diff options
Diffstat (limited to 'inventory')
| -rw-r--r-- | inventory/byo/hosts.aep.example | 472 | ||||
| -rw-r--r-- | inventory/byo/hosts.aep_quickstart | 20 | ||||
| -rw-r--r-- | inventory/byo/hosts.origin.example | 63 | ||||
| -rw-r--r-- | inventory/byo/hosts.ose.example | 59 |
4 files changed, 108 insertions, 506 deletions
diff --git a/inventory/byo/hosts.aep.example b/inventory/byo/hosts.aep.example deleted file mode 100644 index cff003a9c..000000000 --- a/inventory/byo/hosts.aep.example +++ /dev/null @@ -1,472 +0,0 @@ -# This is an example of a bring your own (byo) host inventory - -# Create an OSEv3 group that contains the masters and nodes groups -[OSEv3:children] -masters -nodes -etcd -lb -nfs - -# Set variables common for all OSEv3 hosts -[OSEv3:vars] -# SSH user, this user should allow ssh based auth without requiring a -# password. If using ssh key based auth, then the key should be managed by an -# ssh agent. -ansible_ssh_user=root - -# If ansible_ssh_user is not root, ansible_become must be set to true and the -# user must be configured for passwordless sudo -#ansible_become=yes - -# Debug level for all Atomic Enterprise components (Defaults to 2) -debug_level=2 - -# deployment type valid values are origin, online, atomic-enterprise, and openshift-enterprise -deployment_type=atomic-enterprise - -# Specify the generic release of OpenShift to install. This is used mainly just during installation, after which we -# rely on the version running on the first master. Works best for containerized installs where we can usually -# use this to lookup the latest exact version of the container images, which is the tag actually used to configure -# the cluster. For RPM installations we just verify the version detected in your configured repos matches this -# release. -openshift_release=v3.2 - -# Specify an exact container image tag to install or configure. -# WARNING: This value will be used for all hosts in containerized environments, even those that have another version installed. -# This could potentially trigger an upgrade and downtime, so be careful with modifying this value after the cluster is set up. -#openshift_image_tag=v3.2.0.46 - -# Specify an exact rpm version to install or configure. -# WARNING: This value will be used for all hosts in RPM based environments, even those that have another version installed. -# This could potentially trigger an upgrade and downtime, so be careful with modifying this value after the cluster is set up. -#openshift_pkg_version=-3.2.0.46 - -# Install the openshift examples -#openshift_install_examples=true - -# Configure logoutURL in the master config for console customization -# See: https://docs.openshift.org/latest/install_config/web_console_customization.html#changing-the-logout-url -#openshift_master_logout_url=http://example.com - -# Configure extensionScripts in the master config for console customization -# See: https://docs.openshift.org/latest/install_config/web_console_customization.html#loading-custom-scripts-and-stylesheets -#openshift_master_extension_scripts=['/path/to/script1.js','/path/to/script2.js'] - -# Configure extensionStylesheets in the master config for console customization -# See: https://docs.openshift.org/latest/install_config/web_console_customization.html#loading-custom-scripts-and-stylesheets -#openshift_master_extension_stylesheets=['/path/to/stylesheet1.css','/path/to/stylesheet2.css'] - -# Configure extensions in the master config for console customization -# See: https://docs.openshift.org/latest/install_config/web_console_customization.html#serving-static-files -#openshift_master_extensions=[{'name': 'images', 'sourceDirectory': '/path/to/my_images'}] - -# Configure extensions in the master config for console customization -# See: https://docs.openshift.org/latest/install_config/web_console_customization.html#serving-static-files -#openshift_master_oauth_template=/path/to/login-template.html - -# Configure metricsPublicURL in the master config for cluster metrics -# See: https://docs.openshift.com/enterprise/latest/install_config/cluster_metrics.html -#openshift_master_metrics_public_url=https://hawkular-metrics.example.com/hawkular/metrics - -# Configure loggingPublicURL in the master config for aggregate logging -# See: https://docs.openshift.com/enterprise/latest/install_config/aggregate_logging.html -#openshift_master_logging_public_url=https://kibana.example.com - -# Configure imagePolicyConfig in the master config -# See: https://godoc.org/github.com/openshift/origin/pkg/cmd/server/api#ImagePolicyConfig -#openshift_master_image_policy_config={"maxImagesBulkImportedPerRepository": 3, "disableScheduledImport": true} - -# Docker Configuration -# Add additional, insecure, and blocked registries to global docker configuration -# For enterprise deployment types we ensure that registry.access.redhat.com is -# included if you do not include it -#openshift_docker_additional_registries=registry.example.com -#openshift_docker_insecure_registries=registry.example.com -#openshift_docker_blocked_registries=registry.hacker.com -# Disable pushing to dockerhub -#openshift_docker_disable_push_dockerhub=True -# Items added, as is, to end of /etc/sysconfig/docker OPTIONS -# Default value: "--log-driver=json-file --log-opt max-size=50m" -#openshift_docker_options="-l warn --ipv6=false" - -# Specify exact version of Docker to configure or upgrade to. -# Downgrades are not supported and will error out. Be careful when upgrading docker from < 1.10 to > 1.10. -# docker_version="1.10.3" - -# Skip upgrading Docker during an OpenShift upgrade, leaves the current Docker version alone. -# docker_upgrade=False - -# Alternate image format string. If you're not modifying the format string and -# only need to inject your own registry you may want to consider -# openshift_docker_additional_registries instead -#oreg_url=example.com/aep3/aep-${component}:${version} -# If oreg_url points to a registry other than registry.access.redhat.com we can -# modify image streams to point at that registry by setting the following to true -#openshift_examples_modify_imagestreams=True - -# Additional yum repos to install -#openshift_additional_repos=[{'id': 'aep-devel', 'name': 'aep-devel', 'baseurl': 'http://example.com/puddle/build/AtomicOpenShift/3.1/latest/RH7-RHOSE-3.0/$basearch/os', 'enabled': 1, 'gpgcheck': 0}] - -# htpasswd auth -openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true', 'challenge': 'true', 'kind': 'HTPasswdPasswordIdentityProvider', 'filename': '/etc/origin/master/htpasswd'}] -# Defining htpasswd users -#openshift_master_htpasswd_users={'user1': '<pre-hashed password>', 'user2': '<pre-hashed password>'} -# or -#openshift_master_htpasswd_file=<path to local pre-generated htpasswd file> - -# Allow all auth -#openshift_master_identity_providers=[{'name': 'allow_all', 'login': 'true', 'challenge': 'true', 'kind': 'AllowAllPasswordIdentityProvider'}] - -# LDAP auth -#openshift_master_identity_providers=[{'name': 'my_ldap_provider', 'challenge': 'true', 'login': 'true', 'kind': 'LDAPPasswordIdentityProvider', 'attributes': {'id': ['dn'], 'email': ['mail'], 'name': ['cn'], 'preferredUsername': ['uid']}, 'bindDN': '', 'bindPassword': '', 'ca': '', 'insecure': 'false', 'url': 'ldap://ldap.example.com:389/ou=users,dc=example,dc=com?uid'}] -# Configuring the ldap ca certificate -#openshift_master_ldap_ca=<ca text> -# or -#openshift_master_ldap_ca_file=<path to local ca file to use> - -# Available variables for configuring certificates for other identity providers: -#openshift_master_openid_ca -#openshift_master_openid_ca_file -#openshift_master_request_header_ca -#openshift_master_request_header_ca_file - -# Cloud Provider Configuration -# -# Note: You may make use of environment variables rather than store -# sensitive configuration within the ansible inventory. -# For example: -#openshift_cloudprovider_aws_access_key="{{ lookup('env','AWS_ACCESS_KEY_ID') }}" -#openshift_cloudprovider_aws_secret_key="{{ lookup('env','AWS_SECRET_ACCESS_KEY') }}" -# -# AWS -#openshift_cloudprovider_kind=aws -# Note: IAM profiles may be used instead of storing API credentials on disk. -#openshift_cloudprovider_aws_access_key=aws_access_key_id -#openshift_cloudprovider_aws_secret_key=aws_secret_access_key -# -# Openstack -#openshift_cloudprovider_kind=openstack -#openshift_cloudprovider_openstack_auth_url=http://openstack.example.com:35357/v2.0/ -#openshift_cloudprovider_openstack_username=username -#openshift_cloudprovider_openstack_password=password -#openshift_cloudprovider_openstack_tenant_id=tenant_id -#openshift_cloudprovider_openstack_tenant_name=tenant_name -#openshift_cloudprovider_openstack_region=region -#openshift_cloudprovider_openstack_lb_subnet_id=subnet_id - -# Project Configuration -#osm_project_request_message='' -#osm_project_request_template='' -#osm_mcs_allocator_range='s0:/2' -#osm_mcs_labels_per_project=5 -#osm_uid_allocator_range='1000000000-1999999999/10000' - -# Configure additional projects -#openshift_additional_projects={'my-project': {'default_node_selector': 'label=value'}} - -# Enable cockpit -#osm_use_cockpit=true -# -# Set cockpit plugins -#osm_cockpit_plugins=['cockpit-kubernetes'] - -# Native high availability cluster method with optional load balancer. -# If no lb group is defined, the installer assumes that a load balancer has -# been preconfigured. For installation the value of -# openshift_master_cluster_hostname must resolve to the load balancer -# or to one or all of the masters defined in the inventory if no load -# balancer is present. -#openshift_master_cluster_method=native -#openshift_master_cluster_hostname=openshift-ansible.test.example.com -#openshift_master_cluster_public_hostname=openshift-ansible.test.example.com - -# Pacemaker high availability cluster method. -# Pacemaker HA environment must be able to self provision the -# configured VIP. For installation openshift_master_cluster_hostname -# must resolve to the configured VIP. -#openshift_master_cluster_method=pacemaker -#openshift_master_cluster_password=openshift_cluster -#openshift_master_cluster_vip=192.168.133.25 -#openshift_master_cluster_public_vip=192.168.133.25 -#openshift_master_cluster_hostname=openshift-ansible.test.example.com -#openshift_master_cluster_public_hostname=openshift-ansible.test.example.com - -# Override the default controller lease ttl -#osm_controller_lease_ttl=30 - -# Configure controller arguments -#osm_controller_args={'resource-quota-sync-period': ['10s']} - -# Configure api server arguments -#osm_api_server_args={'max-requests-inflight': ['400']} - -# default subdomain to use for exposed routes -#openshift_master_default_subdomain=apps.test.example.com - -# additional cors origins -#osm_custom_cors_origins=['foo.example.com', 'bar.example.com'] - -# default project node selector -#osm_default_node_selector='region=primary' - -# Override the default pod eviction timeout -#openshift_master_pod_eviction_timeout=5m - -# Override the default oauth tokenConfig settings: -# openshift_master_access_token_max_seconds=86400 -# openshift_master_auth_token_max_seconds=500 - -# Override master servingInfo.maxRequestsInFlight -#openshift_master_max_requests_inflight=500 - -# default storage plugin dependencies to install, by default the ceph and -# glusterfs plugin dependencies will be installed, if available. -#osn_storage_plugin_deps=['ceph','glusterfs','iscsi'] - -# OpenShift Router Options -# -# An OpenShift router will be created during install if there are -# nodes present with labels matching the default router selector, -# "region=infra". Set openshift_node_labels per node as needed in -# order to label nodes. -# -# Example: -# [nodes] -# node.example.com openshift_node_labels="{'region': 'infra'}" -# -# Router selector (optional) -# Router will only be created if nodes matching this label are present. -# Default value: 'region=infra' -#openshift_hosted_router_selector='region=infra' -# -# Router replicas (optional) -# Unless specified, openshift-ansible will calculate the replica count -# based on the number of nodes matching the openshift router selector. -#openshift_hosted_router_replicas=2 -# -# Router force subdomain (optional) -# A router path format to force on all routes used by this router -# (will ignore the route host value) -#openshift_hosted_router_force_subdomain='${name}-${namespace}.apps.example.com' -# -# Router certificate (optional) -# Provide local certificate paths which will be configured as the -# router's default certificate. -#openshift_hosted_router_certificate={"certfile": "/path/to/router.crt", "keyfile": "/path/to/router.key", "cafile": "/path/to/router-ca.crt"} - -# Openshift Registry Options -# -# An OpenShift registry will be created during install if there are -# nodes present with labels matching the default registry selector, -# "region=infra". Set openshift_node_labels per node as needed in -# order to label nodes. -# -# Example: -# [nodes] -# node.example.com openshift_node_labels="{'region': 'infra'}" -# -# Registry selector (optional) -# Registry will only be created if nodes matching this label are present. -# Default value: 'region=infra' -#openshift_hosted_registry_selector='region=infra' -# -# Registry replicas (optional) -# Unless specified, openshift-ansible will calculate the replica count -# based on the number of nodes matching the openshift registry selector. -#openshift_hosted_registry_replicas=2 - -# Registry Storage Options -# -# NFS Host Group -# An NFS volume will be created with path "nfs_directory/volume_name" -# on the host within the [nfs] host group. For example, the volume -# path using these options would be "/exports/registry" -#openshift_hosted_registry_storage_kind=nfs -#openshift_hosted_registry_storage_access_modes=['ReadWriteMany'] -#openshift_hosted_registry_storage_nfs_directory=/exports -#openshift_hosted_registry_storage_nfs_options='*(rw,root_squash)' -#openshift_hosted_registry_storage_volume_name=registry -#openshift_hosted_registry_storage_volume_size=10Gi -# -# External NFS Host -# NFS volume must already exist with path "nfs_directory/_volume_name" on -# the storage_host. For example, the remote volume path using these -# options would be "nfs.example.com:/exports/registry" -#openshift_hosted_registry_storage_kind=nfs -#openshift_hosted_registry_storage_access_modes=['ReadWriteMany'] -#openshift_hosted_registry_storage_host=nfs.example.com -#openshift_hosted_registry_storage_nfs_directory=/exports -#openshift_hosted_registry_storage_volume_name=registry -#openshift_hosted_registry_storage_volume_size=10Gi -# -# Openstack -# Volume must already exist. -#openshift_hosted_registry_storage_kind=openstack -#openshift_hosted_registry_storage_access_modes=['ReadWriteOnce'] -#openshift_hosted_registry_storage_openstack_filesystem=ext4 -#openshift_hosted_registry_storage_openstack_volumeID=3a650b4f-c8c5-4e0a-8ca5-eaee11f16c57 -#openshift_hosted_registry_storage_volume_size=10Gi -# -# AWS S3 -# S3 bucket must already exist. -#openshift_hosted_registry_storage_kind=object -#openshift_hosted_registry_storage_provider=s3 -#openshift_hosted_registry_storage_s3_accesskey=aws_access_key_id -#openshift_hosted_registry_storage_s3_secretkey=aws_secret_access_key -#openshift_hosted_registry_storage_s3_bucket=bucket_name -#openshift_hosted_registry_storage_s3_region=bucket_region -#openshift_hosted_registry_storage_s3_chunksize=26214400 - -# Configure the multi-tenant SDN plugin (default is 'redhat/openshift-ovs-subnet') -# os_sdn_network_plugin_name='redhat/openshift-ovs-multitenant' - -# Disable the OpenShift SDN plugin -# openshift_use_openshift_sdn=False - -# Configure SDN cluster network and kubernetes service CIDR blocks. These -# network blocks should be private and should not conflict with network blocks -# in your infrastructure that pods may require access to. Can not be changed -# after deployment. -#osm_cluster_network_cidr=10.1.0.0/16 -#openshift_portal_net=172.30.0.0/16 - -# Configure number of bits to allocate to each host’s subnet e.g. 8 -# would mean a /24 network on the host. -#osm_host_subnet_length=8 - -# Configure master API and console ports. -#openshift_master_api_port=8443 -#openshift_master_console_port=8443 - -# set RPM version for debugging purposes -#openshift_pkg_version=-3.1.0.0 - -# Configure custom named certificates -# NOTE: openshift_master_named_certificates is cached on masters and is an -# additive fact, meaning that each run with a different set of certificates -# will add the newly provided certificates to the cached set of certificates. -# -# An optional CA may be specified for each named certificate. CAs will -# be added to the OpenShift CA bundle which allows for the named -# certificate to be served for internal cluster communication. -# -# If you would like openshift_master_named_certificates to be overwritten with -# the provided value, specify openshift_master_overwrite_named_certificates. -#openshift_master_overwrite_named_certificates=true -# -# Provide local certificate paths which will be deployed to masters -#openshift_master_named_certificates=[{"certfile": "/path/to/custom1.crt", "keyfile": "/path/to/custom1.key", "cafile": "/path/to/custom-ca1.crt"}] -# -# Detected names may be overridden by specifying the "names" key -#openshift_master_named_certificates=[{"certfile": "/path/to/custom1.crt", "keyfile": "/path/to/custom1.key", "names": ["public-master-host.com"], "cafile": "/path/to/custom-ca1.crt"}] - -# Session options -#openshift_master_session_name=ssn -#openshift_master_session_max_seconds=3600 - -# An authentication and encryption secret will be generated if secrets -# are not provided. If provided, openshift_master_session_auth_secrets -# and openshift_master_encryption_secrets must be equal length. -# -# Signing secrets, used to authenticate sessions using -# HMAC. Recommended to use secrets with 32 or 64 bytes. -#openshift_master_session_auth_secrets=['DONT+USE+THIS+SECRET+b4NV+pmZNSO'] -# -# Encrypting secrets, used to encrypt sessions. Must be 16, 24, or 32 -# characters long, to select AES-128, AES-192, or AES-256. -#openshift_master_session_encryption_secrets=['DONT+USE+THIS+SECRET+b4NV+pmZNSO'] - -# configure how often node iptables rules are refreshed -#openshift_node_iptables_sync_period=5s - -# Configure nodeIP in the node config -# This is needed in cases where node traffic is desired to go over an -# interface other than the default network interface. -#openshift_node_set_node_ip=True - -# Force setting of system hostname when configuring OpenShift -# This works around issues related to installations that do not have valid dns -# entries for the interfaces attached to the host. -#openshift_set_hostname=True - -# Configure dnsIP in the node config -#openshift_dns_ip=172.30.0.1 - -# Configure node kubelet arguments -#openshift_node_kubelet_args={'max-pods': ['110'], 'image-gc-high-threshold': ['90'], 'image-gc-low-threshold': ['80']} - -# Configure logrotate scripts -# See: https://github.com/nickhammond/ansible-logrotate -#logrotate_scripts=[{"name": "syslog", "path": "/var/log/cron\n/var/log/maillog\n/var/log/messages\n/var/log/secure\n/var/log/spooler\n", "options": ["daily", "rotate 7", "compress", "sharedscripts", "missingok"], "scripts": {"postrotate": "/bin/kill -HUP `cat /var/run/syslogd.pid 2> /dev/null` 2> /dev/null || true"}}] - -# openshift-ansible will wait indefinitely for your input when it detects that the -# value of openshift_hostname resolves to an IP address not bound to any local -# interfaces. This mis-configuration is problematic for any pod leveraging host -# networking and liveness or readiness probes. -# Setting this variable to true will override that check. -#openshift_override_hostname_check=true - -# Configure dnsmasq for cluster dns, switch the host's local resolver to use dnsmasq -# and configure node's dnsIP to point at the node's local dnsmasq instance. Defaults -# to True for Origin 1.2 and OSE 3.2. False for 1.1 / 3.1 installs, this cannot -# be used with 1.0 and 3.0. -# openshift_use_dnsmasq=False - -# Global Proxy Configuration -# These options configure HTTP_PROXY, HTTPS_PROXY, and NOPROXY environment -# variables for docker and master services. -#openshift_http_proxy=http://USER:PASSWORD@IPADDR:PORT -#openshift_https_proxy=https://USER:PASSWORD@IPADDR:PORT -#openshift_no_proxy='.hosts.example.com,some-host.com' -# -# Most environments don't require a proxy between openshift masters, nodes, and -# etcd hosts. So automatically add those hostnames to the openshift_no_proxy list. -# If all of your hosts share a common domain you may wish to disable this and -# specify that domain above. -#openshift_generate_no_proxy_hosts=True -# -# These options configure the BuildDefaults admission controller which injects -# environment variables into Builds. These values will default to the global proxy -# config values. You only need to set these if they differ from the global settings -# above. See BuildDefaults -# documentation at https://docs.openshift.org/latest/admin_guide/build_defaults_overrides.html -#openshift_builddefaults_http_proxy=http://USER:PASSWORD@HOST:PORT -#openshift_builddefaults_https_proxy=https://USER:PASSWORD@HOST:PORT -#openshift_builddefaults_no_proxy=build_defaults -#openshift_builddefaults_git_http_proxy=http://USER:PASSWORD@HOST:PORT -#openshift_builddefaults_git_https_proxy=https://USER:PASSWORD@HOST:PORT -# Or you may optionally define your own serialized as json -#openshift_builddefaults_json='{"BuildDefaults":{"configuration":{"apiVersion":"v1","env":[{"name":"HTTP_PROXY","value":"http://proxy.example.com.redhat.com:3128"},{"name":"NO_PROXY","value":"ose3-master.example.com"}],"gitHTTPProxy":"http://proxy.example.com:3128","kind":"BuildDefaultsConfig"}}}' - -# masterConfig.volumeConfig.dynamicProvisioningEnabled, configurable as of 1.2/3.2, enabled by default -#openshift_master_dynamic_provisioning_enabled=False - -# Configure usage of openshift_clock role. -#openshift_clock_enabled=true - -# OpenShift Per-Service Environment Variables -# Environment variables are added to /etc/sysconfig files for -# each OpenShift service: node, master (api and controllers). -# API and controllers environment variables are merged in single -# master environments. -#openshift_master_api_env_vars={"ENABLE_HTTP2": "true"} -#openshift_master_controllers_env_vars={"ENABLE_HTTP2": "true"} -#openshift_node_env_vars={"ENABLE_HTTP2": "true"} - -# host group for masters -[masters] -aep3-master[1:3]-ansible.test.example.com - -[etcd] -aep3-etcd[1:3]-ansible.test.example.com - -[lb] -aep3-lb-ansible.test.example.com - -# NOTE: Currently we require that masters be part of the SDN which requires that they also be nodes -# However, in order to ensure that your masters are not burdened with running pods you should -# make them unschedulable by adding openshift_schedulable=False any node that's also a master. -[nodes] -aep3-master[1:3]-ansible.test.example.com -aep3-node[1:2]-ansible.test.example.com openshift_node_labels="{'region': 'primary', 'zone': 'default'}" diff --git a/inventory/byo/hosts.aep_quickstart b/inventory/byo/hosts.aep_quickstart deleted file mode 100644 index 46ea3a03f..000000000 --- a/inventory/byo/hosts.aep_quickstart +++ /dev/null @@ -1,20 +0,0 @@ -[OSEv3:children] -masters -nodes -etcd -lb - -[OSEv3:vars] -ansible_ssh_user=root -deployment_type=atomic-enterprise -osm_use_cockpit=true - -[masters] -ose3-master.example.com - -[nodes] -ose3-master.example.com openshift_scheduleable=True - -[etcd] - -[lb] diff --git a/inventory/byo/hosts.origin.example b/inventory/byo/hosts.origin.example index 8e7883f3b..4124ecb31 100644 --- a/inventory/byo/hosts.origin.example +++ b/inventory/byo/hosts.origin.example @@ -65,10 +65,6 @@ openshift_release=v1.2 # See: https://docs.openshift.org/latest/install_config/web_console_customization.html#serving-static-files #openshift_master_oauth_template=/path/to/login-template.html -# Configure metricsPublicURL in the master config for cluster metrics -# See: https://docs.openshift.org/latest/install_config/cluster_metrics.html -#openshift_master_metrics_public_url=https://hawkular-metrics.example.com/hawkular/metrics - # Configure loggingPublicURL in the master config for aggregate logging # See: https://docs.openshift.org/latest/install_config/aggregate_logging.html #openshift_master_logging_public_url=https://kibana.example.com @@ -109,10 +105,6 @@ openshift_release=v1.2 # Origin copr repo #openshift_additional_repos=[{'id': 'openshift-origin-copr', 'name': 'OpenShift Origin COPR', 'baseurl': 'https://copr-be.cloud.fedoraproject.org/results/maxamillion/origin-next/epel-7-$basearch/', 'enabled': 1, 'gpgcheck': 1, 'gpgkey': 'https://copr-be.cloud.fedoraproject.org/results/maxamillion/origin-next/pubkey.gpg'}] -# Origin Fedora copr repo -# Use this if you are installing on Fedora -#openshift_additional_repos=[{'id': 'fedora-openshift-origin-copr', 'name': 'OpenShift Origin COPR for Fedora', 'baseurl': 'https://copr-be.cloud.fedoraproject.org/results/maxamillion/fedora-openshift/fedora-$releasever-$basearch/', 'enabled': 1, 'gpgcheck': 1, 'gpgkey': 'https://copr-be.cloud.fedoraproject.org/results/maxamillion/fedora-openshift/pubkey.gpg'}] - # htpasswd auth openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true', 'challenge': 'true', 'kind': 'HTPasswdPasswordIdentityProvider', 'filename': '/etc/origin/master/htpasswd'}] # Defining htpasswd users @@ -330,6 +322,49 @@ openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true', #openshift_hosted_registry_storage_s3_chunksize=26214400 #openshift_hosted_registry_pullthrough=true +# Metrics deployment +# See: https://docs.openshift.com/enterprise/latest/install_config/cluster_metrics.html +# +# By default metrics are not automatically deployed, set this to enable them +# openshift_hosted_metrics_deploy=true +# +# Storage Options +# If openshift_hosted_metrics_storage_kind is unset then metrics will be stored +# in an EmptyDir volume and will be deleted when the cassandra pod terminates. +# Storage options A & B currently support only one cassandra pod which is +# generally enough for up to 1000 pods. Additional volumes can be created +# manually after the fact and metrics scaled per the docs. +# +# Option A - NFS Host Group +# An NFS volume will be created with path "nfs_directory/volume_name" +# on the host within the [nfs] host group. For example, the volume +# path using these options would be "/exports/metrics" +#openshift_hosted_metrics_storage_kind=nfs +#openshift_hosted_metrics_storage_access_modes=['ReadWriteOnce'] +#openshift_hosted_metrics_storage_nfs_directory=/exports +#openshift_hosted_metrics_storage_nfs_options='*(rw,root_squash)' +#openshift_hosted_metrics_storage_volume_name=metrics +#openshift_hosted_metrics_storage_volume_size=10Gi +# +# Option B - External NFS Host +# NFS volume must already exist with path "nfs_directory/_volume_name" on +# the storage_host. For example, the remote volume path using these +# options would be "nfs.example.com:/exports/metrics" +#openshift_hosted_metrics_storage_kind=nfs +#openshift_hosted_metrics_storage_access_modes=['ReadWriteOnce'] +#openshift_hosted_metrics_storage_host=nfs.example.com +#openshift_hosted_metrics_storage_nfs_directory=/exports +#openshift_hosted_metrics_storage_volume_name=metrics +#openshift_hosted_metrics_storage_volume_size=10Gi +# +# Option C - Dynamic -- If openshift supports dynamic volume provisioning for +# your cloud platform use this. +#openshift_hosted_metrics_storage_kind=dynamic +# +# Override metricsPublicURL in the master config for cluster metrics +# Defaults to https://hawkular-metrics.{{openshift_master_default_subdomain}}/hawkular/metrics +#openshift_hosted_metrics_public_url=https://hawkular-metrics.example.com/hawkular/metrics + # Configure the multi-tenant SDN plugin (default is 'redhat/openshift-ovs-subnet') # os_sdn_network_plugin_name='redhat/openshift-ovs-multitenant' @@ -343,6 +378,16 @@ openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true', #osm_cluster_network_cidr=10.1.0.0/16 #openshift_portal_net=172.30.0.0/16 + +# ExternalIPNetworkCIDRs controls what values are acceptable for the +# service external IP field. If empty, no externalIP may be set. It +# may contain a list of CIDRs which are checked for access. If a CIDR +# is prefixed with !, IPs in that CIDR will be rejected. Rejections +# will be applied first, then the IP checked against one of the +# allowed CIDRs. You should ensure this range does not overlap with +# your nodes, pods, or service CIDRs for security reasons. +#openshift_master_external_ip_network_cidrs=['0.0.0.0/0'] + # Configure number of bits to allocate to each host’s subnet e.g. 8 # would mean a /24 network on the host. #osm_host_subnet_length=8 @@ -420,7 +465,7 @@ openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true', #openshift_dns_ip=172.30.0.1 # Configure node kubelet arguments -#openshift_node_kubelet_args={'max-pods': ['110'], 'image-gc-high-threshold': ['90'], 'image-gc-low-threshold': ['80']} +#openshift_node_kubelet_args={'pods-per-core': ['10'], 'max-pods': ['250'], 'image-gc-high-threshold': ['90'], 'image-gc-low-threshold': ['80']} # Configure logrotate scripts # See: https://github.com/nickhammond/ansible-logrotate diff --git a/inventory/byo/hosts.ose.example b/inventory/byo/hosts.ose.example index 0d358146c..b617d2a03 100644 --- a/inventory/byo/hosts.ose.example +++ b/inventory/byo/hosts.ose.example @@ -65,10 +65,6 @@ openshift_release=v3.2 # See: https://docs.openshift.org/latest/install_config/web_console_customization.html#serving-static-files #openshift_master_oauth_template=/path/to/login-template.html -# Configure metricsPublicURL in the master config for cluster metrics -# See: https://docs.openshift.com/enterprise/latest/install_config/cluster_metrics.html -#openshift_master_metrics_public_url=https://hawkular-metrics.example.com/hawkular/metrics - # Configure loggingPublicURL in the master config for aggregate logging # See: https://docs.openshift.com/enterprise/latest/install_config/aggregate_logging.html #openshift_master_logging_public_url=https://kibana.example.com @@ -325,6 +321,50 @@ openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true', #openshift_hosted_registry_storage_s3_chunksize=26214400 #openshift_hosted_registry_pullthrough=true +# Metrics deployment +# See: https://docs.openshift.com/enterprise/latest/install_config/cluster_metrics.html +# +# By default metrics are not automatically deployed, set this to enable them +# openshift_hosted_metrics_deploy=true +# +# Storage Options +# If openshift_hosted_metrics_storage_kind is unset then metrics will be stored +# in an EmptyDir volume and will be deleted when the cassandra pod terminates. +# Storage options A & B currently support only one cassandra pod which is +# generally enough for up to 1000 pods. Additional volumes can be created +# manually after the fact and metrics scaled per the docs. +# +# Option A - NFS Host Group +# An NFS volume will be created with path "nfs_directory/volume_name" +# on the host within the [nfs] host group. For example, the volume +# path using these options would be "/exports/metrics" +#openshift_hosted_metrics_storage_kind=nfs +#openshift_hosted_metrics_storage_access_modes=['ReadWriteOnce'] +#openshift_hosted_metrics_storage_nfs_directory=/exports +#openshift_hosted_metrics_storage_nfs_options='*(rw,root_squash)' +#openshift_hosted_metrics_storage_volume_name=metrics +#openshift_hosted_metrics_storage_volume_size=10Gi +# +# Option B - External NFS Host +# NFS volume must already exist with path "nfs_directory/_volume_name" on +# the storage_host. For example, the remote volume path using these +# options would be "nfs.example.com:/exports/metrics" +#openshift_hosted_metrics_storage_kind=nfs +#openshift_hosted_metrics_storage_access_modes=['ReadWriteOnce'] +#openshift_hosted_metrics_storage_host=nfs.example.com +#openshift_hosted_metrics_storage_nfs_directory=/exports +#openshift_hosted_metrics_storage_volume_name=metrics +#openshift_hosted_metrics_storage_volume_size=10Gi +# +# Option C - Dynamic -- If openshift supports dynamic volume provisioning for +# your cloud platform use this. +#openshift_hosted_metrics_storage_kind=dynamic +# +# Override metricsPublicURL in the master config for cluster metrics +# Defaults to https://hawkular-metrics.{{openshift_master_default_subdomain}}/hawkular/metrics +#openshift_hosted_metrics_public_url=https://hawkular-metrics.example.com/hawkular/metrics + + # Configure the multi-tenant SDN plugin (default is 'redhat/openshift-ovs-subnet') # os_sdn_network_plugin_name='redhat/openshift-ovs-multitenant' @@ -339,6 +379,15 @@ openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true', #openshift_portal_net=172.30.0.0/16 +# ExternalIPNetworkCIDRs controls what values are acceptable for the +# service external IP field. If empty, no externalIP may be set. It +# may contain a list of CIDRs which are checked for access. If a CIDR +# is prefixed with !, IPs in that CIDR will be rejected. Rejections +# will be applied first, then the IP checked against one of the +# allowed CIDRs. You should ensure this range does not overlap with +# your nodes, pods, or service CIDRs for security reasons. +#openshift_master_external_ip_network_cidrs=['0.0.0.0/0'] + # Configure number of bits to allocate to each host’s subnet e.g. 8 # would mean a /24 network on the host. #osm_host_subnet_length=8 @@ -416,7 +465,7 @@ openshift_master_identity_providers=[{'name': 'htpasswd_auth', 'login': 'true', #openshift_dns_ip=172.30.0.1 # Configure node kubelet arguments -#openshift_node_kubelet_args={'max-pods': ['110'], 'image-gc-high-threshold': ['90'], 'image-gc-low-threshold': ['80']} +#openshift_node_kubelet_args={'pods-per-core': ['10'], 'max-pods': ['250'], 'image-gc-high-threshold': ['90'], 'image-gc-low-threshold': ['80']} # Configure logrotate scripts # See: https://github.com/nickhammond/ansible-logrotate |