application/vnd.preminet +application/vnd.previewsystems.box box +application/vnd.proteus.magazine mgz +application/vnd.publishare-delta-tree qps +application/vnd.pvi.ptid1 ptid +# application/vnd.pwg-multiplexed +# application/vnd.pwg-xhtml-print+xml +# application/vnd.qualcomm.brew-app-res +application/vnd.quark.quarkxpress qxd qxt qwd qwt qxl qxb +# application/vnd.radisys.moml+xml +# application/vnd.radisys.msml+xml +# application/vnd.radisys.msml-audit+xml +# application/vnd.radisys.msml-audit-conf+xml +# application/vnd.radisys.msml-audit-conn+xml +# application/vnd.radisys.msml-audit-dialog+xml +# application/vnd.radisys.msml-audit-stream+xml +# application/vnd.radisys.msml-conf+xml +# application/vnd.radisys.msml-dialog+xml +# application/vnd.radisys.msml-dialog-base+xml +# application/vnd.radisys.msml-dialog-fax-detect+xml +# application/vnd.radisys.msml-dialog-fax-sendrecv+xml +# application/vnd.radisys.msml-dialog-group+xml +# application/vnd.radisys.msml-dialog-speech+xml +# application/vnd.radisys.msml-dialog-transform+xml +# application/vnd.rainstor.data +# application/vnd.rapid +application/vnd.realvnc.bed bed +application/vnd.recordare.musicxml mxl +application/vnd.recordare.musicxml+xml musicxml +# application/vnd.renlearn.rlprint +application/vnd.rig.cryptonote cryptonote +application/vnd.rim.cod cod +application/vnd.rn-realmedia rm +application/vnd.rn-realmedia-vbr rmvb +application/vnd.route66.link66+xml link66 +# application/vnd.rs-274x +# application/vnd.ruckus.download +# application/vnd.s3sms +application/vnd.sailingtracker.track st +# application/vnd.sbm.cid +# application/vnd.sbm.mid2 +# application/vnd.scribus +# application/vnd.sealed.3df +# application/vnd.sealed.csf +# application/vnd.sealed.doc +# application/vnd.sealed.eml +# application/vnd.sealed.mht +# application/vnd.sealed.net +# application/vnd.sealed.ppt +# application/vnd.sealed.tiff +# application/vnd.sealed.xls +# application/vnd.sealedmedia.softseal.html +# application/vnd.sealedmedia.softseal.pdf +application/vnd.seemail see +application/vnd.sema sema +application/vnd.semd semd +application/vnd.semf semf +application/vnd.shana.informed.formdata ifm +application/vnd.shana.informed.formtemplate itp +application/vnd.shana.informed.interchange iif +application/vnd.shana.informed.package ipk +application/vnd.simtech-mindmapper twd twds +application/vnd.smaf mmf +# application/vnd.smart.notebook +application/vnd.smart.teacher teacher +# application/vnd.software602.filler.form+xml +# application/vnd.software602.filler.form-xml-zip +application/vnd.solent.sdkm+xml sdkm sdkd +application/vnd.spotfire.dxp dxp +application/vnd.spotfire.sfs sfs +# application/vnd.sss-cod +# application/vnd.sss-dtf +# application/vnd.sss-ntf +application/vnd.stardivision.calc sdc +application/vnd.stardivision.draw sda +application/vnd.stardivision.impress sdd +application/vnd.stardivision.math smf +application/vnd.stardivision.writer sdw vor +application/vnd.stardivision.writer-global sgl +application/vnd.stepmania.package smzip +application/vnd.stepmania.stepchart sm +# application/vnd.street-stream +application/vnd.sun.xml.calc sxc +application/vnd.sun.xml.calc.template stc +application/vnd.sun.xml.draw sxd +application/vnd.sun.xml.draw.template std +application/vnd.sun.xml.impress sxi +application/vnd.sun.xml.impress.template sti +application/vnd.sun.xml.math sxm +application/vnd.sun.xml.writer sxw +application/vnd.sun.xml.writer.global sxg +application/vnd.sun.xml.writer.template stw +# application/vnd.sun.wadl+xml +application/vnd.sus-calendar sus susp +application/vnd.svd svd +# application/vnd.swiftview-ics +application/vnd.symbian.install sis sisx +application/vnd.syncml+xml xsm +application/vnd.syncml.dm+wbxml bdm +application/vnd.syncml.dm+xml xdm +# application/vnd.syncml.dm.notification +# application/vnd.syncml.ds.notification +application/vnd.tao.intent-module-archive tao +application/vnd.tcpdump.pcap pcap cap dmp +application/vnd.tmobile-livetv tmo +application/vnd.trid.tpt tpt +application/vnd.triscape.mxs mxs +application/vnd.trueapp tra +# application/vnd.truedoc +# application/vnd.ubisoft.webplayer +application/vnd.ufdl ufd ufdl +application/vnd.uiq.theme utz +application/vnd.umajin umj +application/vnd.unity unityweb +application/vnd.uoml+xml uoml +# application/vnd.uplanet.alert +# application/vnd.uplanet.alert-wbxml +# application/vnd.uplanet.bearer-choice +# application/vnd.uplanet.bearer-choice-wbxml +# application/vnd.uplanet.cacheop +# application/vnd.uplanet.cacheop-wbxml +# application/vnd.uplanet.channel +# application/vnd.uplanet.channel-wbxml +# application/vnd.uplanet.list +# application/vnd.uplanet.list-wbxml +# application/vnd.uplanet.listcmd +# application/vnd.uplanet.listcmd-wbxml +# application/vnd.uplanet.signal +application/vnd.vcx vcx +# application/vnd.vd-study +# application/vnd.vectorworks +# application/vnd.verimatrix.vcas +# application/vnd.vidsoft.vidconference +application/vnd.visio vsd vst vss vsw +application/vnd.visionary vis +# application/vnd.vividence.scriptfile +application/vnd.vsf vsf +# application/vnd.wap.sic +# application/vnd.wap.slc +application/vnd.wap.wbxml wbxml +application/vnd.wap.wmlc wmlc +application/vnd.wap.wmlscriptc wmlsc +application/vnd.webturbo wtb +# application/vnd.wfa.wsc +# application/vnd.wmc +# application/vnd.wmf.bootstrap +# application/vnd.wolfram.mathematica +# application/vnd.wolfram.mathematica.package +application/vnd.wolfram.player nbp +application/vnd.wordperfect wpd +application/vnd.wqd wqd +# application/vnd.wrq-hp3000-labelled +application/vnd.wt.stf stf +# application/vnd.wv.csp+wbxml +# application/vnd.wv.csp+xml +# application/vnd.wv.ssp+xml +application/vnd.xara xar +application/vnd.xfdl xfdl +# application/vnd.xfdl.webform +# application/vnd.xmi+xml +# application/vnd.xmpie.cpkg +# application/vnd.xmpie.dpkg +# application/vnd.xmpie.plan +# application/vnd.xmpie.ppkg +# application/vnd.xmpie.xlim +application/vnd.yamaha.hv-dic hvd +application/vnd.yamaha.hv-script hvs +application/vnd.yamaha.hv-voice hvp +application/vnd.yamaha.openscoreformat osf +application/vnd.yamaha.openscoreformat.osfpvg+xml osfpvg +# application/vnd.yamaha.remote-setup +application/vnd.yamaha.smaf-audio saf +application/vnd.yamaha.smaf-phrase spf +# application/vnd.yamaha.through-ngn +# application/vnd.yamaha.tunnel-udpencap +application/vnd.yellowriver-custom-menu cmp +application/vnd.zul zir zirz +application/vnd.zzazz.deck+xml zaz +application/voicexml+xml vxml +# application/vq-rtcpxr +# application/watcherinfo+xml +# application/whoispp-query +# application/whoispp-response +application/widget wgt +application/winhlp hlp +# application/wita +# application/wordperfect5.1 +application/wsdl+xml wsdl +application/wspolicy+xml wspolicy +application/x-7z-compressed 7z +application/x-abiword abw +application/x-ace-compressed ace +# application/x-amf +application/x-apple-diskimage dmg +application/x-authorware-bin aab x32 u32 vox +application/x-authorware-map aam +application/x-authorware-seg aas +application/x-bcpio bcpio +application/x-bittorrent torrent +application/x-blorb blb blorb +application/x-bzip bz +application/x-bzip2 bz2 boz +application/x-cbr cbr cba cbt cbz cb7 +application/x-cdlink vcd +application/x-cfs-compressed cfs +application/x-chat chat +application/x-chess-pgn pgn +application/x-conference nsc +# application/x-compress +application/x-cpio cpio +application/x-csh csh +application/x-debian-package deb udeb +application/x-dgc-compressed dgc +application/x-director dir dcr dxr cst cct cxt w3d fgd swa +application/x-doom wad +application/x-dtbncx+xml ncx +application/x-dtbook+xml dtb +application/x-dtbresource+xml res +application/x-dvi dvi +application/x-envoy evy +application/x-eva eva +application/x-font-bdf bdf +# application/x-font-dos +# application/x-font-framemaker +application/x-font-ghostscript gsf +# application/x-font-libgrx +application/x-font-linux-psf psf +application/x-font-otf otf +application/x-font-pcf pcf +application/x-font-snf snf +# application/x-font-speedo +# application/x-font-sunos-news +application/x-font-ttf ttf ttc +application/x-font-type1 pfa pfb pfm afm +application/x-font-woff woff +# application/x-font-vfont +application/x-freearc arc +application/x-futuresplash spl +application/x-gca-compressed gca +application/x-glulx ulx +application/x-gnumeric gnumeric +application/x-gramps-xml gramps +application/x-gtar gtar +# application/x-gzip +application/x-hdf hdf +application/x-install-instructions install +application/x-iso9660-image iso +application/x-java-jnlp-file jnlp +application/x-latex latex +application/x-lzh-compressed lzh lha +application/x-mie mie +application/x-mobipocket-ebook prc mobi +application/x-ms-application application +application/x-ms-shortcut lnk +application/x-ms-wmd wmd +application/x-ms-wmz wmz +application/x-ms-xbap xbap +application/x-msaccess mdb +application/x-msbinder obd +application/x-mscardfile crd +application/x-msclip clp +application/x-msdownload exe dll com bat msi +application/x-msmediaview mvb m13 m14 +application/x-msmetafile wmf wmz emf emz +application/x-msmoney mny +application/x-mspublisher pub +application/x-msschedule scd +application/x-msterminal trm +application/x-mswrite wri +application/x-netcdf nc cdf +application/x-nzb nzb +application/x-pkcs12 p12 pfx +application/x-pkcs7-certificates p7b spc +application/x-pkcs7-certreqresp p7r +application/x-rar-compressed rar +application/x-research-info-systems ris +application/x-sh sh +application/x-shar shar +application/x-shockwave-flash swf +application/x-silverlight-app xap +application/x-sql sql +application/x-stuffit sit +application/x-stuffitx sitx +application/x-subrip srt +application/x-sv4cpio sv4cpio +application/x-sv4crc sv4crc +application/x-t3vm-image t3 +application/x-tads gam +application/x-tar tar +application/x-tcl tcl +application/x-tex tex +application/x-tex-tfm tfm +application/x-texinfo texinfo texi +application/x-tgif obj +application/x-ustar ustar +application/x-wais-source src +application/x-x509-ca-cert der crt +application/x-xfig fig +application/x-xliff+xml xlf +application/x-xpinstall xpi +application/x-xz xz +application/x-zmachine z1 z2 z3 z4 z5 z6 z7 z8 +# application/x400-bp +application/xaml+xml xaml +# application/xcap-att+xml +# application/xcap-caps+xml +application/xcap-diff+xml xdf +# application/xcap-el+xml +# application/xcap-error+xml +# application/xcap-ns+xml +# application/xcon-conference-info-diff+xml +# application/xcon-conference-info+xml +application/xenc+xml xenc +application/xhtml+xml xhtml xht +# application/xhtml-voice+xml +application/xml xml xsl +application/xml-dtd dtd +# application/xml-external-parsed-entity +# application/xmpp+xml +application/xop+xml xop +application/xproc+xml xpl +application/xslt+xml xslt +application/xspf+xml xspf +application/xv+xml mxml xhvml xvml xvm +application/yang yang +application/yin+xml yin +application/zip zip +# audio/1d-interleaved-parityfec +# audio/32kadpcm +# audio/3gpp +# audio/3gpp2 +# audio/ac3 +audio/adpcm adp +# audio/amr +# audio/amr-wb +# audio/amr-wb+ +# audio/asc +# audio/atrac-advanced-lossless +# audio/atrac-x +# audio/atrac3 +audio/basic au snd +# audio/bv16 +# audio/bv32 +# audio/clearmode +# audio/cn +# audio/dat12 +# audio/dls +# audio/dsr-es201108 +# audio/dsr-es202050 +# audio/dsr-es202211 +# audio/dsr-es202212 +# audio/dv +# audio/dvi4 +# audio/eac3 +# audio/evrc +# audio/evrc-qcp +# audio/evrc0 +# audio/evrc1 +# audio/evrcb +# audio/evrcb0 +# audio/evrcb1 +# audio/evrcwb +# audio/evrcwb0 +# audio/evrcwb1 +# audio/example +# audio/fwdred +# audio/g719 +# audio/g722 +# audio/g7221 +# audio/g723 +# audio/g726-16 +# audio/g726-24 +# audio/g726-32 +# audio/g726-40 +# audio/g728 +# audio/g729 +# audio/g7291 +# audio/g729d +# audio/g729e +# audio/gsm +# audio/gsm-efr +# audio/gsm-hr-08 +# audio/ilbc +# audio/ip-mr_v2.5 +# audio/isac +# audio/l16 +# audio/l20 +# audio/l24 +# audio/l8 +# audio/lpc +audio/midi mid midi kar rmi +# audio/mobile-xmf +audio/mp4 m4a mp4a +# audio/mp4a-latm +# audio/mpa +# audio/mpa-robust +audio/mpeg mpga mp2 mp2a mp3 m2a m3a +# audio/mpeg4-generic +# audio/musepack +audio/ogg oga ogg spx +# audio/opus +# audio/parityfec +# audio/pcma +# audio/pcma-wb +# audio/pcmu-wb +# audio/pcmu +# audio/prs.sid +# audio/qcelp +# audio/red +# audio/rtp-enc-aescm128 +# audio/rtp-midi +# audio/rtx +audio/s3m s3m +audio/silk sil +# audio/smv +# audio/smv0 +# audio/smv-qcp +# audio/sp-midi +# audio/speex +# audio/t140c +# audio/t38 +# audio/telephone-event +# audio/tone +# audio/uemclip +# audio/ulpfec +# audio/vdvi +# audio/vmr-wb +# audio/vnd.3gpp.iufp +# audio/vnd.4sb +# audio/vnd.audiokoz +# audio/vnd.celp +# audio/vnd.cisco.nse +# audio/vnd.cmles.radio-events +# audio/vnd.cns.anp1 +# audio/vnd.cns.inf1 +audio/vnd.dece.audio uva uvva +audio/vnd.digital-winds eol +# audio/vnd.dlna.adts +# audio/vnd.dolby.heaac.1 +# audio/vnd.dolby.heaac.2 +# audio/vnd.dolby.mlp +# audio/vnd.dolby.mps +# audio/vnd.dolby.pl2 +# audio/vnd.dolby.pl2x +# audio/vnd.dolby.pl2z +# audio/vnd.dolby.pulse.1 +audio/vnd.dra dra +audio/vnd.dts dts +audio/vnd.dts.hd dtshd +# audio/vnd.dvb.file +# audio/vnd.everad.plj +# audio/vnd.hns.audio +audio/vnd.lucent.voice lvp +audio/vnd.ms-playready.media.pya pya +# audio/vnd.nokia.mobile-xmf +# audio/vnd.nortel.vbk +audio/vnd.nuera.ecelp4800 ecelp4800 +audio/vnd.nuera.ecelp7470 ecelp7470 +audio/vnd.nuera.ecelp9600 ecelp9600 +# audio/vnd.octel.sbc +# audio/vnd.qcelp +# audio/vnd.rhetorex.32kadpcm +audio/vnd.rip rip +# audio/vnd.sealedmedia.softseal.mpeg +# audio/vnd.vmx.cvsd +# audio/vorbis +# audio/vorbis-config +audio/webm weba +audio/x-aac aac +audio/x-aiff aif aiff aifc +audio/x-caf caf +audio/x-flac flac +audio/x-matroska mka +audio/x-mpegurl m3u +audio/x-ms-wax wax +audio/x-ms-wma wma +audio/x-pn-realaudio ram ra +audio/x-pn-realaudio-plugin rmp +# audio/x-tta +audio/x-wav wav +audio/xm xm +chemical/x-cdx cdx +chemical/x-cif cif +chemical/x-cmdf cmdf +chemical/x-cml cml +chemical/x-csml csml +# chemical/x-pdb +chemical/x-xyz xyz +image/bmp bmp +image/cgm cgm +# image/example +# image/fits +image/g3fax g3 +image/gif gif +image/ief ief +# image/jp2 +image/jpeg jpeg jpg jpe +# image/jpm +# image/jpx +image/ktx ktx +# image/naplps +image/png png +image/prs.btif btif +# image/prs.pti +image/sgi sgi +image/svg+xml svg svgz +# image/t38 +image/tiff tiff tif +# image/tiff-fx +image/vnd.adobe.photoshop psd +# image/vnd.cns.inf2 +image/vnd.dece.graphic uvi uvvi uvg uvvg +image/vnd.dvb.subtitle sub +image/vnd.djvu djvu djv +image/vnd.dwg dwg +image/vnd.dxf dxf +image/vnd.fastbidsheet fbs +image/vnd.fpx fpx +image/vnd.fst fst +image/vnd.fujixerox.edmics-mmr mmr +image/vnd.fujixerox.edmics-rlc rlc +# image/vnd.globalgraphics.pgb +# image/vnd.microsoft.icon +# image/vnd.mix +image/vnd.ms-modi mdi +image/vnd.ms-photo wdp +image/vnd.net-fpx npx +# image/vnd.radiance +# image/vnd.sealed.png +# image/vnd.sealedmedia.softseal.gif +# image/vnd.sealedmedia.softseal.jpg +# image/vnd.svf +image/vnd.wap.wbmp wbmp +image/vnd.xiff xif +image/webp webp +image/x-3ds 3ds +image/x-cmu-raster ras +image/x-cmx cmx +image/x-freehand fh fhc fh4 fh5 fh7 +image/x-icon ico +image/x-mrsid-image sid +image/x-pcx pcx +image/x-pict pic pct +image/x-portable-anymap pnm +image/x-portable-bitmap pbm +image/x-portable-graymap pgm +image/x-portable-pixmap ppm +image/x-rgb rgb +image/x-tga tga +image/x-xbitmap xbm +image/x-xpixmap xpm +image/x-xwindowdump xwd +# message/cpim +# message/delivery-status +# message/disposition-notification +# message/example +# message/external-body +# message/feedback-report +# message/global +# message/global-delivery-status +# message/global-disposition-notification +# message/global-headers +# message/http +# message/imdn+xml +# message/news +# message/partial +message/rfc822 eml mime +# message/s-http +# message/sip +# message/sipfrag +# message/tracking-status +# message/vnd.si.simp +# model/example +model/iges igs iges +model/mesh msh mesh silo +model/vnd.collada+xml dae +model/vnd.dwf dwf +# model/vnd.flatland.3dml +model/vnd.gdl gdl +# model/vnd.gs-gdl +# model/vnd.gs.gdl +model/vnd.gtw gtw +# model/vnd.moml+xml +model/vnd.mts mts +# model/vnd.parasolid.transmit.binary +# model/vnd.parasolid.transmit.text +model/vnd.vtu vtu +model/vrml wrl vrml +model/x3d+binary x3db x3dbz +model/x3d+vrml x3dv x3dvz +model/x3d+xml x3d x3dz +# multipart/alternative +# multipart/appledouble +# multipart/byteranges +# multipart/digest +# multipart/encrypted +# multipart/example +# multipart/form-data +# multipart/header-set +# multipart/mixed +# multipart/parallel +# multipart/related +# multipart/report +# multipart/signed +# multipart/voice-message +# text/1d-interleaved-parityfec +text/cache-manifest appcache +text/calendar ics ifb +text/css css +text/csv csv +# text/directory +# text/dns +# text/ecmascript +# text/enriched +# text/example +# text/fwdred +text/html html htm +# text/javascript +text/n3 n3 +# text/parityfec +text/plain txt text conf def list log in +# text/prs.fallenstein.rst +text/prs.lines.tag dsc +# text/vnd.radisys.msml-basic-layout +# text/red +# text/rfc822-headers +text/richtext rtx +# text/rtf +# text/rtp-enc-aescm128 +# text/rtx +text/sgml sgml sgm +# text/t140 +text/tab-separated-values tsv +text/troff t tr roff man me ms +text/turtle ttl +# text/ulpfec +text/uri-list uri uris urls +text/vcard vcard +# text/vnd.abc +text/vnd.curl curl +text/vnd.curl.dcurl dcurl +text/vnd.curl.scurl scurl +text/vnd.curl.mcurl mcurl +# text/vnd.dmclientscript +text/vnd.dvb.subtitle sub +# text/vnd.esmertec.theme-descriptor +text/vnd.fly fly +text/vnd.fmi.flexstor flx +text/vnd.graphviz gv +text/vnd.in3d.3dml 3dml +text/vnd.in3d.spot spot +# text/vnd.iptc.newsml +# text/vnd.iptc.nitf +# text/vnd.latex-z +# text/vnd.motorola.reflex +# text/vnd.ms-mediapackage +# text/vnd.net2phone.commcenter.command +# text/vnd.si.uricatalogue +text/vnd.sun.j2me.app-descriptor jad +# text/vnd.trolltech.linguist +# text/vnd.wap.si +# text/vnd.wap.sl +text/vnd.wap.wml wml +text/vnd.wap.wmlscript wmls +text/x-asm s asm +text/x-c c cc cxx cpp h hh dic +text/x-fortran f for f77 f90 +text/x-java-source java +text/x-opml opml +text/x-pascal p pas +text/x-nfo nfo +text/x-setext etx +text/x-sfv sfv +text/x-uuencode uu +text/x-vcalendar vcs +text/x-vcard vcf +# text/xml +# text/xml-external-parsed-entity +# video/1d-interleaved-parityfec +video/3gpp 3gp +# video/3gpp-tt +video/3gpp2 3g2 +# video/bmpeg +# video/bt656 +# video/celb +# video/dv +# video/example +video/h261 h261 +video/h263 h263 +# video/h263-1998 +# video/h263-2000 +video/h264 h264 +# video/h264-rcdo +# video/h264-svc +video/jpeg jpgv +# video/jpeg2000 +video/jpm jpm jpgm +video/mj2 mj2 mjp2 +# video/mp1s +# video/mp2p +# video/mp2t +video/mp4 mp4 mp4v mpg4 +# video/mp4v-es +video/mpeg mpeg mpg mpe m1v m2v +# video/mpeg4-generic +# video/mpv +# video/nv +video/ogg ogv +# video/parityfec +# video/pointer +video/quicktime qt mov +# video/raw +# video/rtp-enc-aescm128 +# video/rtx +# video/smpte292m +# video/ulpfec +# video/vc1 +# video/vnd.cctv +video/vnd.dece.hd uvh uvvh +video/vnd.dece.mobile uvm uvvm +# video/vnd.dece.mp4 +video/vnd.dece.pd uvp uvvp +video/vnd.dece.sd uvs uvvs +video/vnd.dece.video uvv uvvv +# video/vnd.directv.mpeg +# video/vnd.directv.mpeg-tts +# video/vnd.dlna.mpeg-tts +video/vnd.dvb.file dvb +video/vnd.fvt fvt +# video/vnd.hns.video +# video/vnd.iptvforum.1dparityfec-1010 +# video/vnd.iptvforum.1dparityfec-2005 +# video/vnd.iptvforum.2dparityfec-1010 +# video/vnd.iptvforum.2dparityfec-2005 +# video/vnd.iptvforum.ttsavc +# video/vnd.iptvforum.ttsmpeg2 +# video/vnd.motorola.video +# video/vnd.motorola.videop +video/vnd.mpegurl mxu m4u +video/vnd.ms-playready.media.pyv pyv +# video/vnd.nokia.interleaved-multimedia +# video/vnd.nokia.videovoip +# video/vnd.objectvideo +# video/vnd.sealed.mpeg1 +# video/vnd.sealed.mpeg4 +# video/vnd.sealed.swf +# video/vnd.sealedmedia.softseal.mov +video/vnd.uvvu.mp4 uvu uvvu +video/vnd.vivo viv +video/webm webm +video/x-f4v f4v +video/x-fli fli +video/x-flv flv +video/x-m4v m4v +video/x-matroska mkv mk3d mks +video/x-mng mng +video/x-ms-asf asf asx +video/x-ms-vob vob +video/x-ms-wm wm +video/x-ms-wmv wmv +video/x-ms-wmx wmx +video/x-ms-wvx wvx +video/x-msvideo avi +video/x-sgi-movie movie +video/x-smv smv +x-conference/x-cooltalk ice diff --git a/setup/projects/katrin/files/etc/apache2-kaas-docker/original/extra/httpd-autoindex.conf b/setup/projects/katrin/files/etc/apache2-kaas-docker/original/extra/httpd-autoindex.conf new file mode 100644 index 0000000..c581e97 --- /dev/null +++ b/setup/projects/katrin/files/etc/apache2-kaas-docker/original/extra/httpd-autoindex.conf @@ -0,0 +1,93 @@ +# +# Directives controlling the display of server-generated directory listings. +# +# Required modules: mod_autoindex, mod_alias +# +# To see the listing of a directory, the Options directive for the +# directory must include "Indexes", and the directory must not contain +# a file matching those listed in the DirectoryIndex directive. +# + +# +# IndexOptions: Controls the appearance of server-generated directory +# listings. +# +IndexOptions FancyIndexing HTMLTable VersionSort + +# We include the /icons/ alias for FancyIndexed directory listings. If +# you do not use FancyIndexing, you may comment this out. +# +Alias /icons/ "/usr/local/apache2/icons/" + + + Options Indexes MultiViews + AllowOverride None + Order allow,deny + Allow from all + + +# +# AddIcon* directives tell the server which icon to show for different +# files or filename extensions. These are only displayed for +# FancyIndexed directories. +# +AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip + +AddIconByType (TXT,/icons/text.gif) text/* +AddIconByType (IMG,/icons/image2.gif) image/* +AddIconByType (SND,/icons/sound2.gif) audio/* +AddIconByType (VID,/icons/movie.gif) video/* + +AddIcon /icons/binary.gif .bin .exe +AddIcon /icons/binhex.gif .hqx +AddIcon /icons/tar.gif .tar +AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv +AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip +AddIcon /icons/a.gif .ps .ai .eps +AddIcon /icons/layout.gif .html .shtml .htm .pdf +AddIcon /icons/text.gif .txt +AddIcon /icons/c.gif .c +AddIcon /icons/p.gif .pl .py +AddIcon /icons/f.gif .for +AddIcon /icons/dvi.gif .dvi +AddIcon /icons/uuencoded.gif .uu +AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl +AddIcon /icons/tex.gif .tex +AddIcon /icons/bomb.gif core + +AddIcon /icons/back.gif .. +AddIcon /icons/hand.right.gif README +AddIcon /icons/folder.gif ^^DIRECTORY^^ +AddIcon /icons/blank.gif ^^BLANKICON^^ + +# +# DefaultIcon is which icon to show for files which do not have an icon +# explicitly set. +# +DefaultIcon /icons/unknown.gif + +# +# AddDescription allows you to place a short description after a file in +# server-generated indexes. These are only displayed for FancyIndexed +# directories. +# Format: AddDescription "description" filename +# +#AddDescription "GZIP compressed document" .gz +#AddDescription "tar archive" .tar +#AddDescription "GZIP compressed tar archive" .tgz + +# +# ReadmeName is the name of the README file the server will look for by +# default, and append to directory listings. +# +# HeaderName is the name of a file which should be prepended to +# directory indexes. +ReadmeName README.html +HeaderName HEADER.html + +# +# IndexIgnore is a set of filenames which directory indexing should ignore +# and not include in the listing. Shell-style wildcarding is permitted. +# +IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t + diff --git a/setup/projects/katrin/files/etc/apache2-kaas-docker/original/extra/httpd-dav.conf b/setup/projects/katrin/files/etc/apache2-kaas-docker/original/extra/httpd-dav.conf new file mode 100644 index 0000000..29dfb72 --- /dev/null +++ b/setup/projects/katrin/files/etc/apache2-kaas-docker/original/extra/httpd-dav.conf @@ -0,0 +1,52 @@ +# +# Distributed authoring and versioning (WebDAV) +# +# Required modules: mod_dav, mod_dav_fs, mod_setenvif, mod_alias +# mod_auth_digest, mod_authn_file +# + +# The following example gives DAV write access to a directory called +# "uploads" under the ServerRoot directory. +# +# The User/Group specified in httpd.conf needs to have write permissions +# on the directory where the DavLockDB is placed and on any directory where +# "Dav On" is specified. + +DavLockDB "/usr/local/apache2/var/DavLock" + +Alias /uploads "/usr/local/apache2/uploads" + + + Dav On + + Order Allow,Deny + Allow from all + + AuthType Digest + AuthName DAV-upload + + # You can use the htdigest program to create the password database: + # htdigest -c "/usr/local/apache2/user.passwd" DAV-upload admin + AuthUserFile "/usr/local/apache2/user.passwd" + AuthDigestProvider file + + # Allow universal read-access, but writes are restricted + # to the admin user. + + require user admin + + + +# +# The following directives disable redirects on non-GET requests for +# a directory that does not include the trailing slash. This fixes a +# problem with several clients that do not appropriately handle +# redirects for folders with DAV methods. +# +BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully +BrowserMatch "MS FrontPage" redirect-carefully +BrowserMatch "^WebDrive" redirect-carefully +BrowserMatch "^WebDAVFS/1.[0123]" redirect-carefully +BrowserMatch "^gnome-vfs/1.0" redirect-carefully +BrowserMatch "^XML Spy" redirect-carefully +BrowserMatch "^Dreamweaver-WebDAV-SCM1" redirect-carefully diff --git a/setup/projects/katrin/files/etc/apache2-kaas-docker/original/extra/httpd-default.conf b/setup/projects/katrin/files/etc/apache2-kaas-docker/original/extra/httpd-default.conf new file mode 100644 index 0000000..efeca05 --- /dev/null +++ b/setup/projects/katrin/files/etc/apache2-kaas-docker/original/extra/httpd-default.conf @@ -0,0 +1,75 @@ +# +# This configuration file reflects default settings for Apache HTTP Server. +# +# You may change these, but chances are that you may not need to. +# + +# +# Timeout: The number of seconds before receives and sends time out. +# +Timeout 300 + +# +# KeepAlive: Whether or not to allow persistent connections (more than +# one request per connection). Set to "Off" to deactivate. +# +KeepAlive On + +# +# MaxKeepAliveRequests: The maximum number of requests to allow +# during a persistent connection. Set to 0 to allow an unlimited amount. +# We recommend you leave this number high, for maximum performance. +# +MaxKeepAliveRequests 100 + +# +# KeepAliveTimeout: Number of seconds to wait for the next request from the +# same client on the same connection. +# +KeepAliveTimeout 5 + +# +# UseCanonicalName: Determines how Apache constructs self-referencing +# URLs and the SERVER_NAME and SERVER_PORT variables. +# When set "Off", Apache will use the Hostname and Port supplied +# by the client. When set "On", Apache will use the value of the +# ServerName directive. +# +UseCanonicalName Off + +# +# AccessFileName: The name of the file to look for in each directory +# for additional configuration directives. See also the AllowOverride +# directive. +# +AccessFileName .htaccess + +# +# ServerTokens +# This directive configures what you return as the Server HTTP response +# Header. The default is 'Full' which sends information about the OS-Type +# and compiled in modules. +# Set to one of: Full | OS | Minor | Minimal | Major | Prod +# where Full conveys the most information, and Prod the least. +# +ServerTokens Full + +# +# Optionally add a line containing the server version and virtual host +# name to server-generated pages (internal error documents, FTP directory +# listings, mod_status and mod_info output etc., but not CGI generated +# documents or custom error documents). +# Set to "EMail" to also include a mailto: link to the ServerAdmin. +# Set to one of: On | Off | EMail +# +ServerSignature On + +# +# HostnameLookups: Log the names of clients or just their IP addresses +# e.g., www.apache.org (on) or 204.62.129.132 (off). +# The default is off because it'd be overall better for the net if people +# had to knowingly turn this feature on, since enabling it means that +# each client request will result in AT LEAST one lookup request to the +# nameserver. +# +HostnameLookups Off diff --git a/setup/projects/katrin/files/etc/apache2-kaas-docker/original/extra/httpd-info.conf b/setup/projects/katrin/files/etc/apache2-kaas-docker/original/extra/httpd-info.conf new file mode 100644 index 0000000..db316c0 --- /dev/null +++ b/setup/projects/katrin/files/etc/apache2-kaas-docker/original/extra/httpd-info.conf @@ -0,0 +1,37 @@ +# +# Get information about the requests being processed by the server +# and the configuration of the server. +# +# Required modules: mod_status (for the server-status handler), +# mod_info (for the server-info handler) + +# +# Allow server status reports generated by mod_status, +# with the URL of http://servername/server-status +# Change the ".example.com" to match your domain to enable. + + + SetHandler server-status + Order deny,allow + Deny from all + Allow from .example.com + + +# +# ExtendedStatus controls whether Apache will generate "full" status +# information (ExtendedStatus On) or just basic information (ExtendedStatus +# Off) when the "server-status" handler is called. The default is Off. +# +#ExtendedStatus On + +# +# Allow remote server configuration reports, with the URL of +# http://servername/server-info (requires that mod_info.c be loaded). +# Change the ".example.com" to match your domain to enable. +# + + SetHandler server-info + Order deny,allow + Deny from all + Allow from .example.com + diff --git a/setup/projects/katrin/files/etc/apache2-kaas-docker/original/extra/httpd-languages.conf b/setup/projects/katrin/files/etc/apache2-kaas-docker/original/extra/httpd-languages.conf new file mode 100644 index 0000000..7f66461 --- /dev/null +++ b/setup/projects/katrin/files/etc/apache2-kaas-docker/original/extra/httpd-languages.conf @@ -0,0 +1,141 @@ +# +# Settings for hosting different languages. +# +# Required modules: mod_mime, mod_negotiation + +# DefaultLanguage and AddLanguage allows you to specify the language of +# a document. You can then use content negotiation to give a browser a +# file in a language the user can understand. +# +# Specify a default language. This means that all data +# going out without a specific language tag (see below) will +# be marked with this one. You probably do NOT want to set +# this unless you are sure it is correct for all cases. +# +# * It is generally better to not mark a page as +# * being a certain language than marking it with the wrong +# * language! +# +# DefaultLanguage nl +# +# Note 1: The suffix does not have to be the same as the language +# keyword --- those with documents in Polish (whose net-standard +# language code is pl) may wish to use "AddLanguage pl .po" to +# avoid the ambiguity with the common suffix for perl scripts. +# +# Note 2: The example entries below illustrate that in some cases +# the two character 'Language' abbreviation is not identical to +# the two character 'Country' code for its country, +# E.g. 'Danmark/dk' versus 'Danish/da'. +# +# Note 3: In the case of 'ltz' we violate the RFC by using a three char +# specifier. There is 'work in progress' to fix this and get +# the reference data for rfc1766 cleaned up. +# +# Catalan (ca) - Croatian (hr) - Czech (cs) - Danish (da) - Dutch (nl) +# English (en) - Esperanto (eo) - Estonian (et) - French (fr) - German (de) +# Greek-Modern (el) - Hebrew (he) - Italian (it) - Japanese (ja) +# Korean (ko) - Luxembourgeois* (ltz) - Norwegian Nynorsk (nn) +# Norwegian (no) - Polish (pl) - Portugese (pt) +# Brazilian Portuguese (pt-BR) - Russian (ru) - Swedish (sv) +# Turkish (tr) - Simplified Chinese (zh-CN) - Spanish (es) +# Traditional Chinese (zh-TW) +# +AddLanguage ca .ca +AddLanguage cs .cz .cs +AddLanguage da .dk +AddLanguage de .de +AddLanguage el .el +AddLanguage en .en +AddLanguage eo .eo +AddLanguage es .es +AddLanguage et .et +AddLanguage fr .fr +AddLanguage he .he +AddLanguage hr .hr +AddLanguage it .it +AddLanguage ja .ja +AddLanguage ko .ko +AddLanguage ltz .ltz +AddLanguage nl .nl +AddLanguage nn .nn +AddLanguage no .no +AddLanguage pl .po +AddLanguage pt .pt +AddLanguage pt-BR .pt-br +AddLanguage ru .ru +AddLanguage sv .sv +AddLanguage tr .tr +AddLanguage zh-CN .zh-cn +AddLanguage zh-TW .zh-tw + +# LanguagePriority allows you to give precedence to some languages +# in case of a tie during content negotiation. +# +# Just list the languages in decreasing order of preference. We have +# more or less alphabetized them here. You probably want to change this. +# +LanguagePriority en ca cs da de el eo es et fr he hr it ja ko ltz nl nn no pl pt pt-BR ru sv tr zh-CN zh-TW + +# +# ForceLanguagePriority allows you to serve a result page rather than +# MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE (Fallback) +# [in case no accepted languages matched the available variants] +# +ForceLanguagePriority Prefer Fallback + +# +# Commonly used filename extensions to character sets. You probably +# want to avoid clashes with the language extensions, unless you +# are good at carefully testing your setup after each change. +# See http://www.iana.org/assignments/character-sets for the +# official list of charset names and their respective RFCs. +# +AddCharset us-ascii.ascii .us-ascii +AddCharset ISO-8859-1 .iso8859-1 .latin1 +AddCharset ISO-8859-2 .iso8859-2 .latin2 .cen +AddCharset ISO-8859-3 .iso8859-3 .latin3 +AddCharset ISO-8859-4 .iso8859-4 .latin4 +AddCharset ISO-8859-5 .iso8859-5 .cyr .iso-ru +AddCharset ISO-8859-6 .iso8859-6 .arb .arabic +AddCharset ISO-8859-7 .iso8859-7 .grk .greek +AddCharset ISO-8859-8 .iso8859-8 .heb .hebrew +AddCharset ISO-8859-9 .iso8859-9 .latin5 .trk +AddCharset ISO-8859-10 .iso8859-10 .latin6 +AddCharset ISO-8859-13 .iso8859-13 +AddCharset ISO-8859-14 .iso8859-14 .latin8 +AddCharset ISO-8859-15 .iso8859-15 .latin9 +AddCharset ISO-8859-16 .iso8859-16 .latin10 +AddCharset ISO-2022-JP .iso2022-jp .jis +AddCharset ISO-2022-KR .iso2022-kr .kis +AddCharset ISO-2022-CN .iso2022-cn .cis +AddCharset Big5.Big5 .big5 .b5 +AddCharset cn-Big5 .cn-big5 +# For russian, more than one charset is used (depends on client, mostly): +AddCharset WINDOWS-1251 .cp-1251 .win-1251 +AddCharset CP866 .cp866 +AddCharset KOI8 .koi8 +AddCharset KOI8-E .koi8-e +AddCharset KOI8-r .koi8-r .koi8-ru +AddCharset KOI8-U .koi8-u +AddCharset KOI8-ru .koi8-uk .ua +AddCharset ISO-10646-UCS-2 .ucs2 +AddCharset ISO-10646-UCS-4 .ucs4 +AddCharset UTF-7 .utf7 +AddCharset UTF-8 .utf8 +AddCharset UTF-16 .utf16 +AddCharset UTF-16BE .utf16be +AddCharset UTF-16LE .utf16le +AddCharset UTF-32 .utf32 +AddCharset UTF-32BE .utf32be +AddCharset UTF-32LE .utf32le +AddCharset euc-cn .euc-cn +AddCharset euc-gb .euc-gb +AddCharset euc-jp .euc-jp +AddCharset euc-kr .euc-kr +#Not sure how euc-tw got in - IANA doesn't list it??? +AddCharset EUC-TW .euc-tw +AddCharset gb2312 .gb2312 .gb +AddCharset iso-10646-ucs-2 .ucs-2 .iso-10646-ucs-2 +AddCharset iso-10646-ucs-4 .ucs-4 .iso-10646-ucs-4 +AddCharset shift_jis .shift_jis .sjis diff --git a/setup/projects/katrin/files/etc/apache2-kaas-docker/original/extra/httpd-manual.conf b/setup/projects/katrin/files/etc/apache2-kaas-docker/original/extra/httpd-manual.conf new file mode 100644 index 0000000..fc12fb9 --- /dev/null +++ b/setup/projects/katrin/files/etc/apache2-kaas-docker/original/extra/httpd-manual.conf @@ -0,0 +1,31 @@ +# +# Provide access to the documentation on your server as +# http://yourserver.example.com/manual/ +# The documentation is always available at +# http://httpd.apache.org/docs/2.2/ +# +# Required modules: mod_alias, mod_setenvif, mod_negotiation +# + +AliasMatch ^/manual(?:/(?:de|en|es|fr|ja|ko|pt-br|ru|tr))?(/.*)?$ "/usr/local/apache2/manual$1" + + + Options Indexes + AllowOverride None + Order allow,deny + Allow from all + + + SetHandler type-map + + # .tr is text/troff in mime.types! + + ForceType "text/html; charset=utf-8" + + + SetEnvIf Request_URI ^/manual/(de|en|es|fr|ja|ko|pt-br|ru|tr)/ prefer-language=$1 + RedirectMatch 301 ^/manual(?:/(de|en|es|fr|ja|ko|pt-br|ru|tr)){2,}(/.*)?$ /manual/$1$2 + + LanguagePriority en de es fr ja ko pt-br ru tr + ForceLanguagePriority Prefer Fallback + diff --git a/setup/projects/katrin/files/etc/apache2-kaas-docker/original/extra/httpd-mpm.conf b/setup/projects/katrin/files/etc/apache2-kaas-docker/original/extra/httpd-mpm.conf new file mode 100644 index 0000000..8c44c60 --- /dev/null +++ b/setup/projects/katrin/files/etc/apache2-kaas-docker/original/extra/httpd-mpm.conf @@ -0,0 +1,110 @@ +# +# Server-Pool Management (MPM specific) +# + +# +# PidFile: The file in which the server should record its process +# identification number when it starts. +# +# Note that this is the default PidFile for most MPMs. +# + + PidFile "logs/httpd.pid" + + +# +# The accept serialization lock file MUST BE STORED ON A LOCAL DISK. +# + + +LockFile "logs/accept.lock" + + + +# +# Only one of the below sections will be relevant on your +# installed httpd. Use "apachectl -l" to find out the +# active mpm. +# + +# prefork MPM +# StartServers: number of server processes to start +# MinSpareServers: minimum number of server processes which are kept spare +# MaxSpareServers: maximum number of server processes which are kept spare +# MaxClients: maximum number of server processes allowed to start +# MaxRequestsPerChild: maximum number of requests a server process serves + + StartServers 5 + MinSpareServers 5 + MaxSpareServers 10 + MaxClients 150 + MaxRequestsPerChild 0 + + +# worker MPM +# StartServers: initial number of server processes to start +# MaxClients: maximum number of simultaneous client connections +# MinSpareThreads: minimum number of worker threads which are kept spare +# MaxSpareThreads: maximum number of worker threads which are kept spare +# ThreadsPerChild: constant number of worker threads in each server process +# MaxRequestsPerChild: maximum number of requests a server process serves + + StartServers 2 + MaxClients 150 + MinSpareThreads 25 + MaxSpareThreads 75 + ThreadsPerChild 25 + MaxRequestsPerChild 0 + + +# BeOS MPM +# StartThreads: how many threads do we initially spawn? +# MaxClients: max number of threads we can have (1 thread == 1 client) +# MaxRequestsPerThread: maximum number of requests each thread will process + + StartThreads 10 + MaxClients 50 + MaxRequestsPerThread 10000 + + +# NetWare MPM +# ThreadStackSize: Stack size allocated for each worker thread +# StartThreads: Number of worker threads launched at server startup +# MinSpareThreads: Minimum number of idle threads, to handle request spikes +# MaxSpareThreads: Maximum number of idle threads +# MaxThreads: Maximum number of worker threads alive at the same time +# MaxRequestsPerChild: Maximum number of requests a thread serves. It is +# recommended that the default value of 0 be set for this +# directive on NetWare. This will allow the thread to +# continue to service requests indefinitely. + + ThreadStackSize 65536 + StartThreads 250 + MinSpareThreads 25 + MaxSpareThreads 250 + MaxThreads 1000 + MaxRequestsPerChild 0 + MaxMemFree 100 + + +# OS/2 MPM +# StartServers: Number of server processes to maintain +# MinSpareThreads: Minimum number of idle threads per process, +# to handle request spikes +# MaxSpareThreads: Maximum number of idle threads per process +# MaxRequestsPerChild: Maximum number of connections per server process + + StartServers 2 + MinSpareThreads 5 + MaxSpareThreads 10 + MaxRequestsPerChild 0 + + +# WinNT MPM +# ThreadsPerChild: constant number of worker threads in the server process +# MaxRequestsPerChild: maximum number of requests a server process serves + + ThreadsPerChild 150 + MaxRequestsPerChild 0 + + diff --git a/setup/projects/katrin/files/etc/apache2-kaas-docker/original/extra/httpd-multilang-errordoc.conf b/setup/projects/katrin/files/etc/apache2-kaas-docker/original/extra/httpd-multilang-errordoc.conf new file mode 100644 index 0000000..8ff9a45 --- /dev/null +++ b/setup/projects/katrin/files/etc/apache2-kaas-docker/original/extra/httpd-multilang-errordoc.conf @@ -0,0 +1,52 @@ +# +# The configuration below implements multi-language error documents through +# content-negotiation. +# +# Required modules: mod_alias, mod_include, mod_negotiation +# +# We use Alias to redirect any /error/HTTP_.html.var response to +# our collection of by-error message multi-language collections. We use +# includes to substitute the appropriate text. +# +# You can modify the messages' appearance without changing any of the +# default HTTP_.html.var files by adding the line: +# +# Alias /error/include/ "/your/include/path/" +# +# which allows you to create your own set of files by starting with the +# /usr/local/apache2/error/include/ files and copying them to /your/include/path/, +# even on a per-VirtualHost basis. The default include files will display +# your Apache version number and your ServerAdmin email address regardless +# of the setting of ServerSignature. + +Alias /error/ "/usr/local/apache2/error/" + + + AllowOverride None + Options IncludesNoExec + AddOutputFilter Includes html + AddHandler type-map var + Order allow,deny + Allow from all + LanguagePriority en cs de es fr it ja ko nl pl pt-br ro sv tr + ForceLanguagePriority Prefer Fallback + + +ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var +ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var +ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var +ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var +ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var +ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var +ErrorDocument 410 /error/HTTP_GONE.html.var +ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var +ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var +ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var +ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var +ErrorDocument 415 /error/HTTP_UNSUPPORTED_MEDIA_TYPE.html.var +ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var +ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var +ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var +ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var +ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var + diff --git a/setup/projects/katrin/files/etc/apache2-kaas-docker/original/extra/httpd-ssl.conf b/setup/projects/katrin/files/etc/apache2-kaas-docker/original/extra/httpd-ssl.conf new file mode 100644 index 0000000..51f3784 --- /dev/null +++ b/setup/projects/katrin/files/etc/apache2-kaas-docker/original/extra/httpd-ssl.conf @@ -0,0 +1,269 @@ +# +# This is the Apache server configuration file providing SSL support. +# It contains the configuration directives to instruct the server how to +# serve pages over an https connection. For detailed information about these +# directives see +# +# Do NOT simply read the instructions in here without understanding +# what they do. They're here only as hints or reminders. If you are unsure +# consult the online docs. You have been warned. +# + +# +# Pseudo Random Number Generator (PRNG): +# Configure one or more sources to seed the PRNG of the SSL library. +# The seed data should be of good random quality. +# WARNING! On some platforms /dev/random blocks if not enough entropy +# is available. This means you then cannot use the /dev/random device +# because it would lead to very long connection times (as long as +# it requires to make more entropy available). But usually those +# platforms additionally provide a /dev/urandom device which doesn't +# block. So, if available, use this one instead. Read the mod_ssl User +# Manual for more details. +# +#SSLRandomSeed startup file:/dev/random 512 +#SSLRandomSeed startup file:/dev/urandom 512 +#SSLRandomSeed connect file:/dev/random 512 +#SSLRandomSeed connect file:/dev/urandom 512 + + +# +# When we also provide SSL we have to listen to the +# standard HTTP port (see above) and to the HTTPS port +# +# Note: Configurations that use IPv6 but not IPv4-mapped addresses need two +# Listen directives: "Listen [::]:443" and "Listen 0.0.0.0:443" +# +Listen 443 + +## +## SSL Global Context +## +## All SSL configuration in this context applies both to +## the main server and all SSL-enabled virtual hosts. +## + +# +# Some MIME-types for downloading Certificates and CRLs +# +AddType application/x-x509-ca-cert .crt +AddType application/x-pkcs7-crl .crl + +# SSL Cipher Suite: +# List the ciphers that the client is permitted to negotiate, +# and that httpd will negotiate as the client of a proxied server. +# See the OpenSSL documentation for a complete list of ciphers, and +# ensure these follow appropriate best practices for this deployment. +# httpd 2.2.30, 2.4.13 and later force-disable aNULL, eNULL and EXP ciphers, +# while OpenSSL disabled these by default in 0.9.8zf/1.0.0r/1.0.1m/1.0.2a. +SSLCipherSuite HIGH:MEDIUM:!MD5:!RC4 +SSLProxyCipherSuite HIGH:MEDIUM:!MD5:!RC4 + +# By the end of 2016, only TLSv1.2 ciphers should remain in use. +# Older ciphers should be disallowed as soon as possible, while the +# kRSA ciphers do not offer forward secrecy. These changes inhibit +# older clients (such as IE6 SP2 or IE8 on Windows XP, or other legacy +# non-browser tooling) from successfully connecting. +# +# To restrict mod_ssl to use only TLSv1.2 ciphers, and disable +# those protocols which do not support forward secrecy, replace +# the SSLCipherSuite and SSLProxyCipherSuite directives above with +# the following two directives, as soon as practical. +# SSLCipherSuite HIGH:MEDIUM:!SSLv3:!kRSA +# SSLProxyCipherSuite HIGH:MEDIUM:!SSLv3:!kRSA + +# User agents such as web browsers are not configured for the user's +# own preference of either security or performance, therefore this +# must be the prerogative of the web server administrator who manages +# cpu load versus confidentiality, so enforce the server's cipher order. +SSLHonorCipherOrder on + +# SSL Protocol support: +# List the protocol versions which clients are allowed to connect with. +# Disable SSLv2 and SSLv3 by default (cf. RFC 7525 3.1.1). TLSv1 (1.0) +# should be disabled as quickly as practical. By the end of 2016, only +# the TLSv1.2 protocol or later should remain in use. +SSLProtocol all -SSLv2 -SSLv3 +SSLProxyProtocol all -SSLv2 -SSLv3 + +# Pass Phrase Dialog: +# Configure the pass phrase gathering process. +# The filtering dialog program (`builtin' is a internal +# terminal dialog) has to provide the pass phrase on stdout. +SSLPassPhraseDialog builtin + +# Inter-Process Session Cache: +# Configure the SSL Session Cache: First the mechanism +# to use and second the expiring timeout (in seconds). +#SSLSessionCache "dbm:/usr/local/apache2/logs/ssl_scache" +SSLSessionCache "shmcb:/usr/local/apache2/logs/ssl_scache(512000)" +SSLSessionCacheTimeout 300 + +# Semaphore: +# Configure the path to the mutual exclusion semaphore the +# SSL engine uses internally for inter-process synchronization. +SSLMutex "file:/usr/local/apache2/logs/ssl_mutex" + +## +## SSL Virtual Host Context +## + + + +# General setup for the virtual host +DocumentRoot "/usr/local/apache2/htdocs" +ServerName www.example.com:443 +ServerAdmin you@example.com +ErrorLog "/usr/local/apache2/logs/error_log" +TransferLog "/usr/local/apache2/logs/access_log" + +# SSL Engine Switch: +# Enable/Disable SSL for this virtual host. +SSLEngine on + +# Server Certificate: +# Point SSLCertificateFile at a PEM encoded certificate. If +# the certificate is encrypted, then you will be prompted for a +# pass phrase. Note that a kill -HUP will prompt again. Keep +# in mind that if you have both an RSA and a DSA certificate you +# can configure both in parallel (to also allow the use of DSA +# ciphers, etc.) +# Some ECC cipher suites (http://www.ietf.org/rfc/rfc4492.txt) +# require an ECC certificate which can also be configured in +# parallel. +SSLCertificateFile "/usr/local/apache2/conf/server.crt" +#SSLCertificateFile "/usr/local/apache2/conf/server-dsa.crt" +#SSLCertificateFile "/usr/local/apache2/conf/server-ecc.crt" + +# Server Private Key: +# If the key is not combined with the certificate, use this +# directive to point at the key file. Keep in mind that if +# you've both a RSA and a DSA private key you can configure +# both in parallel (to also allow the use of DSA ciphers, etc.) +# ECC keys, when in use, can also be configured in parallel +SSLCertificateKeyFile "/usr/local/apache2/conf/server.key" +#SSLCertificateKeyFile "/usr/local/apache2/conf/server-dsa.key" +#SSLCertificateKeyFile "/usr/local/apache2/conf/server-ecc.key" + +# Server Certificate Chain: +# Point SSLCertificateChainFile at a file containing the +# concatenation of PEM encoded CA certificates which form the +# certificate chain for the server certificate. Alternatively +# the referenced file can be the same as SSLCertificateFile +# when the CA certificates are directly appended to the server +# certificate for convenience. +#SSLCertificateChainFile "/usr/local/apache2/conf/server-ca.crt" + +# Certificate Authority (CA): +# Set the CA certificate verification path where to find CA +# certificates for client authentication or alternatively one +# huge file containing all of them (file must be PEM encoded) +# Note: Inside SSLCACertificatePath you need hash symlinks +# to point to the certificate files. Use the provided +# Makefile to update the hash symlinks after changes. +#SSLCACertificatePath "/usr/local/apache2/conf/ssl.crt" +#SSLCACertificateFile "/usr/local/apache2/conf/ssl.crt/ca-bundle.crt" + +# Certificate Revocation Lists (CRL): +# Set the CA revocation path where to find CA CRLs for client +# authentication or alternatively one huge file containing all +# of them (file must be PEM encoded) +# Note: Inside SSLCARevocationPath you need hash symlinks +# to point to the certificate files. Use the provided +# Makefile to update the hash symlinks after changes. +#SSLCARevocationPath "/usr/local/apache2/conf/ssl.crl" +#SSLCARevocationFile "/usr/local/apache2/conf/ssl.crl/ca-bundle.crl" + +# Client Authentication (Type): +# Client certificate verification type and depth. Types are +# none, optional, require and optional_no_ca. Depth is a +# number which specifies how deeply to verify the certificate +# issuer chain before deciding the certificate is not valid. +#SSLVerifyClient require +#SSLVerifyDepth 10 + +# Access Control: +# With SSLRequire you can do per-directory access control based +# on arbitrary complex boolean expressions containing server +# variable checks and other lookup directives. The syntax is a +# mixture between C and Perl. See the mod_ssl documentation +# for more details. +# +#SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \ +# and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \ +# and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \ +# and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \ +# and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \ +# or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/ +# + +# SSL Engine Options: +# Set various options for the SSL engine. +# o FakeBasicAuth: +# Translate the client X.509 into a Basic Authorisation. This means that +# the standard Auth/DBMAuth methods can be used for access control. The +# user name is the `one line' version of the client's X.509 certificate. +# Note that no password is obtained from the user. Every entry in the user +# file needs this password: `xxj31ZMTZzkVA'. +# o ExportCertData: +# This exports two additional environment variables: SSL_CLIENT_CERT and +# SSL_SERVER_CERT. These contain the PEM-encoded certificates of the +# server (always existing) and the client (only existing when client +# authentication is used). This can be used to import the certificates +# into CGI scripts. +# o StdEnvVars: +# This exports the standard SSL/TLS related `SSL_*' environment variables. +# Per default this exportation is switched off for performance reasons, +# because the extraction step is an expensive operation and is usually +# useless for serving static content. So one usually enables the +# exportation for CGI and SSI requests only. +# o StrictRequire: +# This denies access when "SSLRequireSSL" or "SSLRequire" applied even +# under a "Satisfy any" situation, i.e. when it applies access is denied +# and no other module can change it. +# o OptRenegotiate: +# This enables optimized SSL connection renegotiation handling when SSL +# directives are used in per-directory context. +#SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire + + SSLOptions +StdEnvVars + + + SSLOptions +StdEnvVars + + +# SSL Protocol Adjustments: +# The safe and default but still SSL/TLS standard compliant shutdown +# approach is that mod_ssl sends the close notify alert but doesn't wait for +# the close notify alert from client. When you need a different shutdown +# approach you can use one of the following variables: +# o ssl-unclean-shutdown: +# This forces an unclean shutdown when the connection is closed, i.e. no +# SSL close notify alert is sent or allowed to be received. This violates +# the SSL/TLS standard but is needed for some brain-dead browsers. Use +# this when you receive I/O errors because of the standard approach where +# mod_ssl sends the close notify alert. +# o ssl-accurate-shutdown: +# This forces an accurate shutdown when the connection is closed, i.e. a +# SSL close notify alert is send and mod_ssl waits for the close notify +# alert of the client. This is 100% SSL/TLS standard compliant, but in +# practice often causes hanging connections with brain-dead browsers. Use +# this only for browsers where you know that their SSL implementation +# works correctly. +# Notice: Most problems of broken clients are also related to the HTTP +# keep-alive facility, so you usually additionally want to disable +# keep-alive for those clients, too. Use variable "nokeepalive" for this. +# Similarly, one has to force some clients to use HTTP/1.0 to workaround +# their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and +# "force-response-1.0" for this. +BrowserMatch "MSIE [2-5]" \ + nokeepalive ssl-unclean-shutdown \ + downgrade-1.0 force-response-1.0 + +# Per-Server Logging: +# The home of a custom SSL log file. Use this when you want a +# compact non-error SSL logfile on a virtual host basis. +CustomLog "/usr/local/apache2/logs/ssl_request_log" \ + "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b" + + diff --git a/setup/projects/katrin/files/etc/apache2-kaas-docker/original/extra/httpd-userdir.conf b/setup/projects/katrin/files/etc/apache2-kaas-docker/original/extra/httpd-userdir.conf new file mode 100644 index 0000000..567bd6d --- /dev/null +++ b/setup/projects/katrin/files/etc/apache2-kaas-docker/original/extra/httpd-userdir.conf @@ -0,0 +1,28 @@ +# Settings for user home directories +# +# Required module: mod_userdir + +# +# UserDir: The name of the directory that is appended onto a user's home +# directory if a ~user request is received. Note that you must also set +# the default access control for these directories, as in the example below. +# +UserDir public_html + +# +# Control access to UserDir directories. The following is an example +# for a site where these directories are restricted to read-only. +# + + AllowOverride FileInfo AuthConfig Limit Indexes + Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec + + Order allow,deny + Allow from all + + + Order deny,allow + Deny from all + + + diff --git a/setup/projects/katrin/files/etc/apache2-kaas-docker/original/extra/httpd-vhosts.conf b/setup/projects/katrin/files/etc/apache2-kaas-docker/original/extra/httpd-vhosts.conf new file mode 100644 index 0000000..12995e2 --- /dev/null +++ b/setup/projects/katrin/files/etc/apache2-kaas-docker/original/extra/httpd-vhosts.conf @@ -0,0 +1,45 @@ +# +# Virtual Hosts +# +# If you want to maintain multiple domains/hostnames on your +# machine you can setup VirtualHost containers for them. Most configurations +# use only name-based virtual hosts so the server doesn't need to worry about +# IP addresses. This is indicated by the asterisks in the directives below. +# +# Please see the documentation at +# +# for further details before you try to setup virtual hosts. +# +# You may use the command line option '-S' to verify your virtual host +# configuration. + +# +# Use name-based virtual hosting. +# +NameVirtualHost *:80 + +# +# VirtualHost example: +# Almost any Apache directive may go into a VirtualHost container. +# The first VirtualHost section is used for all requests that do not +# match a ServerName or ServerAlias in any block. +# + + ServerAdmin webmaster@dummy-host.example.com + DocumentRoot "/usr/local/apache2/docs/dummy-host.example.com" + ServerName dummy-host.example.com + ServerAlias www.dummy-host.example.com + ErrorLog "logs/dummy-host.example.com-error_log" + CustomLog "logs/dummy-host.example.com-access_log" common + + + + ServerAdmin webmaster@dummy-host2.example.com + DocumentRoot "/usr/local/apache2/docs/dummy-host2.example.com" + ServerName dummy-host2.example.com + ErrorLog "logs/dummy-host2.example.com-error_log" + CustomLog "logs/dummy-host2.example.com-access_log" common + + + + diff --git a/setup/projects/katrin/files/etc/apache2-kaas-docker/original/httpd.conf b/setup/projects/katrin/files/etc/apache2-kaas-docker/original/httpd.conf new file mode 100644 index 0000000..8724924 --- /dev/null +++ b/setup/projects/katrin/files/etc/apache2-kaas-docker/original/httpd.conf @@ -0,0 +1,494 @@ +# +# This is the main Apache HTTP server configuration file. It contains the +# configuration directives that give the server its instructions. +# See for detailed information. +# In particular, see +# +# for a discussion of each configuration directive. +# +# Do NOT simply read the instructions in here without understanding +# what they do. They're here only as hints or reminders. If you are unsure +# consult the online docs. You have been warned. +# +# Configuration and logfile names: If the filenames you specify for many +# of the server's control files begin with "/" (or "drive:/" for Win32), the +# server will use that explicit path. If the filenames do *not* begin +# with "/", the value of ServerRoot is prepended -- so 'log/access_log' +# with ServerRoot set to '/www' will be interpreted by the +# server as '/www/log/access_log', where as '/log/access_log' will be +# interpreted as '/log/access_log'. + +# +# ServerRoot: The top of the directory tree under which the server's +# configuration, error, and log files are kept. +# +# Do not add a slash at the end of the directory path. If you point +# ServerRoot at a non-local disk, be sure to point the LockFile directive +# at a local disk. If you wish to share the same ServerRoot for multiple +# httpd daemons, you will need to change at least LockFile and PidFile. +# +ServerRoot "/usr/local/apache2" + +# +# Listen: Allows you to bind Apache to specific IP addresses and/or +# ports, instead of the default. See also the +# directive. +# +# Change this to Listen on specific IP addresses as shown below to +# prevent Apache from glomming onto all bound IP addresses. +# +#Listen 12.34.56.78:80 +Listen 8080 + +# +# Dynamic Shared Object (DSO) Support +# +# To be able to use the functionality of a module which was built as a DSO you +# have to place corresponding `LoadModule' lines at this location so the +# directives contained in it are actually available _before_ they are used. +# Statically compiled modules (those listed by `httpd -l') do not need +# to be loaded here. +# +# Example: +# LoadModule foo_module modules/mod_foo.so +# +LoadModule authn_file_module modules/mod_authn_file.so +LoadModule authn_dbm_module modules/mod_authn_dbm.so +LoadModule authn_anon_module modules/mod_authn_anon.so +LoadModule authn_dbd_module modules/mod_authn_dbd.so +LoadModule authn_default_module modules/mod_authn_default.so +LoadModule authn_alias_module modules/mod_authn_alias.so +LoadModule authz_host_module modules/mod_authz_host.so +LoadModule authz_groupfile_module modules/mod_authz_groupfile.so +LoadModule authz_user_module modules/mod_authz_user.so +LoadModule authz_dbm_module modules/mod_authz_dbm.so +LoadModule authz_owner_module modules/mod_authz_owner.so +LoadModule authnz_ldap_module modules/mod_authnz_ldap.so +LoadModule authz_default_module modules/mod_authz_default.so +LoadModule auth_basic_module modules/mod_auth_basic.so +LoadModule auth_digest_module modules/mod_auth_digest.so +LoadModule file_cache_module modules/mod_file_cache.so +LoadModule cache_module modules/mod_cache.so +LoadModule disk_cache_module modules/mod_disk_cache.so +LoadModule mem_cache_module modules/mod_mem_cache.so +LoadModule dbd_module modules/mod_dbd.so +LoadModule dumpio_module modules/mod_dumpio.so +LoadModule reqtimeout_module modules/mod_reqtimeout.so +LoadModule ext_filter_module modules/mod_ext_filter.so +LoadModule include_module modules/mod_include.so +LoadModule filter_module modules/mod_filter.so +LoadModule substitute_module modules/mod_substitute.so +LoadModule charset_lite_module modules/mod_charset_lite.so +LoadModule deflate_module modules/mod_deflate.so +LoadModule ldap_module modules/mod_ldap.so +LoadModule log_config_module modules/mod_log_config.so +LoadModule log_forensic_module modules/mod_log_forensic.so +LoadModule logio_module modules/mod_logio.so +LoadModule env_module modules/mod_env.so +LoadModule mime_magic_module modules/mod_mime_magic.so +LoadModule cern_meta_module modules/mod_cern_meta.so +LoadModule expires_module modules/mod_expires.so +LoadModule headers_module modules/mod_headers.so +LoadModule ident_module modules/mod_ident.so +LoadModule usertrack_module modules/mod_usertrack.so +LoadModule unique_id_module modules/mod_unique_id.so +LoadModule setenvif_module modules/mod_setenvif.so +LoadModule version_module modules/mod_version.so +LoadModule proxy_module modules/mod_proxy.so +LoadModule proxy_connect_module modules/mod_proxy_connect.so +LoadModule proxy_ftp_module modules/mod_proxy_ftp.so +LoadModule proxy_http_module modules/mod_proxy_http.so +LoadModule proxy_scgi_module modules/mod_proxy_scgi.so +LoadModule proxy_ajp_module modules/mod_proxy_ajp.so +LoadModule proxy_balancer_module modules/mod_proxy_balancer.so +LoadModule ssl_module modules/mod_ssl.so +LoadModule mime_module modules/mod_mime.so +LoadModule dav_module modules/mod_dav.so +LoadModule status_module modules/mod_status.so +LoadModule autoindex_module modules/mod_autoindex.so +LoadModule asis_module modules/mod_asis.so +LoadModule info_module modules/mod_info.so +LoadModule cgi_module modules/mod_cgi.so +LoadModule dav_fs_module modules/mod_dav_fs.so +LoadModule dav_lock_module modules/mod_dav_lock.so +LoadModule vhost_alias_module modules/mod_vhost_alias.so +LoadModule negotiation_module modules/mod_negotiation.so +LoadModule dir_module modules/mod_dir.so +LoadModule imagemap_module modules/mod_imagemap.so +LoadModule actions_module modules/mod_actions.so +LoadModule speling_module modules/mod_speling.so +LoadModule userdir_module modules/mod_userdir.so +LoadModule alias_module modules/mod_alias.so +LoadModule rewrite_module modules/mod_rewrite.so + + + +# +# If you wish httpd to run as a different user or group, you must run +# httpd as root initially and it will switch. +# +# User/Group: The name (or #number) of the user/group to run httpd as. +# It is usually good practice to create a dedicated user and group for +# running httpd, as with most system services. +# +User daemon +Group daemon + + + + +# 'Main' server configuration +# +# The directives in this section set up the values used by the 'main' +# server, which responds to any requests that aren't handled by a +# definition. These values also provide defaults for +# any containers you may define later in the file. +# +# All of these directives may appear inside containers, +# in which case these default settings will be overridden for the +# virtual host being defined. +# + +# +# ServerAdmin: Your address, where problems with the server should be +# e-mailed. This address appears on some server-generated pages, such +# as error documents. e.g. admin@your-domain.com +# +ServerAdmin you@example.com + +# +# ServerName gives the name and port that the server uses to identify itself. +# This can often be determined automatically, but we recommend you specify +# it explicitly to prevent problems during startup. +# +# If your host doesn't have a registered DNS name, enter its IP address here. +# +#ServerName www.example.com:80 + +# +# DocumentRoot: The directory out of which you will serve your +# documents. By default, all requests are taken from this directory, but +# symbolic links and aliases may be used to point to other locations. +# +DocumentRoot "/usr/local/apache2/htdocs" + +# +# Each directory to which Apache has access can be configured with respect +# to which services and features are allowed and/or disabled in that +# directory (and its subdirectories). +# +# First, we configure the "default" to be a very restrictive set of +# features. +# + + Options FollowSymLinks + AllowOverride None + Order deny,allow + Deny from all + + +# +# Note that from this point forward you must specifically allow +# particular features to be enabled - so if something's not working as +# you might expect, make sure that you have specifically enabled it +# below. +# + +# +# This should be changed to whatever you set DocumentRoot to. +# + + # + # Possible values for the Options directive are "None", "All", + # or any combination of: + # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews + # + # Note that "MultiViews" must be named *explicitly* --- "Options All" + # doesn't give it to you. + # + # The Options directive is both complicated and important. Please see + # http://httpd.apache.org/docs/2.2/mod/core.html#options + # for more information. + # + Options Indexes FollowSymLinks + + # + # AllowOverride controls what directives may be placed in .htaccess files. + # It can be "All", "None", or any combination of the keywords: + # Options FileInfo AuthConfig Limit + # + AllowOverride None + + # + # Controls who can get stuff from this server. + # + Order allow,deny + Allow from all + + + +# +# DirectoryIndex: sets the file that Apache will serve if a directory +# is requested. +# + + DirectoryIndex index.html + + +# +# The following lines prevent .htaccess and .htpasswd files from being +# viewed by Web clients. +# + + Order allow,deny + Deny from all + Satisfy All + + +# +# ErrorLog: The location of the error log file. +# If you do not specify an ErrorLog directive within a +# container, error messages relating to that virtual host will be +# logged here. If you *do* define an error logfile for a +# container, that host's errors will be logged there and not here. +# +ErrorLog "logs/error_log" + +# +# LogLevel: Control the number of messages logged to the error_log. +# Possible values include: debug, info, notice, warn, error, crit, +# alert, emerg. +# +LogLevel warn + + + # + # The following directives define some format nicknames for use with + # a CustomLog directive (see below). + # + LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined + LogFormat "%h %l %u %t \"%r\" %>s %b" common + + + # You need to enable mod_logio.c to use %I and %O + LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio + + + # + # The location and format of the access logfile (Common Logfile Format). + # If you do not define any access logfiles within a + # container, they will be logged here. Contrariwise, if you *do* + # define per- access logfiles, transactions will be + # logged therein and *not* in this file. + # + CustomLog "logs/access_log" common + + # + # If you prefer a logfile with access, agent, and referer information + # (Combined Logfile Format) you can use the following directive. + # + #CustomLog "logs/access_log" combined + + + + # + # Redirect: Allows you to tell clients about documents that used to + # exist in your server's namespace, but do not anymore. The client + # will make a new request for the document at its new location. + # Example: + # Redirect permanent /foo http://www.example.com/bar + + # + # Alias: Maps web paths into filesystem paths and is used to + # access content that does not live under the DocumentRoot. + # Example: + # Alias /webpath /full/filesystem/path + # + # If you include a trailing / on /webpath then the server will + # require it to be present in the URL. You will also likely + # need to provide a section to allow access to + # the filesystem path. + + # + # ScriptAlias: This controls which directories contain server scripts. + # ScriptAliases are essentially the same as Aliases, except that + # documents in the target directory are treated as applications and + # run by the server when requested rather than as documents sent to the + # client. The same rules about trailing "/" apply to ScriptAlias + # directives as to Alias. + # + ScriptAlias /cgi-bin/ "/usr/local/apache2/cgi-bin/" + + + + + # + # ScriptSock: On threaded servers, designate the path to the UNIX + # socket used to communicate with the CGI daemon of mod_cgid. + # + #Scriptsock logs/cgisock + + +# +# "/usr/local/apache2/cgi-bin" should be changed to whatever your ScriptAliased +# CGI directory exists, if you have that configured. +# + + AllowOverride None + Options None + Order allow,deny + Allow from all + + +# +# DefaultType: the default MIME type the server will use for a document +# if it cannot otherwise determine one, such as from filename extensions. +# If your server contains mostly text or HTML documents, "text/plain" is +# a good value. If most of your content is binary, such as applications +# or images, you may want to use "application/octet-stream" instead to +# keep browsers from trying to display binary files as though they are +# text. +# +DefaultType text/plain + + + # + # Avoid passing HTTP_PROXY environment to CGI's on this or any proxied + # backend servers which have lingering "httpoxy" defects. + # 'Proxy' request header is undefined by the IETF, not listed by IANA + # + RequestHeader unset Proxy early + + + + # + # TypesConfig points to the file containing the list of mappings from + # filename extension to MIME-type. + # + TypesConfig conf/mime.types + + # + # AddType allows you to add to or override the MIME configuration + # file specified in TypesConfig for specific file types. + # + #AddType application/x-gzip .tgz + # + # AddEncoding allows you to have certain browsers uncompress + # information on the fly. Note: Not all browsers support this. + # + #AddEncoding x-compress .Z + #AddEncoding x-gzip .gz .tgz + # + # If the AddEncoding directives above are commented-out, then you + # probably should define those extensions to indicate media types: + # + AddType application/x-compress .Z + AddType application/x-gzip .gz .tgz + + # + # AddHandler allows you to map certain file extensions to "handlers": + # actions unrelated to filetype. These can be either built into the server + # or added with the Action directive (see below) + # + # To use CGI scripts outside of ScriptAliased directories: + # (You will also need to add "ExecCGI" to the "Options" directive.) + # + #AddHandler cgi-script .cgi + + # For type maps (negotiated resources): + #AddHandler type-map var + + # + # Filters allow you to process content before it is sent to the client. + # + # To parse .shtml files for server-side includes (SSI): + # (You will also need to add "Includes" to the "Options" directive.) + # + #AddType text/html .shtml + #AddOutputFilter INCLUDES .shtml + + +# +# The mod_mime_magic module allows the server to use various hints from the +# contents of the file itself to determine its type. The MIMEMagicFile +# directive tells the module where the hint definitions are located. +# +#MIMEMagicFile conf/magic + +# +# Customizable error responses come in three flavors: +# 1) plain text 2) local redirects 3) external redirects +# +# Some examples: +#ErrorDocument 500 "The server made a boo boo." +#ErrorDocument 404 /missing.html +#ErrorDocument 404 "/cgi-bin/missing_handler.pl" +#ErrorDocument 402 http://www.example.com/subscription_info.html +# + +# +# MaxRanges: Maximum number of Ranges in a request before +# returning the entire resource, or one of the special +# values 'default', 'none' or 'unlimited'. +# Default setting is to accept 200 Ranges. +#MaxRanges unlimited + +# +# EnableMMAP and EnableSendfile: On systems that support it, +# memory-mapping or the sendfile syscall is used to deliver +# files. This usually improves server performance, but must +# be turned off when serving from networked-mounted +# filesystems or if support for these functions is otherwise +# broken on your system. +# +#EnableMMAP off +#EnableSendfile off + +# Supplemental configuration +# +# The configuration files in the conf/extra/ directory can be +# included to add extra features or to modify the default configuration of +# the server, or you may simply copy their contents here and change as +# necessary. + +# Server-pool management (MPM specific) +#Include conf/extra/httpd-mpm.conf + +# Multi-language error messages +#Include conf/extra/httpd-multilang-errordoc.conf + +# Fancy directory listings +#Include conf/extra/httpd-autoindex.conf + +# Language settings +#Include conf/extra/httpd-languages.conf + +# User home directories +#Include conf/extra/httpd-userdir.conf + +# Real-time info on requests and configuration +#Include conf/extra/httpd-info.conf + +# Virtual hosts +#Include conf/extra/httpd-vhosts.conf + +# Local access to the Apache HTTP Server Manual +#Include conf/extra/httpd-manual.conf + +# Distributed authoring and versioning (WebDAV) +#Include conf/extra/httpd-dav.conf + +# Various default settings +#Include conf/extra/httpd-default.conf + +# Secure (SSL/TLS) connections +#Include conf/extra/httpd-ssl.conf +# +# Note: The following must must be present to support +# starting without SSL on platforms with no /dev/random equivalent +# but a statically compiled-in mod_ssl. +# + +SSLRandomSeed startup builtin +SSLRandomSeed connect builtin + diff --git a/setup/projects/katrin/files/etc/apache2-kaas/conf.d/README b/setup/projects/katrin/files/etc/apache2-kaas/conf.d/README deleted file mode 100644 index f5e9661..0000000 --- a/setup/projects/katrin/files/etc/apache2-kaas/conf.d/README +++ /dev/null @@ -1,9 +0,0 @@ - -This directory holds configuration files for the Apache HTTP Server; -any files in this directory which have the ".conf" extension will be -processed as httpd configuration files. The directory is used in -addition to the directory /etc/httpd/conf.modules.d/, which contains -configuration files necessary to load modules. - -Files are processed in alphabetical order. - diff --git a/setup/projects/katrin/files/etc/apache2-kaas/conf.d/autoindex.conf b/setup/projects/katrin/files/etc/apache2-kaas/conf.d/autoindex.conf deleted file mode 100644 index 55f658e..0000000 --- a/setup/projects/katrin/files/etc/apache2-kaas/conf.d/autoindex.conf +++ /dev/null @@ -1,94 +0,0 @@ -# -# Directives controlling the display of server-generated directory listings. -# -# Required modules: mod_authz_core, mod_authz_host, -# mod_autoindex, mod_alias -# -# To see the listing of a directory, the Options directive for the -# directory must include "Indexes", and the directory must not contain -# a file matching those listed in the DirectoryIndex directive. -# - -# -# IndexOptions: Controls the appearance of server-generated directory -# listings. -# -IndexOptions FancyIndexing HTMLTable VersionSort - -# We include the /icons/ alias for FancyIndexed directory listings. If -# you do not use FancyIndexing, you may comment this out. -# -Alias /icons/ "/opt/rh/httpd24/root/usr/share/httpd/icons/" - - - Options Indexes MultiViews FollowSymlinks - AllowOverride None - Require all granted - - -# -# AddIcon* directives tell the server which icon to show for different -# files or filename extensions. These are only displayed for -# FancyIndexed directories. -# -AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip - -AddIconByType (TXT,/icons/text.gif) text/* -AddIconByType (IMG,/icons/image2.gif) image/* -AddIconByType (SND,/icons/sound2.gif) audio/* -AddIconByType (VID,/icons/movie.gif) video/* - -AddIcon /icons/binary.gif .bin .exe -AddIcon /icons/binhex.gif .hqx -AddIcon /icons/tar.gif .tar -AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv -AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip -AddIcon /icons/a.gif .ps .ai .eps -AddIcon /icons/layout.gif .html .shtml .htm .pdf -AddIcon /icons/text.gif .txt -AddIcon /icons/c.gif .c -AddIcon /icons/p.gif .pl .py -AddIcon /icons/f.gif .for -AddIcon /icons/dvi.gif .dvi -AddIcon /icons/uuencoded.gif .uu -AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl -AddIcon /icons/tex.gif .tex -AddIcon /icons/bomb.gif /core -AddIcon /icons/bomb.gif */core.* - -AddIcon /icons/back.gif .. -AddIcon /icons/hand.right.gif README -AddIcon /icons/folder.gif ^^DIRECTORY^^ -AddIcon /icons/blank.gif ^^BLANKICON^^ - -# -# DefaultIcon is which icon to show for files which do not have an icon -# explicitly set. -# -DefaultIcon /icons/unknown.gif - -# -# AddDescription allows you to place a short description after a file in -# server-generated indexes. These are only displayed for FancyIndexed -# directories. -# Format: AddDescription "description" filename -# -#AddDescription "GZIP compressed document" .gz -#AddDescription "tar archive" .tar -#AddDescription "GZIP compressed tar archive" .tgz - -# -# ReadmeName is the name of the README file the server will look for by -# default, and append to directory listings. -# -# HeaderName is the name of a file which should be prepended to -# directory indexes. -ReadmeName README.html -HeaderName HEADER.html - -# -# IndexIgnore is a set of filenames which directory indexing should ignore -# and not include in the listing. Shell-style wildcarding is permitted. -# -IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t - diff --git a/setup/projects/katrin/files/etc/apache2-kaas/conf.d/ssl.conf b/setup/projects/katrin/files/etc/apache2-kaas/conf.d/ssl.conf deleted file mode 100644 index a70324b..0000000 --- a/setup/projects/katrin/files/etc/apache2-kaas/conf.d/ssl.conf +++ /dev/null @@ -1,217 +0,0 @@ -# -# When we also provide SSL we have to listen to the -# the HTTPS port in addition. -# -Listen 0.0.0.0:8443 https - -## -## SSL Global Context -## -## All SSL configuration in this context applies both to -## the main server and all SSL-enabled virtual hosts. -## - -# Pass Phrase Dialog: -# Configure the pass phrase gathering process. -# The filtering dialog program (`builtin' is a internal -# terminal dialog) has to provide the pass phrase on stdout. -SSLPassPhraseDialog builtin - -# Inter-Process Session Cache: -# Configure the SSL Session Cache: First the mechanism -# to use and second the expiring timeout (in seconds). -SSLSessionCache shmcb:/opt/rh/httpd24/root/var/run/httpd/sslcache(512000) -SSLSessionCacheTimeout 300 - -# Pseudo Random Number Generator (PRNG): -# Configure one or more sources to seed the PRNG of the -# SSL library. The seed data should be of good random quality. -# WARNING! On some platforms /dev/random blocks if not enough entropy -# is available. This means you then cannot use the /dev/random device -# because it would lead to very long connection times (as long as -# it requires to make more entropy available). But usually those -# platforms additionally provide a /dev/urandom device which doesn't -# block. So, if available, use this one instead. Read the mod_ssl User -# Manual for more details. -SSLRandomSeed startup file:/dev/urandom 256 -SSLRandomSeed connect builtin -#SSLRandomSeed startup file:/dev/random 512 -#SSLRandomSeed connect file:/dev/random 512 -#SSLRandomSeed connect file:/dev/urandom 512 - -# -# Use "SSLCryptoDevice" to enable any supported hardware -# accelerators. Use "openssl engine -v" to list supported -# engine names. NOTE: If you enable an accelerator and the -# server does not start, consult the error logs and ensure -# your accelerator is functioning properly. -# -SSLCryptoDevice builtin -#SSLCryptoDevice ubsec - -## -## SSL Virtual Host Context -## - - - -# General setup for the virtual host, inherited from global configuration -#DocumentRoot "/var/www/html" -#ServerName www.example.com:8443 - -# Use separate log files for the SSL virtual host; note that LogLevel -# is not inherited from httpd.conf. -ErrorLog |/usr/bin/cat -TransferLog |/usr/bin/cat -LogLevel warn - -# SSL Engine Switch: -# Enable/Disable SSL for this virtual host. -SSLEngine on - -# SSL Protocol support: -# List the enable protocol levels with which clients will be able to -# connect. Disable SSLv2 access by default: -SSLProtocol all -SSLv2 - -# SSL Cipher Suite: -# List the ciphers that the client is permitted to negotiate. -# See the mod_ssl documentation for a complete list. -SSLCipherSuite HIGH:MEDIUM:!aNULL:!MD5 - -# Speed-optimized SSL Cipher configuration: -# If speed is your main concern (on busy HTTPS servers e.g.), -# you might want to force clients to specific, performance -# optimized ciphers. In this case, prepend those ciphers -# to the SSLCipherSuite list, and enable SSLHonorCipherOrder. -# Caveat: by giving precedence to RC4-SHA and AES128-SHA -# (as in the example below), most connections will no longer -# have perfect forward secrecy - if the server's key is -# compromised, captures of past or future traffic must be -# considered compromised, too. -#SSLCipherSuite RC4-SHA:AES128-SHA:HIGH:MEDIUM:!aNULL:!MD5 -#SSLHonorCipherOrder on - -# Server Certificate: -# Point SSLCertificateFile at a PEM encoded certificate. If -# the certificate is encrypted, then you will be prompted for a -# pass phrase. Note that a kill -HUP will prompt again. A new -# certificate can be generated using the genkey(1) command. -SSLCertificateFile /etc/pki/tls/certs/localhost.crt - -# Server Private Key: -# If the key is not combined with the certificate, use this -# directive to point at the key file. Keep in mind that if -# you've both a RSA and a DSA private key you can configure -# both in parallel (to also allow the use of DSA ciphers, etc.) -SSLCertificateKeyFile /etc/pki/tls/private/localhost.key - -# Server Certificate Chain: -# Point SSLCertificateChainFile at a file containing the -# concatenation of PEM encoded CA certificates which form the -# certificate chain for the server certificate. Alternatively -# the referenced file can be the same as SSLCertificateFile -# when the CA certificates are directly appended to the server -# certificate for convinience. -#SSLCertificateChainFile /etc/pki/tls/certs/server-chain.crt - -# Certificate Authority (CA): -# Set the CA certificate verification path where to find CA -# certificates for client authentication or alternatively one -# huge file containing all of them (file must be PEM encoded) -#SSLCACertificateFile /etc/pki/tls/certs/ca-bundle.crt - -# Client Authentication (Type): -# Client certificate verification type and depth. Types are -# none, optional, require and optional_no_ca. Depth is a -# number which specifies how deeply to verify the certificate -# issuer chain before deciding the certificate is not valid. -#SSLVerifyClient require -#SSLVerifyDepth 10 - -# Access Control: -# With SSLRequire you can do per-directory access control based -# on arbitrary complex boolean expressions containing server -# variable checks and other lookup directives. The syntax is a -# mixture between C and Perl. See the mod_ssl documentation -# for more details. -# -#SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \ -# and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \ -# and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \ -# and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \ -# and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \ -# or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/ -# - -# SSL Engine Options: -# Set various options for the SSL engine. -# o FakeBasicAuth: -# Translate the client X.509 into a Basic Authorisation. This means that -# the standard Auth/DBMAuth methods can be used for access control. The -# user name is the `one line' version of the client's X.509 certificate. -# Note that no password is obtained from the user. Every entry in the user -# file needs this password: `xxj31ZMTZzkVA'. -# o ExportCertData: -# This exports two additional environment variables: SSL_CLIENT_CERT and -# SSL_SERVER_CERT. These contain the PEM-encoded certificates of the -# server (always existing) and the client (only existing when client -# authentication is used). This can be used to import the certificates -# into CGI scripts. -# o StdEnvVars: -# This exports the standard SSL/TLS related `SSL_*' environment variables. -# Per default this exportation is switched off for performance reasons, -# because the extraction step is an expensive operation and is usually -# useless for serving static content. So one usually enables the -# exportation for CGI and SSI requests only. -# o StrictRequire: -# This denies access when "SSLRequireSSL" or "SSLRequire" applied even -# under a "Satisfy any" situation, i.e. when it applies access is denied -# and no other module can change it. -# o OptRenegotiate: -# This enables optimized SSL connection renegotiation handling when SSL -# directives are used in per-directory context. -#SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire - - SSLOptions +StdEnvVars - - - SSLOptions +StdEnvVars - - -# SSL Protocol Adjustments: -# The safe and default but still SSL/TLS standard compliant shutdown -# approach is that mod_ssl sends the close notify alert but doesn't wait for -# the close notify alert from client. When you need a different shutdown -# approach you can use one of the following variables: -# o ssl-unclean-shutdown: -# This forces an unclean shutdown when the connection is closed, i.e. no -# SSL close notify alert is send or allowed to received. This violates -# the SSL/TLS standard but is needed for some brain-dead browsers. Use -# this when you receive I/O errors because of the standard approach where -# mod_ssl sends the close notify alert. -# o ssl-accurate-shutdown: -# This forces an accurate shutdown when the connection is closed, i.e. a -# SSL close notify alert is send and mod_ssl waits for the close notify -# alert of the client. This is 100% SSL/TLS standard compliant, but in -# practice often causes hanging connections with brain-dead browsers. Use -# this only for browsers where you know that their SSL implementation -# works correctly. -# Notice: Most problems of broken clients are also related to the HTTP -# keep-alive facility, so you usually additionally want to disable -# keep-alive for those clients, too. Use variable "nokeepalive" for this. -# Similarly, one has to force some clients to use HTTP/1.0 to workaround -# their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and -# "force-response-1.0" for this. -BrowserMatch "MSIE [2-5]" \ - nokeepalive ssl-unclean-shutdown \ - downgrade-1.0 force-response-1.0 - -# Per-Server Logging: -# The home of a custom SSL log file. Use this when you want a -# compact non-error SSL logfile on a virtual host basis. -CustomLog |/usr/bin/cat \ - "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b" - - - diff --git a/setup/projects/katrin/files/etc/apache2-kaas/conf.d/userdir.conf b/setup/projects/katrin/files/etc/apache2-kaas/conf.d/userdir.conf deleted file mode 100644 index b5d7a49..0000000 --- a/setup/projects/katrin/files/etc/apache2-kaas/conf.d/userdir.conf +++ /dev/null @@ -1,36 +0,0 @@ -# -# UserDir: The name of the directory that is appended onto a user's home -# directory if a ~user request is received. -# -# The path to the end user account 'public_html' directory must be -# accessible to the webserver userid. This usually means that ~userid -# must have permissions of 711, ~userid/public_html must have permissions -# of 755, and documents contained therein must be world-readable. -# Otherwise, the client will only receive a "403 Forbidden" message. -# - - # - # UserDir is disabled by default since it can confirm the presence - # of a username on the system (depending on home directory - # permissions). - # - UserDir disabled - - # - # To enable requests to /~user/ to serve the user's public_html - # directory, remove the "UserDir disabled" line above, and uncomment - # the following line instead: - # - #UserDir public_html - - -# -# Control access to UserDir directories. The following is an example -# for a site where these directories are restricted to read-only. -# - - AllowOverride FileInfo AuthConfig Limit Indexes - Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec - Require method GET POST OPTIONS - - diff --git a/setup/projects/katrin/files/etc/apache2-kaas/conf.d/welcome.conf b/setup/projects/katrin/files/etc/apache2-kaas/conf.d/welcome.conf deleted file mode 100644 index 34b4b72..0000000 --- a/setup/projects/katrin/files/etc/apache2-kaas/conf.d/welcome.conf +++ /dev/null @@ -1,18 +0,0 @@ -# -# This configuration file enables the default "Welcome" page if there -# is no default index page present for the root URL. To disable the -# Welcome page, comment out all the lines below. -# -# NOTE: if this file is removed, it will be restored on upgrades. -# - - Options -Indexes - ErrorDocument 403 /.noindex.html - - - - AllowOverride None - Require all granted - - -Alias /.noindex.html /opt/rh/httpd24/root/usr/share/httpd/noindex/index.html diff --git a/setup/projects/katrin/files/etc/apache2-kaas/conf.modules.d/00-base.conf b/setup/projects/katrin/files/etc/apache2-kaas/conf.modules.d/00-base.conf deleted file mode 100644 index c109de6..0000000 --- a/setup/projects/katrin/files/etc/apache2-kaas/conf.modules.d/00-base.conf +++ /dev/null @@ -1,67 +0,0 @@ -# -# This file loads most of the modules included with the Apache HTTP -# Server itself. -# - -LoadModule access_compat_module modules/mod_access_compat.so -LoadModule actions_module modules/mod_actions.so -LoadModule alias_module modules/mod_alias.so -LoadModule allowmethods_module modules/mod_allowmethods.so -LoadModule auth_basic_module modules/mod_auth_basic.so -LoadModule auth_digest_module modules/mod_auth_digest.so -LoadModule authn_anon_module modules/mod_authn_anon.so -LoadModule authn_core_module modules/mod_authn_core.so -LoadModule authn_dbd_module modules/mod_authn_dbd.so -LoadModule authn_dbm_module modules/mod_authn_dbm.so -LoadModule authn_file_module modules/mod_authn_file.so -LoadModule authn_socache_module modules/mod_authn_socache.so -LoadModule authz_core_module modules/mod_authz_core.so -LoadModule authz_dbd_module modules/mod_authz_dbd.so -LoadModule authz_dbm_module modules/mod_authz_dbm.so -LoadModule authz_groupfile_module modules/mod_authz_groupfile.so -LoadModule authz_host_module modules/mod_authz_host.so -LoadModule authz_owner_module modules/mod_authz_owner.so -LoadModule authz_user_module modules/mod_authz_user.so -LoadModule autoindex_module modules/mod_autoindex.so -LoadModule cache_module modules/mod_cache.so -LoadModule cache_disk_module modules/mod_cache_disk.so -LoadModule cache_socache_module modules/mod_cache_socache.so -LoadModule data_module modules/mod_data.so -LoadModule dbd_module modules/mod_dbd.so -LoadModule deflate_module modules/mod_deflate.so -LoadModule dir_module modules/mod_dir.so -LoadModule dumpio_module modules/mod_dumpio.so -LoadModule echo_module modules/mod_echo.so -LoadModule env_module modules/mod_env.so -LoadModule expires_module modules/mod_expires.so -LoadModule ext_filter_module modules/mod_ext_filter.so -LoadModule filter_module modules/mod_filter.so -LoadModule headers_module modules/mod_headers.so -LoadModule http2_module modules/mod_http2.so -LoadModule include_module modules/mod_include.so -LoadModule info_module modules/mod_info.so -LoadModule log_config_module modules/mod_log_config.so -LoadModule logio_module modules/mod_logio.so -LoadModule macro_module modules/mod_macro.so -LoadModule mime_magic_module modules/mod_mime_magic.so -LoadModule mime_module modules/mod_mime.so -LoadModule negotiation_module modules/mod_negotiation.so -LoadModule remoteip_module modules/mod_remoteip.so -LoadModule reqtimeout_module modules/mod_reqtimeout.so -LoadModule request_module modules/mod_request.so -LoadModule rewrite_module modules/mod_rewrite.so -LoadModule setenvif_module modules/mod_setenvif.so -LoadModule slotmem_plain_module modules/mod_slotmem_plain.so -LoadModule slotmem_shm_module modules/mod_slotmem_shm.so -LoadModule socache_dbm_module modules/mod_socache_dbm.so -LoadModule socache_memcache_module modules/mod_socache_memcache.so -LoadModule socache_shmcb_module modules/mod_socache_shmcb.so -LoadModule status_module modules/mod_status.so -LoadModule substitute_module modules/mod_substitute.so -LoadModule suexec_module modules/mod_suexec.so -LoadModule unique_id_module modules/mod_unique_id.so -LoadModule unixd_module modules/mod_unixd.so -LoadModule userdir_module modules/mod_userdir.so -LoadModule version_module modules/mod_version.so -LoadModule vhost_alias_module modules/mod_vhost_alias.so - diff --git a/setup/projects/katrin/files/etc/apache2-kaas/conf.modules.d/00-dav.conf b/setup/projects/katrin/files/etc/apache2-kaas/conf.modules.d/00-dav.conf deleted file mode 100644 index e6af8de..0000000 --- a/setup/projects/katrin/files/etc/apache2-kaas/conf.modules.d/00-dav.conf +++ /dev/null @@ -1,3 +0,0 @@ -LoadModule dav_module modules/mod_dav.so -LoadModule dav_fs_module modules/mod_dav_fs.so -LoadModule dav_lock_module modules/mod_dav_lock.so diff --git a/setup/projects/katrin/files/etc/apache2-kaas/conf.modules.d/00-lua.conf b/setup/projects/katrin/files/etc/apache2-kaas/conf.modules.d/00-lua.conf deleted file mode 100644 index 9e0d0db..0000000 --- a/setup/projects/katrin/files/etc/apache2-kaas/conf.modules.d/00-lua.conf +++ /dev/null @@ -1 +0,0 @@ -LoadModule lua_module modules/mod_lua.so diff --git a/setup/projects/katrin/files/etc/apache2-kaas/conf.modules.d/00-mpm.conf b/setup/projects/katrin/files/etc/apache2-kaas/conf.modules.d/00-mpm.conf deleted file mode 100644 index 7bfd1d4..0000000 --- a/setup/projects/katrin/files/etc/apache2-kaas/conf.modules.d/00-mpm.conf +++ /dev/null @@ -1,19 +0,0 @@ -# Select the MPM module which should be used by uncommenting exactly -# one of the following LoadModule lines: - -# prefork MPM: Implements a non-threaded, pre-forking web server -# See: http://httpd.apache.org/docs/2.4/mod/prefork.html -LoadModule mpm_prefork_module modules/mod_mpm_prefork.so - -# worker MPM: Multi-Processing Module implementing a hybrid -# multi-threaded multi-process web server -# See: http://httpd.apache.org/docs/2.4/mod/worker.html -# -#LoadModule mpm_worker_module modules/mod_mpm_worker.so - -# event MPM: A variant of the worker MPM with the goal of consuming -# threads only for connections with active processing -# See: http://httpd.apache.org/docs/2.4/mod/event.html -# -#LoadModule mpm_event_module modules/mod_mpm_event.so - diff --git a/setup/projects/katrin/files/etc/apache2-kaas/conf.modules.d/00-optional.conf b/setup/projects/katrin/files/etc/apache2-kaas/conf.modules.d/00-optional.conf deleted file mode 100644 index 70bda5e..0000000 --- a/setup/projects/katrin/files/etc/apache2-kaas/conf.modules.d/00-optional.conf +++ /dev/null @@ -1,20 +0,0 @@ -# -# This file lists modules included with the Apache HTTP Server -# which are not enabled by default. -# - -#LoadModule asis_module modules/mod_asis.so -#LoadModule buffer_module modules/mod_buffer.so -#LoadModule file_cache_module modules/mod_file_cache.so -#LoadModule watchdog_module modules/mod_watchdog.so -#LoadModule heartbeat_module modules/mod_heartbeat.so -#LoadModule heartmonitor_module modules/mod_heartmonitor.so -#LoadModule usertrack_module modules/mod_usertrack.so -#LoadModule dialup_module modules/mod_dialup.so -#LoadModule charset_lite_module modules/mod_charset_lite.so -#LoadModule log_debug_module modules/mod_log_debug.so -#LoadModule log_forensic_module modules/mod_log_forensic.so -#LoadModule ratelimit_module modules/mod_ratelimit.so -#LoadModule reflector_module modules/mod_reflector.so -#LoadModule sed_module modules/mod_sed.so -#LoadModule speling_module modules/mod_speling.so diff --git a/setup/projects/katrin/files/etc/apache2-kaas/conf.modules.d/00-proxy.conf b/setup/projects/katrin/files/etc/apache2-kaas/conf.modules.d/00-proxy.conf deleted file mode 100644 index cc0bca0..0000000 --- a/setup/projects/katrin/files/etc/apache2-kaas/conf.modules.d/00-proxy.conf +++ /dev/null @@ -1,16 +0,0 @@ -# This file configures all the proxy modules: -LoadModule proxy_module modules/mod_proxy.so -LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so -LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so -LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so -LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so -LoadModule proxy_ajp_module modules/mod_proxy_ajp.so -LoadModule proxy_balancer_module modules/mod_proxy_balancer.so -LoadModule proxy_connect_module modules/mod_proxy_connect.so -LoadModule proxy_express_module modules/mod_proxy_express.so -LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so -LoadModule proxy_fdpass_module modules/mod_proxy_fdpass.so -LoadModule proxy_ftp_module modules/mod_proxy_ftp.so -LoadModule proxy_http_module modules/mod_proxy_http.so -LoadModule proxy_scgi_module modules/mod_proxy_scgi.so -LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so diff --git a/setup/projects/katrin/files/etc/apache2-kaas/conf.modules.d/00-ssl.conf b/setup/projects/katrin/files/etc/apache2-kaas/conf.modules.d/00-ssl.conf deleted file mode 100644 index 53235cd..0000000 --- a/setup/projects/katrin/files/etc/apache2-kaas/conf.modules.d/00-ssl.conf +++ /dev/null @@ -1 +0,0 @@ -LoadModule ssl_module modules/mod_ssl.so diff --git a/setup/projects/katrin/files/etc/apache2-kaas/conf.modules.d/00-systemd.conf b/setup/projects/katrin/files/etc/apache2-kaas/conf.modules.d/00-systemd.conf deleted file mode 100644 index b208c97..0000000 --- a/setup/projects/katrin/files/etc/apache2-kaas/conf.modules.d/00-systemd.conf +++ /dev/null @@ -1,2 +0,0 @@ -# This file configures systemd module: -LoadModule systemd_module modules/mod_systemd.so diff --git a/setup/projects/katrin/files/etc/apache2-kaas/conf.modules.d/01-cgi.conf b/setup/projects/katrin/files/etc/apache2-kaas/conf.modules.d/01-cgi.conf deleted file mode 100644 index 5b8b936..0000000 --- a/setup/projects/katrin/files/etc/apache2-kaas/conf.modules.d/01-cgi.conf +++ /dev/null @@ -1,14 +0,0 @@ -# This configuration file loads a CGI module appropriate to the MPM -# which has been configured in 00-mpm.conf. mod_cgid should be used -# with a threaded MPM; mod_cgi with the prefork MPM. - - - LoadModule cgid_module modules/mod_cgid.so - - - LoadModule cgid_module modules/mod_cgid.so - - - LoadModule cgi_module modules/mod_cgi.so - - diff --git a/setup/projects/katrin/files/etc/apache2-kaas/conf/httpd.conf b/setup/projects/katrin/files/etc/apache2-kaas/conf/httpd.conf deleted file mode 100644 index 88fcb97..0000000 --- a/setup/projects/katrin/files/etc/apache2-kaas/conf/httpd.conf +++ /dev/null @@ -1,353 +0,0 @@ -# -# This is the main Apache HTTP server configuration file. It contains the -# configuration directives that give the server its instructions. -# See for detailed information. -# In particular, see -# -# for a discussion of each configuration directive. -# -# Do NOT simply read the instructions in here without understanding -# what they do. They're here only as hints or reminders. If you are unsure -# consult the online docs. You have been warned. -# -# Configuration and logfile names: If the filenames you specify for many -# of the server's control files begin with "/" (or "drive:/" for Win32), the -# server will use that explicit path. If the filenames do *not* begin -# with "/", the value of ServerRoot is prepended -- so 'log/access_log' -# with ServerRoot set to '/www' will be interpreted by the -# server as '/www/log/access_log', where as '/log/access_log' will be -# interpreted as '/log/access_log'. - -# -# ServerRoot: The top of the directory tree under which the server's -# configuration, error, and log files are kept. -# -# Do not add a slash at the end of the directory path. If you point -# ServerRoot at a non-local disk, be sure to specify a local disk on the -# Mutex directive, if file-based mutexes are used. If you wish to share the -# same ServerRoot for multiple httpd daemons, you will need to change at -# least PidFile. -# -ServerRoot "/opt/rh/httpd24/root/etc/httpd" - -# -# Listen: Allows you to bind Apache to specific IP addresses and/or -# ports, instead of the default. See also the -# directive. -# -# Change this to Listen on specific IP addresses as shown below to -# prevent Apache from glomming onto all bound IP addresses. -# -#Listen 12.34.56.78:80 -Listen 0.0.0.0:8080 - -# -# Dynamic Shared Object (DSO) Support -# -# To be able to use the functionality of a module which was built as a DSO you -# have to place corresponding `LoadModule' lines at this location so the -# directives contained in it are actually available _before_ they are used. -# Statically compiled modules (those listed by `httpd -l') do not need -# to be loaded here. -# -# Example: -# LoadModule foo_module modules/mod_foo.so -# -Include conf.modules.d/*.conf - -# -# If you wish httpd to run as a different user or group, you must run -# httpd as root initially and it will switch. -# -# User/Group: The name (or #number) of the user/group to run httpd as. -# It is usually good practice to create a dedicated user and group for -# running httpd, as with most system services. -# -User default -Group root - -# 'Main' server configuration -# -# The directives in this section set up the values used by the 'main' -# server, which responds to any requests that aren't handled by a -# definition. These values also provide defaults for -# any containers you may define later in the file. -# -# All of these directives may appear inside containers, -# in which case these default settings will be overridden for the -# virtual host being defined. -# - -# -# ServerAdmin: Your address, where problems with the server should be -# e-mailed. This address appears on some server-generated pages, such -# as error documents. e.g. admin@your-domain.com -# -ServerAdmin root@localhost - -# -# ServerName gives the name and port that the server uses to identify itself. -# This can often be determined automatically, but we recommend you specify -# it explicitly to prevent problems during startup. -# -# If your host doesn't have a registered DNS name, enter its IP address here. -# -#ServerName www.example.com:80 - -# -# Deny access to the entirety of your server's filesystem. You must -# explicitly permit access to web content directories in other -# blocks below. -# - - AllowOverride none - Require all denied - - -# -# Note that from this point forward you must specifically allow -# particular features to be enabled - so if something's not working as -# you might expect, make sure that you have specifically enabled it -# below. -# - -# -# DocumentRoot: The directory out of which you will serve your -# documents. By default, all requests are taken from this directory, but -# symbolic links and aliases may be used to point to other locations. -# -DocumentRoot "/opt/rh/httpd24/root/var/www/html" - -# -# Relax access to content within /opt/rh/httpd24/root/var/www. -# - - AllowOverride None - # Allow open access: - Require all granted - - -# Further relax access to the default document root: - - # - # Possible values for the Options directive are "None", "All", - # or any combination of: - # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews - # - # Note that "MultiViews" must be named *explicitly* --- "Options All" - # doesn't give it to you. - # - # The Options directive is both complicated and important. Please see - # http://httpd.apache.org/docs/2.4/mod/core.html#options - # for more information. - # - Options Indexes FollowSymLinks - - # - # AllowOverride controls what directives may be placed in .htaccess files. - # It can be "All", "None", or any combination of the keywords: - # Options FileInfo AuthConfig Limit - # - AllowOverride All - - # - # Controls who can get stuff from this server. - # - Require all granted - - -# -# DirectoryIndex: sets the file that Apache will serve if a directory -# is requested. -# - - DirectoryIndex index.html - - -# -# The following lines prevent .htaccess and .htpasswd files from being -# viewed by Web clients. -# - - Require all denied - - -# -# ErrorLog: The location of the error log file. -# If you do not specify an ErrorLog directive within a -# container, error messages relating to that virtual host will be -# logged here. If you *do* define an error logfile for a -# container, that host's errors will be logged there and not here. -# -ErrorLog |/usr/bin/cat - -# -# LogLevel: Control the number of messages logged to the error_log. -# Possible values include: debug, info, notice, warn, error, crit, -# alert, emerg. -# -LogLevel warn - - - # - # The following directives define some format nicknames for use with - # a CustomLog directive (see below). - # - LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined - LogFormat "%h %l %u %t \"%r\" %>s %b" common - - - # You need to enable mod_logio.c to use %I and %O - LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio - - - # - # The location and format of the access logfile (Common Logfile Format). - # If you do not define any access logfiles within a - # container, they will be logged here. Contrariwise, if you *do* - # define per- access logfiles, transactions will be - # logged therein and *not* in this file. - # - #CustomLog "logs/access_log" common - - # - # If you prefer a logfile with access, agent, and referer information - # (Combined Logfile Format) you can use the following directive. - # - CustomLog |/usr/bin/cat combined - - - - # - # Redirect: Allows you to tell clients about documents that used to - # exist in your server's namespace, but do not anymore. The client - # will make a new request for the document at its new location. - # Example: - # Redirect permanent /foo http://www.example.com/bar - - # - # Alias: Maps web paths into filesystem paths and is used to - # access content that does not live under the DocumentRoot. - # Example: - # Alias /webpath /full/filesystem/path - # - # If you include a trailing / on /webpath then the server will - # require it to be present in the URL. You will also likely - # need to provide a section to allow access to - # the filesystem path. - - # - # ScriptAlias: This controls which directories contain server scripts. - # ScriptAliases are essentially the same as Aliases, except that - # documents in the target directory are treated as applications and - # run by the server when requested rather than as documents sent to the - # client. The same rules about trailing "/" apply to ScriptAlias - # directives as to Alias. - # - ScriptAlias /cgi-bin/ "/opt/rh/httpd24/root/var/www/cgi-bin/" - - - -# -# "/opt/rh/httpd24/root/var/www/cgi-bin" should be changed to whatever your ScriptAliased -# CGI directory exists, if you have that configured. -# - - AllowOverride None - Options None - Require all granted - - - - # - # TypesConfig points to the file containing the list of mappings from - # filename extension to MIME-type. - # - TypesConfig /etc/mime.types - - # - # AddType allows you to add to or override the MIME configuration - # file specified in TypesConfig for specific file types. - # - #AddType application/x-gzip .tgz - # - # AddEncoding allows you to have certain browsers uncompress - # information on the fly. Note: Not all browsers support this. - # - #AddEncoding x-compress .Z - #AddEncoding x-gzip .gz .tgz - # - # If the AddEncoding directives above are commented-out, then you - # probably should define those extensions to indicate media types: - # - AddType application/x-compress .Z - AddType application/x-gzip .gz .tgz - - # - # AddHandler allows you to map certain file extensions to "handlers": - # actions unrelated to filetype. These can be either built into the server - # or added with the Action directive (see below) - # - # To use CGI scripts outside of ScriptAliased directories: - # (You will also need to add "ExecCGI" to the "Options" directive.) - # - #AddHandler cgi-script .cgi - - # For type maps (negotiated resources): - #AddHandler type-map var - - # - # Filters allow you to process content before it is sent to the client. - # - # To parse .shtml files for server-side includes (SSI): - # (You will also need to add "Includes" to the "Options" directive.) - # - AddType text/html .shtml - AddOutputFilter INCLUDES .shtml - - -# -# Specify a default charset for all content served; this enables -# interpretation of all content as UTF-8 by default. To use the -# default browser choice (ISO-8859-1), or to allow the META tags -# in HTML content to override this choice, comment out this -# directive: -# -AddDefaultCharset UTF-8 - - - # - # The mod_mime_magic module allows the server to use various hints from the - # contents of the file itself to determine its type. The MIMEMagicFile - # directive tells the module where the hint definitions are located. - # - MIMEMagicFile conf/magic - - -# -# Customizable error responses come in three flavors: -# 1) plain text 2) local redirects 3) external redirects -# -# Some examples: -#ErrorDocument 500 "The server made a boo boo." -#ErrorDocument 404 /missing.html -#ErrorDocument 404 "/cgi-bin/missing_handler.pl" -#ErrorDocument 402 http://www.example.com/subscription_info.html -# - -# -# EnableMMAP and EnableSendfile: On systems that support it, -# memory-mapping or the sendfile syscall may be used to deliver -# files. This usually improves server performance, but must -# be turned off when serving from networked-mounted -# filesystems or if support for these functions is otherwise -# broken on your system. -# Defaults if commented: EnableMMAP On, EnableSendfile Off -# -#EnableMMAP off -EnableSendfile on - -# Supplemental configuration -# -# Load config files in the "/etc/httpd/conf.d" directory, if any. -IncludeOptional conf.d/*.conf diff --git a/setup/projects/katrin/files/etc/apache2-kaas/conf/magic b/setup/projects/katrin/files/etc/apache2-kaas/conf/magic deleted file mode 100644 index 7c56119..0000000 --- a/setup/projects/katrin/files/etc/apache2-kaas/conf/magic +++ /dev/null @@ -1,385 +0,0 @@ -# Magic data for mod_mime_magic Apache module (originally for file(1) command) -# The module is described in /manual/mod/mod_mime_magic.html -# -# The format is 4-5 columns: -# Column #1: byte number to begin checking from, ">" indicates continuation -# Column #2: type of data to match -# Column #3: contents of data to match -# Column #4: MIME type of result -# Column #5: MIME encoding of result (optional) - -#------------------------------------------------------------------------------ -# Localstuff: file(1) magic for locally observed files -# Add any locally observed files here. - -#------------------------------------------------------------------------------ -# end local stuff -#------------------------------------------------------------------------------ - -#------------------------------------------------------------------------------ -# Java - -0 short 0xcafe ->2 short 0xbabe application/java - -#------------------------------------------------------------------------------ -# audio: file(1) magic for sound formats -# -# from Jan Nicolai Langfeldt , -# - -# Sun/NeXT audio data -0 string .snd ->12 belong 1 audio/basic ->12 belong 2 audio/basic ->12 belong 3 audio/basic ->12 belong 4 audio/basic ->12 belong 5 audio/basic ->12 belong 6 audio/basic ->12 belong 7 audio/basic - ->12 belong 23 audio/x-adpcm - -# DEC systems (e.g. DECstation 5000) use a variant of the Sun/NeXT format -# that uses little-endian encoding and has a different magic number -# (0x0064732E in little-endian encoding). -0 lelong 0x0064732E ->12 lelong 1 audio/x-dec-basic ->12 lelong 2 audio/x-dec-basic ->12 lelong 3 audio/x-dec-basic ->12 lelong 4 audio/x-dec-basic ->12 lelong 5 audio/x-dec-basic ->12 lelong 6 audio/x-dec-basic ->12 lelong 7 audio/x-dec-basic -# compressed (G.721 ADPCM) ->12 lelong 23 audio/x-dec-adpcm - -# Bytes 0-3 of AIFF, AIFF-C, & 8SVX audio files are "FORM" -# AIFF audio data -8 string AIFF audio/x-aiff -# AIFF-C audio data -8 string AIFC audio/x-aiff -# IFF/8SVX audio data -8 string 8SVX audio/x-aiff - -# Creative Labs AUDIO stuff -# Standard MIDI data -0 string MThd audio/unknown -#>9 byte >0 (format %d) -#>11 byte >1 using %d channels -# Creative Music (CMF) data -0 string CTMF audio/unknown -# SoundBlaster instrument data -0 string SBI audio/unknown -# Creative Labs voice data -0 string Creative\ Voice\ File audio/unknown -## is this next line right? it came this way... -#>19 byte 0x1A -#>23 byte >0 - version %d -#>22 byte >0 \b.%d - -# [GRR 950115: is this also Creative Labs? Guessing that first line -# should be string instead of unknown-endian long...] -#0 long 0x4e54524b MultiTrack sound data -#0 string NTRK MultiTrack sound data -#>4 long x - version %ld - -# Microsoft WAVE format (*.wav) -# [GRR 950115: probably all of the shorts and longs should be leshort/lelong] -# Microsoft RIFF -0 string RIFF audio/unknown -# - WAVE format ->8 string WAVE audio/x-wav -# MPEG audio. -0 beshort&0xfff0 0xfff0 audio/mpeg -# C64 SID Music files, from Linus Walleij -0 string PSID audio/prs.sid - -#------------------------------------------------------------------------------ -# c-lang: file(1) magic for C programs or various scripts -# - -# XPM icons (Greg Roelofs, newt@uchicago.edu) -# ideally should go into "images", but entries below would tag XPM as C source -0 string /*\ XPM image/x-xbm 7bit - -# this first will upset you if you're a PL/1 shop... (are there any left?) -# in which case rm it; ascmagic will catch real C programs -# C or REXX program text -0 string /* text/plain -# C++ program text -0 string // text/plain - -#------------------------------------------------------------------------------ -# compress: file(1) magic for pure-compression formats (no archives) -# -# compress, gzip, pack, compact, huf, squeeze, crunch, freeze, yabba, whap, etc. -# -# Formats for various forms of compressed data -# Formats for "compress" proper have been moved into "compress.c", -# because it tries to uncompress it to figure out what's inside. - -# standard unix compress -0 string \037\235 application/octet-stream x-compress - -# gzip (GNU zip, not to be confused with [Info-ZIP/PKWARE] zip archiver) -0 string \037\213 application/octet-stream x-gzip - -# According to gzip.h, this is the correct byte order for packed data. -0 string \037\036 application/octet-stream -# -# This magic number is byte-order-independent. -# -0 short 017437 application/octet-stream - -# XXX - why *two* entries for "compacted data", one of which is -# byte-order independent, and one of which is byte-order dependent? -# -# compacted data -0 short 0x1fff application/octet-stream -0 string \377\037 application/octet-stream -# huf output -0 short 0145405 application/octet-stream - -# Squeeze and Crunch... -# These numbers were gleaned from the Unix versions of the programs to -# handle these formats. Note that I can only uncrunch, not crunch, and -# I didn't have a crunched file handy, so the crunch number is untested. -# Keith Waclena -#0 leshort 0x76FF squeezed data (CP/M, DOS) -#0 leshort 0x76FE crunched data (CP/M, DOS) - -# Freeze -#0 string \037\237 Frozen file 2.1 -#0 string \037\236 Frozen file 1.0 (or gzip 0.5) - -# lzh? -#0 string \037\240 LZH compressed data - -#------------------------------------------------------------------------------ -# frame: file(1) magic for FrameMaker files -# -# This stuff came on a FrameMaker demo tape, most of which is -# copyright, but this file is "published" as witness the following: -# -0 string \ -# and Anna Shergold -# -0 string \ -0 string \14 byte 12 (OS/2 1.x format) -#>14 byte 64 (OS/2 2.x format) -#>14 byte 40 (Windows 3.x format) -#0 string IC icon -#0 string PI pointer -#0 string CI color icon -#0 string CP color pointer -#0 string BA bitmap array - -0 string \x89PNG image/png -0 string FWS application/x-shockwave-flash -0 string CWS application/x-shockwave-flash - -#------------------------------------------------------------------------------ -# lisp: file(1) magic for lisp programs -# -# various lisp types, from Daniel Quinlan (quinlan@yggdrasil.com) -0 string ;; text/plain 8bit -# Emacs 18 - this is always correct, but not very magical. -0 string \012( application/x-elc -# Emacs 19 -0 string ;ELC\023\000\000\000 application/x-elc - -#------------------------------------------------------------------------------ -# mail.news: file(1) magic for mail and news -# -# There are tests to ascmagic.c to cope with mail and news. -0 string Relay-Version: message/rfc822 7bit -0 string #!\ rnews message/rfc822 7bit -0 string N#!\ rnews message/rfc822 7bit -0 string Forward\ to message/rfc822 7bit -0 string Pipe\ to message/rfc822 7bit -0 string Return-Path: message/rfc822 7bit -0 string Path: message/news 8bit -0 string Xref: message/news 8bit -0 string From: message/rfc822 7bit -0 string Article message/news 8bit -#------------------------------------------------------------------------------ -# msword: file(1) magic for MS Word files -# -# Contributor claims: -# Reversed-engineered MS Word magic numbers -# - -0 string \376\067\0\043 application/msword -0 string \333\245-\0\0\0 application/msword - -# disable this one because it applies also to other -# Office/OLE documents for which msword is not correct. See PR#2608. -#0 string \320\317\021\340\241\261 application/msword - - - -#------------------------------------------------------------------------------ -# printer: file(1) magic for printer-formatted files -# - -# PostScript -0 string %! application/postscript -0 string \004%! application/postscript - -# Acrobat -# (due to clamen@cs.cmu.edu) -0 string %PDF- application/pdf - -#------------------------------------------------------------------------------ -# sc: file(1) magic for "sc" spreadsheet -# -38 string Spreadsheet application/x-sc - -#------------------------------------------------------------------------------ -# tex: file(1) magic for TeX files -# -# XXX - needs byte-endian stuff (big-endian and little-endian DVI?) -# -# From - -# Although we may know the offset of certain text fields in TeX DVI -# and font files, we can't use them reliably because they are not -# zero terminated. [but we do anyway, christos] -0 string \367\002 application/x-dvi -#0 string \367\203 TeX generic font data -#0 string \367\131 TeX packed font data -#0 string \367\312 TeX virtual font data -#0 string This\ is\ TeX, TeX transcript text -#0 string This\ is\ METAFONT, METAFONT transcript text - -# There is no way to detect TeX Font Metric (*.tfm) files without -# breaking them apart and reading the data. The following patterns -# match most *.tfm files generated by METAFONT or afm2tfm. -#2 string \000\021 TeX font metric data -#2 string \000\022 TeX font metric data -#>34 string >\0 (%s) - -# Texinfo and GNU Info, from Daniel Quinlan (quinlan@yggdrasil.com) -#0 string \\input\ texinfo Texinfo source text -#0 string This\ is\ Info\ file GNU Info text - -# correct TeX magic for Linux (and maybe more) -# from Peter Tobias (tobias@server.et-inf.fho-emden.de) -# -0 leshort 0x02f7 application/x-dvi - -# RTF - Rich Text Format -0 string {\\rtf application/rtf - -#------------------------------------------------------------------------------ -# animation: file(1) magic for animation/movie formats -# -# animation formats, originally from vax@ccwf.cc.utexas.edu (VaX#n8) -# MPEG file -0 string \000\000\001\263 video/mpeg -# -# The contributor claims: -# I couldn't find a real magic number for these, however, this -# -appears- to work. Note that it might catch other files, too, -# so BE CAREFUL! -# -# Note that title and author appear in the two 20-byte chunks -# at decimal offsets 2 and 22, respectively, but they are XOR'ed with -# 255 (hex FF)! DL format SUCKS BIG ROCKS. -# -# DL file version 1 , medium format (160x100, 4 images/screen) -0 byte 1 video/unknown -0 byte 2 video/unknown -# Quicktime video, from Linus Walleij -# from Apple quicktime file format documentation. -4 string moov video/quicktime -4 string mdat video/quicktime - diff --git a/setup/projects/katrin/files/etc/apache2-kaas/logs b/setup/projects/katrin/files/etc/apache2-kaas/logs deleted file mode 120000 index 2a478fd..0000000 --- a/setup/projects/katrin/files/etc/apache2-kaas/logs +++ /dev/null @@ -1 +0,0 @@ -/var/log/httpd24 \ No newline at end of file diff --git a/setup/projects/katrin/files/etc/apache2-kaas/modules b/setup/projects/katrin/files/etc/apache2-kaas/modules deleted file mode 120000 index a4c456b..0000000 --- a/setup/projects/katrin/files/etc/apache2-kaas/modules +++ /dev/null @@ -1 +0,0 @@ -/opt/rh/httpd24/root/usr/lib64/httpd/modules \ No newline at end of file diff --git a/setup/projects/katrin/files/etc/apache2-kaas/run b/setup/projects/katrin/files/etc/apache2-kaas/run deleted file mode 120000 index c1a28cf..0000000 --- a/setup/projects/katrin/files/etc/apache2-kaas/run +++ /dev/null @@ -1 +0,0 @@ -/opt/rh/httpd24/root/var/run/httpd \ No newline at end of file -- cgit v1.2.3