diff options
Diffstat (limited to 'playbooks/adhoc')
| -rw-r--r-- | playbooks/adhoc/docker_loopback_to_lvm/docker-storage-setup | 2 | ||||
| -rw-r--r-- | playbooks/adhoc/docker_loopback_to_lvm/docker_loopback_to_direct_lvm.yml | 142 | ||||
| -rwxr-xr-x | playbooks/adhoc/docker_loopback_to_lvm/ops-docker-loopback-to-direct-lvm.yml | 104 | ||||
| -rw-r--r-- | playbooks/adhoc/docker_storage_cleanup/docker_storage_cleanup.yml | 69 | ||||
| -rw-r--r-- | playbooks/adhoc/grow_docker_vg/filter_plugins/oo_filters.py | 41 | ||||
| -rw-r--r-- | playbooks/adhoc/grow_docker_vg/grow_docker_vg.yml | 206 | ||||
| -rw-r--r-- | playbooks/adhoc/s3_registry/s3_registry.j2 | 20 | ||||
| -rw-r--r-- | playbooks/adhoc/s3_registry/s3_registry.yml | 61 | ||||
| -rw-r--r-- | playbooks/adhoc/upgrades/README.md | 21 | ||||
| l--------- | playbooks/adhoc/upgrades/filter_plugins | 1 | ||||
| l--------- | playbooks/adhoc/upgrades/lookup_plugins | 1 | ||||
| l--------- | playbooks/adhoc/upgrades/roles | 1 | ||||
| -rw-r--r-- | playbooks/adhoc/upgrades/upgrade.yml | 115 |
13 files changed, 784 insertions, 0 deletions
diff --git a/playbooks/adhoc/docker_loopback_to_lvm/docker-storage-setup b/playbooks/adhoc/docker_loopback_to_lvm/docker-storage-setup new file mode 100644 index 000000000..059058823 --- /dev/null +++ b/playbooks/adhoc/docker_loopback_to_lvm/docker-storage-setup @@ -0,0 +1,2 @@ +DEVS=/dev/xvdb +VG=docker_vg diff --git a/playbooks/adhoc/docker_loopback_to_lvm/docker_loopback_to_direct_lvm.yml b/playbooks/adhoc/docker_loopback_to_lvm/docker_loopback_to_direct_lvm.yml new file mode 100644 index 000000000..b6a2d2f26 --- /dev/null +++ b/playbooks/adhoc/docker_loopback_to_lvm/docker_loopback_to_direct_lvm.yml @@ -0,0 +1,142 @@ +--- +# This playbook coverts docker to go from loopback to direct-lvm (the Red Hat recommended way to run docker) +# in AWS. This adds an additional EBS volume and creates the Volume Group on this EBS volume to use. +# +# To run: +# 1. Source your AWS credentials (make sure it's the corresponding AWS account) into your environment +# export AWS_ACCESS_KEY_ID='XXXXX' +# export AWS_SECRET_ACCESS_KEY='XXXXXX' +# +# 2. run the playbook: +# ansible-playbook -e 'cli_tag_name=<tag-name>' -e "cli_volume_size=30" docker_loopback_to_direct_lvm.yml +# +# Example: +# ansible-playbook -e 'cli_tag_name=ops-master-12345' -e "cli_volume_size=30" docker_loopback_to_direct_lvm.yml +# +# Notes: +# * By default this will do a 30GB volume. +# * iops are calculated by Disk Size * 30. e.g ( 30GB * 30) = 900 iops +# * This will remove /var/lib/docker! +# * You may need to re-deploy docker images after this is run (like monitoring) +# + +- name: Fix docker to have a provisioned iops drive + hosts: "tag_Name_{{ cli_tag_name }}" + user: root + connection: ssh + gather_facts: no + + vars: + cli_volume_type: gp2 + cli_volume_size: 30 + + pre_tasks: + - fail: + msg: "This playbook requires {{item}} to be set." + when: "{{ item }} is not defined or {{ item }} == ''" + with_items: + - cli_tag_name + - cli_volume_size + + - debug: + var: hosts + + - name: start docker + service: + name: docker + state: started + + - name: Determine if loopback + shell: docker info | grep 'Data file:.*loop' + register: loop_device_check + ignore_errors: yes + + - debug: + var: loop_device_check + + - name: fail if we don't detect loopback + fail: + msg: loopback not detected! Please investigate manually. + when: loop_device_check.rc == 1 + + - name: stop zagg client monitoring container + service: + name: oso-rhel7-zagg-client + state: stopped + ignore_errors: yes + + - name: stop pcp client monitoring container + service: + name: oso-f22-host-monitoring + state: stopped + ignore_errors: yes + + - name: stop docker + service: + name: docker + state: stopped + + - name: delete /var/lib/docker + command: rm -rf /var/lib/docker + + - name: remove /var/lib/docker + command: rm -rf /var/lib/docker + + - name: check to see if /dev/xvdb exists + command: test -e /dev/xvdb + register: xvdb_check + ignore_errors: yes + + - debug: var=xvdb_check + + - name: fail if /dev/xvdb already exists + fail: + msg: /dev/xvdb already exists. Please investigate + when: xvdb_check.rc == 0 + + - name: Create a volume and attach it + delegate_to: localhost + ec2_vol: + state: present + instance: "{{ ec2_id }}" + region: "{{ ec2_region }}" + volume_size: "{{ cli_volume_size | default(30, True)}}" + volume_type: "{{ cli_volume_type }}" + device_name: /dev/xvdb + register: vol + + - debug: var=vol + + - name: tag the vol with a name + delegate_to: localhost + ec2_tag: region={{ ec2_region }} resource={{ vol.volume_id }} + args: + tags: + Name: "{{ ec2_tag_Name }}" + env: "{{ ec2_tag_environment }}" + register: voltags + + - name: Wait for volume to attach + pause: + seconds: 30 + + - name: copy the docker-storage-setup config file + copy: + src: docker-storage-setup + dest: /etc/sysconfig/docker-storage-setup + owner: root + group: root + mode: 0664 + + - name: docker storage setup + command: docker-storage-setup + register: setup_output + + - debug: var=setup_output + + - name: start docker + command: systemctl start docker.service + register: dockerstart + + - debug: var=dockerstart + diff --git a/playbooks/adhoc/docker_loopback_to_lvm/ops-docker-loopback-to-direct-lvm.yml b/playbooks/adhoc/docker_loopback_to_lvm/ops-docker-loopback-to-direct-lvm.yml new file mode 100755 index 000000000..614b2537a --- /dev/null +++ b/playbooks/adhoc/docker_loopback_to_lvm/ops-docker-loopback-to-direct-lvm.yml @@ -0,0 +1,104 @@ +#!/usr/bin/ansible-playbook +--- +# This playbook coverts docker to go from loopback to direct-lvm (the Red Hat recommended way to run docker). +# +# It requires the block device to be already provisioned and attached to the host. This is a generic playbook, +# meant to be used for manual conversion. For AWS specific conversions, use the other playbook in this directory. +# +# To run: +# ./ops-docker-loopback-to-direct-lvm.yml -e cli_host=<host to run on> -e cli_docker_device=<path to device> +# +# Example: +# ./ops-docker-loopback-to-direct-lvm.yml -e cli_host=twiesttest-master-fd32 -e cli_docker_device=/dev/sdb +# +# Notes: +# * This will remove /var/lib/docker! +# * You may need to re-deploy docker images after this is run (like monitoring) + +- name: Fix docker to have a provisioned iops drive + hosts: "{{ cli_name }}" + user: root + connection: ssh + gather_facts: no + + pre_tasks: + - fail: + msg: "This playbook requires {{item}} to be set." + when: "{{ item }} is not defined or {{ item }} == ''" + with_items: + - cli_docker_device + + - name: start docker + service: + name: docker + state: started + + - name: Determine if loopback + shell: docker info | grep 'Data file:.*loop' + register: loop_device_check + ignore_errors: yes + + - debug: + var: loop_device_check + + - name: fail if we don't detect loopback + fail: + msg: loopback not detected! Please investigate manually. + when: loop_device_check.rc == 1 + + - name: stop zagg client monitoring container + service: + name: oso-rhel7-zagg-client + state: stopped + ignore_errors: yes + + - name: stop pcp client monitoring container + service: + name: oso-f22-host-monitoring + state: stopped + ignore_errors: yes + + - name: "check to see if {{ cli_docker_device }} exists" + command: "test -e {{ cli_docker_device }}" + register: docker_dev_check + ignore_errors: yes + + - debug: var=docker_dev_check + + - name: "fail if {{ cli_docker_device }} doesn't exist" + fail: + msg: "{{ cli_docker_device }} doesn't exist. Please investigate" + when: docker_dev_check.rc != 0 + + - name: stop docker + service: + name: docker + state: stopped + + - name: delete /var/lib/docker + command: rm -rf /var/lib/docker + + - name: remove /var/lib/docker + command: rm -rf /var/lib/docker + + - name: copy the docker-storage-setup config file + copy: + content: > + DEVS={{ cli_docker_device }} + VG=docker_vg + dest: /etc/sysconfig/docker-storage-setup + owner: root + group: root + mode: 0664 + + - name: docker storage setup + command: docker-storage-setup + register: setup_output + + - debug: var=setup_output + + - name: start docker + command: systemctl start docker.service + register: dockerstart + + - debug: var=dockerstart diff --git a/playbooks/adhoc/docker_storage_cleanup/docker_storage_cleanup.yml b/playbooks/adhoc/docker_storage_cleanup/docker_storage_cleanup.yml new file mode 100644 index 000000000..a19291a9f --- /dev/null +++ b/playbooks/adhoc/docker_storage_cleanup/docker_storage_cleanup.yml @@ -0,0 +1,69 @@ +--- +# This playbook attempts to cleanup unwanted docker files to help alleviate docker disk space issues. +# +# To run: +# +# 1. run the playbook: +# +# ansible-playbook -e 'cli_tag_name=<tag-name>' docker_storage_cleanup.yml +# +# Example: +# +# ansible-playbook -e 'cli_tag_name=ops-node-compute-12345' docker_storage_cleanup.yml +# +# Notes: +# * This *should* not interfere with running docker images +# + +- name: Clean up Docker Storage + gather_facts: no + hosts: "tag_Name_{{ cli_tag_name }}" + user: root + connection: ssh + + pre_tasks: + + - fail: + msg: "This playbook requires {{item}} to be set." + when: "{{ item }} is not defined or {{ item }} == ''" + with_items: + - cli_tag_name + + - name: Ensure docker is running + service: + name: docker + state: started + enabled: yes + + - name: Get docker info + command: docker info + register: docker_info + + - name: Show docker info + debug: + var: docker_info.stdout_lines + + - name: Remove exited and dead containers + shell: "docker ps -a | awk '/Exited|Dead/ {print $1}' | xargs --no-run-if-empty docker rm" + ignore_errors: yes + + - name: Remove dangling docker images + shell: "docker images -q -f dangling=true | xargs --no-run-if-empty docker rmi" + ignore_errors: yes + + - name: Remove non-running docker images + shell: "docker images | grep -v -e registry.access.redhat.com -e docker-registry.usersys.redhat.com -e docker-registry.ops.rhcloud.com | awk '{print $3}' | xargs --no-run-if-empty docker rmi 2>/dev/null" + ignore_errors: yes + + # leaving off the '-t' for docker exec. With it, it doesn't work with ansible and tty support + - name: update zabbix docker items + command: docker exec -i oso-rhel7-zagg-client /usr/local/bin/cron-send-docker-metrics.py + + # Get and show docker info again. + - name: Get docker info + command: docker info + register: docker_info + + - name: Show docker info + debug: + var: docker_info.stdout_lines diff --git a/playbooks/adhoc/grow_docker_vg/filter_plugins/oo_filters.py b/playbooks/adhoc/grow_docker_vg/filter_plugins/oo_filters.py new file mode 100644 index 000000000..d0264cde9 --- /dev/null +++ b/playbooks/adhoc/grow_docker_vg/filter_plugins/oo_filters.py @@ -0,0 +1,41 @@ +#!/usr/bin/python +# -*- coding: utf-8 -*- +# vim: expandtab:tabstop=4:shiftwidth=4 +''' +Custom filters for use in openshift-ansible +''' + +import pdb + + +class FilterModule(object): + ''' Custom ansible filters ''' + + @staticmethod + def oo_pdb(arg): + ''' This pops you into a pdb instance where arg is the data passed in + from the filter. + Ex: "{{ hostvars | oo_pdb }}" + ''' + pdb.set_trace() + return arg + + @staticmethod + def translate_volume_name(volumes, target_volume): + ''' + This filter matches a device string /dev/sdX to /dev/xvdX + It will then return the AWS volume ID + ''' + for vol in volumes: + translated_name = vol["attachment_set"]["device"].replace("/dev/sd", "/dev/xvd") + if target_volume.startswith(translated_name): + return vol["id"] + + return None + + + def filters(self): + ''' returns a mapping of filters to methods ''' + return { + "translate_volume_name": self.translate_volume_name, + } diff --git a/playbooks/adhoc/grow_docker_vg/grow_docker_vg.yml b/playbooks/adhoc/grow_docker_vg/grow_docker_vg.yml new file mode 100644 index 000000000..63d473146 --- /dev/null +++ b/playbooks/adhoc/grow_docker_vg/grow_docker_vg.yml @@ -0,0 +1,206 @@ +--- +# This playbook grows the docker VG on a node by: +# * add a new volume +# * add volume to the existing VG. +# * pv move to the new volume. +# * remove old volume +# * detach volume +# * mark old volume in AWS with "REMOVE ME" tag +# * grow docker LVM to 90% of the VG +# +# To run: +# 1. Source your AWS credentials (make sure it's the corresponding AWS account) into your environment +# export AWS_ACCESS_KEY_ID='XXXXX' +# export AWS_SECRET_ACCESS_KEY='XXXXXX' +# +# 2. run the playbook: +# ansible-playbook -e 'cli_tag_name=<tag-name>' grow_docker_vg.yml +# +# Example: +# ansible-playbook -e 'cli_tag_name=ops-compute-12345' grow_docker_vg.yml +# +# Notes: +# * By default this will do a 55GB GP2 volume. The can be overidden with the "-e 'cli_volume_size=100'" variable +# * This does a GP2 by default. Support for Provisioned IOPS has not been added +# * This will assign the new volume to /dev/xvdc. This is not variablized, yet. +# * This can be done with NO downtime on the host +# * This playbook assumes that there is a Logical Volume that is installed and called "docker-pool". This is +# the LV that gets created via the "docker-storage-setup" command +# + +- name: Grow the docker volume group + hosts: "tag_Name_{{ cli_tag_name }}" + user: root + connection: ssh + gather_facts: no + + vars: + cli_volume_type: gp2 + cli_volume_size: 55 +# cli_volume_iops: "{{ 30 * cli_volume_size }}" + + pre_tasks: + - fail: + msg: "This playbook requires {{item}} to be set." + when: "{{ item }} is not defined or {{ item }} == ''" + with_items: + - cli_tag_name + - cli_volume_size + + - debug: + var: hosts + + - name: start docker + service: + name: docker + state: started + + - name: Determine if Storage Driver (docker info) is devicemapper + shell: docker info | grep 'Storage Driver:.*devicemapper' + register: device_mapper_check + ignore_errors: yes + + - debug: + var: device_mapper_check + + - name: fail if we don't detect devicemapper + fail: + msg: The "Storage Driver" in "docker info" is not set to "devicemapper"! Please investigate manually. + when: device_mapper_check.rc == 1 + + # docker-storage-setup creates a docker-pool as the lvm. I am using docker-pool lvm to test + # and find the volume group. + - name: Attempt to find the Volume Group that docker is using + shell: lvs | grep docker-pool | awk '{print $2}' + register: docker_vg_name + ignore_errors: yes + + - debug: + var: docker_vg_name + + - name: fail if we don't find a docker volume group + fail: + msg: Unable to find docker volume group. Please investigate manually. + when: docker_vg_name.stdout_lines|length != 1 + + # docker-storage-setup creates a docker-pool as the lvm. I am using docker-pool lvm to test + # and find the physical volume. + - name: Attempt to find the Phyisical Volume that docker is using + shell: "pvs | grep {{ docker_vg_name.stdout }} | awk '{print $1}'" + register: docker_pv_name + ignore_errors: yes + + - debug: + var: docker_pv_name + + - name: fail if we don't find a docker physical volume + fail: + msg: Unable to find docker physical volume. Please investigate manually. + when: docker_pv_name.stdout_lines|length != 1 + + + - name: get list of volumes from AWS + delegate_to: localhost + ec2_vol: + state: list + instance: "{{ ec2_id }}" + region: "{{ ec2_region }}" + register: attached_volumes + + - debug: var=attached_volumes + + - name: get volume id of current docker volume + set_fact: + old_docker_volume_id: "{{ attached_volumes.volumes | translate_volume_name(docker_pv_name.stdout) }}" + + - debug: var=old_docker_volume_id + + - name: check to see if /dev/xvdc exists + command: test -e /dev/xvdc + register: xvdc_check + ignore_errors: yes + + - debug: var=xvdc_check + + - name: fail if /dev/xvdc already exists + fail: + msg: /dev/xvdc already exists. Please investigate + when: xvdc_check.rc == 0 + + - name: Create a volume and attach it + delegate_to: localhost + ec2_vol: + state: present + instance: "{{ ec2_id }}" + region: "{{ ec2_region }}" + volume_size: "{{ cli_volume_size | default(30, True)}}" + volume_type: "{{ cli_volume_type }}" + device_name: /dev/xvdc + register: create_volume + + - debug: var=create_volume + + - name: Fail when problems creating volumes and attaching + fail: + msg: "Failed to create or attach volume msg: {{ create_volume.msg }}" + when: create_volume.msg is defined + + - name: tag the vol with a name + delegate_to: localhost + ec2_tag: region={{ ec2_region }} resource={{ create_volume.volume_id }} + args: + tags: + Name: "{{ ec2_tag_Name }}" + env: "{{ ec2_tag_environment }}" + register: voltags + + - name: check for attached drive + command: test -b /dev/xvdc + register: attachment_check + until: attachment_check.rc == 0 + retries: 30 + delay: 2 + + - name: partition the new drive and make it lvm + command: parted /dev/xvdc --script -- mklabel msdos mkpart primary 0% 100% set 1 lvm + + - name: pvcreate /dev/xvdc + command: pvcreate /dev/xvdc1 + + - name: Extend the docker volume group + command: vgextend "{{ docker_vg_name.stdout }}" /dev/xvdc1 + + - name: pvmove onto new volume + command: "pvmove {{ docker_pv_name.stdout }} /dev/xvdc1" + async: 43200 + poll: 10 + + - name: Remove the old docker drive from the volume group + command: "vgreduce {{ docker_vg_name.stdout }} {{ docker_pv_name.stdout }}" + + - name: Remove the pv from the old drive + command: "pvremove {{ docker_pv_name.stdout }}" + + - name: Extend the docker lvm + command: "lvextend -l '90%VG' /dev/{{ docker_vg_name.stdout }}/docker-pool" + + - name: detach old docker volume + delegate_to: localhost + ec2_vol: + region: "{{ ec2_region }}" + id: "{{ old_docker_volume_id }}" + instance: None + + - name: tag the old vol valid label + delegate_to: localhost + ec2_tag: region={{ ec2_region }} resource={{old_docker_volume_id}} + args: + tags: + Name: "{{ ec2_tag_Name }} REMOVE ME" + register: voltags + + - name: Update the /etc/sysconfig/docker-storage-setup with new device + lineinfile: + dest: /etc/sysconfig/docker-storage-setup + regexp: ^DEVS= + line: DEVS=/dev/xvdc diff --git a/playbooks/adhoc/s3_registry/s3_registry.j2 b/playbooks/adhoc/s3_registry/s3_registry.j2 new file mode 100644 index 000000000..acfa89515 --- /dev/null +++ b/playbooks/adhoc/s3_registry/s3_registry.j2 @@ -0,0 +1,20 @@ +version: 0.1 +log: + level: debug +http: + addr: :5000 +storage: + cache: + layerinfo: inmemory + s3: + accesskey: {{ aws_access_key }} + secretkey: {{ aws_secret_key }} + region: us-east-1 + bucket: {{ clusterid }}-docker + encrypt: true + secure: true + v4auth: true + rootdirectory: /registry +middleware: + repository: + - name: openshift diff --git a/playbooks/adhoc/s3_registry/s3_registry.yml b/playbooks/adhoc/s3_registry/s3_registry.yml new file mode 100644 index 000000000..5dc1abf17 --- /dev/null +++ b/playbooks/adhoc/s3_registry/s3_registry.yml @@ -0,0 +1,61 @@ +--- +# This playbook creates an S3 bucket named after your cluster and configures the docker-registry service to use the bucket as its backend storage. +# Usage: +# ansible-playbook s3_registry.yml -e clusterid="mycluster" +# +# The AWS access/secret keys should be the keys of a separate user (not your main user), containing only the necessary S3 access role. +# The 'clusterid' is the short name of your cluster. + +- hosts: security_group_{{ clusterid }}_master + remote_user: root + gather_facts: False + + vars: + aws_access_key: "{{ lookup('env', 'AWS_ACCESS_KEY_ID') }}" + aws_secret_key: "{{ lookup('env', 'AWS_SECRET_ACCESS_KEY') }}" + tasks: + + - name: Check for AWS creds + fail: + msg: "Couldn't find {{ item }} creds in ENV" + when: "{{ item }} == ''" + with_items: + - aws_access_key + - aws_secret_key + + - name: Create S3 bucket + local_action: + module: s3 bucket="{{ clusterid }}-docker" mode=create + + - name: Generate docker registry config + template: src="s3_registry.j2" dest="/root/config.yml" owner=root mode=0600 + + - name: Determine if new secrets are needed + command: oc get secrets + register: secrets + + - name: Create registry secrets + command: oc secrets new dockerregistry /root/config.yml + when: "'dockerregistry' not in secrets.stdout" + + - name: Determine if service account contains secrets + command: oc describe serviceaccount/registry + register: serviceaccount + + - name: Add secrets to registry service account + command: oc secrets add serviceaccount/registry secrets/dockerregistry + when: "'dockerregistry' not in serviceaccount.stdout" + + - name: Determine if deployment config contains secrets + command: oc volume dc/docker-registry --list + register: dc + + - name: Add secrets to registry deployment config + command: oc volume dc/docker-registry --add --name=dockersecrets -m /etc/registryconfig --type=secret --secret-name=dockerregistry + when: "'dockersecrets' not in dc.stdout" + + - name: Scale up registry + command: oc scale --replicas=1 dc/docker-registry + + - name: Delete temporary config file + file: path=/root/config.yml state=absent diff --git a/playbooks/adhoc/upgrades/README.md b/playbooks/adhoc/upgrades/README.md new file mode 100644 index 000000000..6de8a970f --- /dev/null +++ b/playbooks/adhoc/upgrades/README.md @@ -0,0 +1,21 @@ +# [NOTE] +This playbook will re-run installation steps overwriting any local +modifications. You should ensure that your inventory has been updated with any +modifications you've made after your initial installation. If you find any items +that cannot be configured via ansible please open an issue at +https://github.com/openshift/openshift-ansible + +# Overview +This playbook is available as a technical preview. It currently performs the +following steps. + + * Upgrade and restart master services + * Upgrade and restart node services + * Applies latest configuration by re-running the installation playbook + * Applies the latest cluster policies + * Updates the default router if one exists + * Updates the default registry if one exists + * Updates image streams and quickstarts + +# Usage +ansible-playbook -i ~/ansible-inventory openshift-ansible/playbooks/adhoc/upgrades/upgrade.yml diff --git a/playbooks/adhoc/upgrades/filter_plugins b/playbooks/adhoc/upgrades/filter_plugins new file mode 120000 index 000000000..b0b7a3414 --- /dev/null +++ b/playbooks/adhoc/upgrades/filter_plugins @@ -0,0 +1 @@ +../../../filter_plugins/
\ No newline at end of file diff --git a/playbooks/adhoc/upgrades/lookup_plugins b/playbooks/adhoc/upgrades/lookup_plugins new file mode 120000 index 000000000..73cafffe5 --- /dev/null +++ b/playbooks/adhoc/upgrades/lookup_plugins @@ -0,0 +1 @@ +../../../lookup_plugins/
\ No newline at end of file diff --git a/playbooks/adhoc/upgrades/roles b/playbooks/adhoc/upgrades/roles new file mode 120000 index 000000000..e2b799b9d --- /dev/null +++ b/playbooks/adhoc/upgrades/roles @@ -0,0 +1 @@ +../../../roles/
\ No newline at end of file diff --git a/playbooks/adhoc/upgrades/upgrade.yml b/playbooks/adhoc/upgrades/upgrade.yml new file mode 100644 index 000000000..e666f0472 --- /dev/null +++ b/playbooks/adhoc/upgrades/upgrade.yml @@ -0,0 +1,115 @@ +--- +- name: Re-Run cluster configuration to apply latest configuration changes + include: ../../common/openshift-cluster/config.yml + vars: + g_etcd_group: "{{ 'etcd' }}" + g_masters_group: "{{ 'masters' }}" + g_nodes_group: "{{ 'nodes' }}" + openshift_cluster_id: "{{ cluster_id | default('default') }}" + openshift_deployment_type: "{{ deployment_type }}" + +- name: Upgrade masters + hosts: masters + vars: + openshift_version: "{{ openshift_pkg_version | default('') }}" + tasks: + - name: Upgrade master packages + yum: pkg={{ openshift.common.service_type }}-master{{ openshift_version }} state=latest + - name: Restart master services + service: name="{{ openshift.common.service_type}}-master" state=restarted + +- name: Upgrade nodes + hosts: nodes + vars: + openshift_version: "{{ openshift_pkg_version | default('') }}" + tasks: + - name: Upgrade node packages + yum: pkg={{ openshift.common.service_type }}-node{{ openshift_version }} state=latest + - name: Restart node services + service: name="{{ openshift.common.service_type }}-node" state=restarted + +- name: Determine new master version + hosts: oo_first_master + tasks: + - name: Determine new version + command: > + rpm -q --queryformat '%{version}' {{ openshift.common.service_type }}-master + register: _new_version + +- name: Ensure AOS 3.0.2 or Origin 1.0.6 + hosts: oo_first_master + tasks: + fail: This playbook requires Origin 1.0.6 or Atomic OpenShift 3.0.2 or later + when: _new_version.stdout < 1.0.6 or (_new_version.stdout >= 3.0 and _new_version.stdout < 3.0.2) + +- name: Update cluster policy + hosts: oo_first_master + tasks: + - name: oadm policy reconcile-cluster-roles --confirm + command: > + {{ openshift.common.admin_binary}} --config={{ openshift.common.config_base }}/master/admin.kubeconfig + policy reconcile-cluster-roles --confirm + +- name: Upgrade default router + hosts: oo_first_master + vars: + - router_image: "{{ openshift.master.registry_url | replace( '${component}', 'haproxy-router' ) | replace ( '${version}', 'v' + _new_version.stdout ) }}" + - oc_cmd: "{{ openshift.common.client_binary }} --config={{ openshift.common.config_base }}/master/admin.kubeconfig" + tasks: + - name: Check for default router + command: > + {{ oc_cmd }} get -n default dc/router + register: _default_router + failed_when: false + changed_when: false + - name: Check for allowHostNetwork and allowHostPorts + when: _default_router.rc == 0 + shell: > + {{ oc_cmd }} get -o yaml scc/privileged | /usr/bin/grep -e allowHostPorts -e allowHostNetwork + register: _scc + - name: Grant allowHostNetwork and allowHostPorts + when: + - _default_router.rc == 0 + - "'false' in _scc.stdout" + command: > + {{ oc_cmd }} patch scc/privileged -p '{"allowHostPorts":true,"allowHostNetwork":true}' --loglevel=9 + - name: Update deployment config to 1.0.4/3.0.1 spec + when: _default_router.rc == 0 + command: > + {{ oc_cmd }} patch dc/router -p + '{"spec":{"strategy":{"rollingParams":{"updatePercent":-10},"spec":{"serviceAccount":"router","serviceAccountName":"router"}}}}' + - name: Switch to hostNetwork=true + when: _default_router.rc == 0 + command: > + {{ oc_cmd }} patch dc/router -p '{"spec":{"template":{"spec":{"hostNetwork":true}}}}' + - name: Update router image to current version + when: _default_router.rc == 0 + command: > + {{ oc_cmd }} patch dc/router -p + '{"spec":{"template":{"spec":{"containers":[{"name":"router","image":"{{ router_image }}"}]}}}}' + +- name: Upgrade default + hosts: oo_first_master + vars: + - registry_image: "{{ openshift.master.registry_url | replace( '${component}', 'docker-registry' ) | replace ( '${version}', 'v' + _new_version.stdout ) }}" + - oc_cmd: "{{ openshift.common.client_binary }} --config={{ openshift.common.config_base }}/master/admin.kubeconfig" + tasks: + - name: Check for default registry + command: > + {{ oc_cmd }} get -n default dc/docker-registry + register: _default_registry + failed_when: false + changed_when: false + - name: Update registry image to current version + when: _default_registry.rc == 0 + command: > + {{ oc_cmd }} patch dc/docker-registry -p + '{"spec":{"template":{"spec":{"containers":[{"name":"registry","image":"{{ registry_image }}"}]}}}}' + +- name: Update image streams and templates + hosts: oo_first_master + vars: + openshift_examples_import_command: "update" + openshift_deployment_type: "{{ deployment_type }}" + roles: + - openshift_examples |