Cleaned configuration for PDV infrastructure (incomplete) integrated with my Conky monitoring scriptsHEADmaster

14 files changed, 2802 insertions, 0 deletions

diff --git a/config/old/cgi.cfg b/config/old/cgi.cfg
new file mode 100644
index 0000000..68e028b
--- /dev/null
+++ b/config/old/cgi.cfg
@@ -0,0 +1,357 @@
+#################################################################
+#
+# CGI.CFG - Sample CGI Configuration File for Nagios 3.3.1
+#
+# Last Modified: 06-17-2009
+#
+#################################################################
+
+
+# MAIN CONFIGURATION FILE
+# This tells the CGIs where to find your main configuration file.
+# The CGIs will read the main and host config files for any other
+# data they might need.
+
+main_config_file=/etc/nagios/nagios.cfg
+
+
+
+# PHYSICAL HTML PATH
+# This is the path where the HTML files for Nagios reside.  This
+# value is used to locate the logo images needed by the statusmap
+# and statuswrl CGIs.
+
+physical_html_path=/usr/share/nagios
+
+
+
+# URL HTML PATH
+# This is the path portion of the URL that corresponds to the
+# physical location of the Nagios HTML files (as defined above).
+# This value is used by the CGIs to locate the online documentation
+# and graphics.  If you access the Nagios pages with an URL like
+# http://www.myhost.com/nagios, this value should be '/nagios'
+# (without the quotes).
+
+url_html_path=/nagios
+
+
+
+# CONTEXT-SENSITIVE HELP
+# This option determines whether or not a context-sensitive
+# help icon will be displayed for most of the CGIs.
+# Values: 0 = disables context-sensitive help
+#         1 = enables context-sensitive help
+
+show_context_help=0
+
+
+
+# PENDING STATES OPTION
+# This option determines what states should be displayed in the web
+# interface for hosts/services that have not yet been checked.
+# Values: 0 = leave hosts/services that have not been check yet in their original state
+#         1 = mark hosts/services that have not been checked yet as PENDING
+
+use_pending_states=1
+
+
+
+
+# AUTHENTICATION USAGE
+# This option controls whether or not the CGIs will use any 
+# authentication when displaying host and service information, as
+# well as committing commands to Nagios for processing.  
+#
+# Read the HTML documentation to learn how the authorization works!
+#
+# NOTE: It is a really *bad* idea to disable authorization, unless
+# you plan on removing the command CGI (cmd.cgi)!  Failure to do
+# so will leave you wide open to kiddies messing with Nagios and
+# possibly hitting you with a denial of service attack by filling up
+# your drive by continuously writing to your command file!
+#
+# Setting this value to 0 will cause the CGIs to *not* use
+# authentication (bad idea), while any other value will make them
+# use the authentication functions (the default).
+
+use_authentication=1
+
+
+
+
+# x509 CERT AUTHENTICATION
+# When enabled, this option allows you to use x509 cert (SSL)
+# authentication in the CGIs.  This is an advanced option and should
+# not be enabled unless you know what you're doing.
+
+use_ssl_authentication=0
+
+
+
+
+# DEFAULT USER
+# Setting this variable will define a default user name that can
+# access pages without authentication.  This allows people within a
+# secure domain (i.e., behind a firewall) to see the current status
+# without authenticating.  You may want to use this to avoid basic
+# authentication if you are not using a secure server since basic
+# authentication transmits passwords in the clear.
+#
+# Important:  Do not define a default username unless you are
+# running a secure web server and are sure that everyone who has
+# access to the CGIs has been authenticated in some manner!  If you
+# define this variable, anyone who has not authenticated to the web
+# server will inherit all rights you assign to this user!
+ 
+default_user_name=guest
+
+
+
+# SYSTEM/PROCESS INFORMATION ACCESS
+# This option is a comma-delimited list of all usernames that
+# have access to viewing the Nagios process information as
+# provided by the Extended Information CGI (extinfo.cgi).  By
+# default, *no one* has access to this unless you choose to
+# not use authorization.  You may use an asterisk (*) to
+# authorize any user who has authenticated to the web server.
+
+authorized_for_system_information=*
+
+
+
+# CONFIGURATION INFORMATION ACCESS
+# This option is a comma-delimited list of all usernames that
+# can view ALL configuration information (hosts, commands, etc).
+# By default, users can only view configuration information
+# for the hosts and services they are contacts for. You may use
+# an asterisk (*) to authorize any user who has authenticated
+# to the web server.
+
+authorized_for_configuration_information=*
+
+
+
+# SYSTEM/PROCESS COMMAND ACCESS
+# This option is a comma-delimited list of all usernames that
+# can issue shutdown and restart commands to Nagios via the
+# command CGI (cmd.cgi).  Users in this list can also change
+# the program mode to active or standby. By default, *no one*
+# has access to this unless you choose to not use authorization.
+# You may use an asterisk (*) to authorize any user who has
+# authenticated to the web server.
+
+authorized_for_system_commands=*
+
+
+
+# GLOBAL HOST/SERVICE VIEW ACCESS
+# These two options are comma-delimited lists of all usernames that
+# can view information for all hosts and services that are being
+# monitored.  By default, users can only view information
+# for hosts or services that they are contacts for (unless you
+# you choose to not use authorization). You may use an asterisk (*)
+# to authorize any user who has authenticated to the web server.
+
+
+authorized_for_all_services=*
+authorized_for_all_hosts=*
+
+
+
+# GLOBAL HOST/SERVICE COMMAND ACCESS
+# These two options are comma-delimited lists of all usernames that
+# can issue host or service related commands via the command
+# CGI (cmd.cgi) for all hosts and services that are being monitored. 
+# By default, users can only issue commands for hosts or services 
+# that they are contacts for (unless you you choose to not use 
+# authorization).  You may use an asterisk (*) to authorize any
+# user who has authenticated to the web server.
+
+authorized_for_all_service_commands=*
+authorized_for_all_host_commands=*
+
+
+
+# READ-ONLY USERS
+# A comma-delimited list of usernames that have read-only rights in
+# the CGIs.  This will block any service or host commands normally shown
+# on the extinfo CGI pages.  It will also block comments from being shown
+# to read-only users.
+
+authorized_for_read_only=guest
+
+
+
+
+# STATUSMAP BACKGROUND IMAGE
+# This option allows you to specify an image to be used as a 
+# background in the statusmap CGI.  It is assumed that the image
+# resides in the HTML images path (i.e. /usr/local/nagios/share/images).
+# This path is automatically determined by appending "/images"
+# to the path specified by the 'physical_html_path' directive.
+# Note:  The image file may be in GIF, PNG, JPEG, or GD2 format.
+# However, I recommend that you convert your image to GD2 format
+# (uncompressed), as this will cause less CPU load when the CGI
+# generates the image.
+
+#statusmap_background_image=smbackground.gd2
+
+
+
+
+# STATUSMAP TRANSPARENCY INDEX COLOR
+# These options set the r,g,b values of the background color used the statusmap CGI,
+# so normal browsers that can't show real png transparency set the desired color as
+# a background color instead (to make it look pretty).  
+# Defaults to white: (R,G,B) = (255,255,255).
+
+#color_transparency_index_r=255
+#color_transparency_index_g=255
+#color_transparency_index_b=255
+
+
+
+
+# DEFAULT STATUSMAP LAYOUT METHOD
+# This option allows you to specify the default layout method
+# the statusmap CGI should use for drawing hosts.  If you do
+# not use this option, the default is to use user-defined
+# coordinates.  Valid options are as follows:
+#	0 = User-defined coordinates
+#	1 = Depth layers
+#       2 = Collapsed tree
+#       3 = Balanced tree
+#       4 = Circular
+#       5 = Circular (Marked Up)
+
+default_statusmap_layout=5
+
+
+
+# DEFAULT STATUSWRL LAYOUT METHOD
+# This option allows you to specify the default layout method
+# the statuswrl (VRML) CGI should use for drawing hosts.  If you
+# do not use this option, the default is to use user-defined
+# coordinates.  Valid options are as follows:
+#	0 = User-defined coordinates
+#       2 = Collapsed tree
+#       3 = Balanced tree
+#       4 = Circular
+
+default_statuswrl_layout=4
+
+
+
+# STATUSWRL INCLUDE
+# This option allows you to include your own objects in the 
+# generated VRML world.  It is assumed that the file
+# resides in the HTML path (i.e. /usr/local/nagios/share).
+
+#statuswrl_include=myworld.wrl
+
+
+
+# PING SYNTAX
+# This option determines what syntax should be used when
+# attempting to ping a host from the WAP interface (using
+# the statuswml CGI.  You must include the full path to
+# the ping binary, along with all required options.  The
+# $HOSTADDRESS$ macro is substituted with the address of
+# the host before the command is executed.
+# Please note that the syntax for the ping binary is
+# notorious for being different on virtually ever *NIX
+# OS and distribution, so you may have to tweak this to
+# work on your system.
+
+ping_syntax=/bin/ping -n -U -c 5 $HOSTADDRESS$
+
+
+
+# REFRESH RATE
+# This option allows you to specify the refresh rate in seconds
+# of various CGIs (status, statusmap, extinfo, and outages).  
+
+refresh_rate=90
+
+
+
+# ESCAPE HTML TAGS
+# This option determines whether HTML tags in host and service
+# status output is escaped in the web interface.  If enabled,
+# your plugin output will not be able to contain clickable links.
+
+escape_html_tags=1
+
+
+
+
+# SOUND OPTIONS
+# These options allow you to specify an optional audio file
+# that should be played in your browser window when there are
+# problems on the network.  The audio files are used only in
+# the status CGI.  Only the sound for the most critical problem
+# will be played.  Order of importance (higher to lower) is as
+# follows: unreachable hosts, down hosts, critical services,
+# warning services, and unknown services. If there are no
+# visible problems, the sound file optionally specified by
+# 'normal_sound' variable will be played.
+#
+#
+# <varname>=<sound_file>
+#
+# Note: All audio files must be placed in the /media subdirectory
+# under the HTML path (i.e. /usr/local/nagios/share/media/).
+
+#host_unreachable_sound=hostdown.wav
+#host_down_sound=hostdown.wav
+#service_critical_sound=critical.wav
+#service_warning_sound=warning.wav
+#service_unknown_sound=warning.wav
+#normal_sound=noproblem.wav
+
+
+
+# URL TARGET FRAMES
+# These options determine the target frames in which notes and 
+# action URLs will open.
+
+action_url_target=_blank
+notes_url_target=_blank
+
+
+
+
+# LOCK AUTHOR NAMES OPTION
+# This option determines whether users can change the author name 
+# when submitting comments, scheduling downtime.  If disabled, the 
+# author names will be locked into their contact name, as defined in Nagios.
+# Values: 0 = allow editing author names
+#         1 = lock author names (disallow editing)
+
+lock_author_names=1
+
+
+
+
+# SPLUNK INTEGRATION OPTIONS
+# These options allow you to enable integration with Splunk
+# in the web interface.  If enabled, you'll be presented with
+# "Splunk It" links in various places in the CGIs (log file,
+# alert history, host/service detail, etc).  Useful if you're
+# trying to research why a particular problem occurred.
+# For more information on Splunk, visit http://www.splunk.com/
+
+# This option determines whether the Splunk integration is enabled
+# Values: 0 = disable Splunk integration
+#         1 = enable Splunk integration
+
+#enable_splunk_integration=1
+
+
+# This option should be the URL used to access your instance of Splunk
+
+#splunk_url=http://127.0.0.1:8000/
+
+
+
diff --git a/config/old/htpasswd.users b/config/old/htpasswd.users
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/config/old/htpasswd.users
diff --git a/config/old/nagios.cfg b/config/old/nagios.cfg
new file mode 100644
index 0000000..fb4842d
--- /dev/null
+++ b/config/old/nagios.cfg
@@ -0,0 +1,1325 @@
+##############################################################################
+#
+# NAGIOS.CFG - Sample Main Config File for Nagios 3.3.1
+#
+# Read the documentation for more information on this configuration
+# file.  I've provided some comments here, but things may not be so
+# clear without further explanation.
+#
+# Last Modified: 12-14-2008
+#
+##############################################################################
+
+
+# LOG FILE
+# This is the main log file where service and host events are logged
+# for historical purposes.  This should be the first option specified 
+# in the config file!!!
+
+log_file=/var/log/nagios/nagios.log
+
+
+
+# OBJECT CONFIGURATION FILE(S)
+# These are the object configuration files in which you define hosts,
+# host groups, contacts, contact groups, services, etc.
+# You can split your object definitions across several config files
+# if you wish (as shown below), or keep them all in a single config file.
+
+# You can specify individual object config files as shown below:
+cfg_file=/etc/nagios/objects/commands.cfg
+cfg_file=/etc/nagios/objects/contacts.cfg
+cfg_file=/etc/nagios/objects/timeperiods.cfg
+cfg_file=/etc/nagios/objects/templates.cfg
+
+# Definitions for monitoring the local (Linux) host
+#cfg_file=/etc/nagios/objects/localhost.cfg
+
+# Definitions for monitoring a Windows machine
+#cfg_file=/etc/nagios/objects/windows.cfg
+
+# Definitions for monitoring a router/switch
+#cfg_file=/etc/nagios/objects/switch.cfg
+
+# Definitions for monitoring a network printer
+#cfg_file=/etc/nagios/objects/printer.cfg
+
+
+# You can also tell Nagios to process all config files (with a .cfg
+# extension) in a particular directory by using the cfg_dir
+# directive as shown below:
+
+cfg_dir=/etc/nagios/servers
+#cfg_dir=/etc/nagios/printers
+#cfg_dir=/etc/nagios/switches
+#cfg_dir=/etc/nagios/routers
+
+
+
+
+# OBJECT CACHE FILE
+# This option determines where object definitions are cached when
+# Nagios starts/restarts.  The CGIs read object definitions from 
+# this cache file (rather than looking at the object config files
+# directly) in order to prevent inconsistencies that can occur
+# when the config files are modified after Nagios starts.
+
+object_cache_file=/var/lib/nagios/objects.cache
+
+
+
+# PRE-CACHED OBJECT FILE
+# This options determines the location of the precached object file.
+# If you run Nagios with the -p command line option, it will preprocess
+# your object configuration file(s) and write the cached config to this
+# file.  You can then start Nagios with the -u option to have it read
+# object definitions from this precached file, rather than the standard
+# object configuration files (see the cfg_file and cfg_dir options above).
+# Using a precached object file can speed up the time needed to (re)start 
+# the Nagios process if you've got a large and/or complex configuration.
+# Read the documentation section on optimizing Nagios to find our more
+# about how this feature works.
+
+precached_object_file=/var/lib/nagios/objects.precache
+
+
+
+# RESOURCE FILE
+# This is an optional resource file that contains $USERx$ macro
+# definitions. Multiple resource files can be specified by using
+# multiple resource_file definitions.  The CGIs will not attempt to
+# read the contents of resource files, so information that is
+# considered to be sensitive (usernames, passwords, etc) can be
+# defined as macros in this file and restrictive permissions (600)
+# can be placed on this file.
+
+resource_file=/etc/nagios/resource.cfg
+
+
+
+# STATUS FILE
+# This is where the current status of all monitored services and
+# hosts is stored.  Its contents are read and processed by the CGIs.
+# The contents of the status file are deleted every time Nagios
+#  restarts.
+
+status_file=/var/lib/nagios/status.dat
+
+
+
+# STATUS FILE UPDATE INTERVAL
+# This option determines the frequency (in seconds) that
+# Nagios will periodically dump program, host, and 
+# service status data.
+
+status_update_interval=10
+
+
+
+# NAGIOS USER
+# This determines the effective user that Nagios should run as.  
+# You can either supply a username or a UID.
+
+nagios_user=nagios
+
+
+
+# NAGIOS GROUP
+# This determines the effective group that Nagios should run as.  
+# You can either supply a group name or a GID.
+
+nagios_group=nagios
+
+
+
+# EXTERNAL COMMAND OPTION
+# This option allows you to specify whether or not Nagios should check
+# for external commands (in the command file defined below).  By default
+# Nagios will *not* check for external commands, just to be on the
+# cautious side.  If you want to be able to use the CGI command interface
+# you will have to enable this.
+# Values: 0 = disable commands, 1 = enable commands
+
+check_external_commands=1
+
+
+
+# EXTERNAL COMMAND CHECK INTERVAL
+# This is the interval at which Nagios should check for external commands.
+# This value works of the interval_length you specify later.  If you leave
+# that at its default value of 60 (seconds), a value of 1 here will cause
+# Nagios to check for external commands every minute.  If you specify a
+# number followed by an "s" (i.e. 15s), this will be interpreted to mean
+# actual seconds rather than a multiple of the interval_length variable.
+# Note: In addition to reading the external command file at regularly 
+# scheduled intervals, Nagios will also check for external commands after
+# event handlers are executed.
+# NOTE: Setting this value to -1 causes Nagios to check the external
+# command file as often as possible.
+
+#command_check_interval=15s
+command_check_interval=-1
+
+
+
+# EXTERNAL COMMAND FILE
+# This is the file that Nagios checks for external command requests.
+# It is also where the command CGI will write commands that are submitted
+# by users, so it must be writeable by the user that the web server
+# is running as (usually 'nobody').  Permissions should be set at the 
+# directory level instead of on the file, as the file is deleted every
+# time its contents are processed.
+
+command_file=/var/spool/nagios/nagios.cmd
+
+
+
+# EXTERNAL COMMAND BUFFER SLOTS
+# This settings is used to tweak the number of items or "slots" that
+# the Nagios daemon should allocate to the buffer that holds incoming 
+# external commands before they are processed.  As external commands 
+# are processed by the daemon, they are removed from the buffer.  
+
+external_command_buffer_slots=4096
+
+
+
+# LOCK FILE
+# This is the lockfile that Nagios will use to store its PID number
+# in when it is running in daemon mode.
+
+lock_file=/var/run/nagios/nagios.pid
+
+
+
+# TEMP FILE
+# This is a temporary file that is used as scratch space when Nagios
+# updates the status log, cleans the comment file, etc.  This file
+# is created, used, and deleted throughout the time that Nagios is
+# running.
+
+temp_file=/var/lib/nagios/nagios.tmp
+
+
+
+# TEMP PATH
+# This is path where Nagios can create temp files for service and
+# host check results, etc.
+
+temp_path=/tmp
+
+
+
+# EVENT BROKER OPTIONS
+# Controls what (if any) data gets sent to the event broker.
+# Values:  0      = Broker nothing
+#         -1      = Broker everything
+#         <other> = See documentation
+
+event_broker_options=-1
+
+
+
+# EVENT BROKER MODULE(S)
+# This directive is used to specify an event broker module that should
+# by loaded by Nagios at startup.  Use multiple directives if you want
+# to load more than one module.  Arguments that should be passed to
+# the module at startup are seperated from the module path by a space.
+#
+#!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+# WARNING !!! WARNING !!! WARNING !!! WARNING !!! WARNING !!! WARNING
+#!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+#
+# Do NOT overwrite modules while they are being used by Nagios or Nagios
+# will crash in a fiery display of SEGFAULT glory.  This is a bug/limitation
+# either in dlopen(), the kernel, and/or the filesystem.  And maybe Nagios...
+#
+# The correct/safe way of updating a module is by using one of these methods:
+#    1. Shutdown Nagios, replace the module file, restart Nagios
+#    2. Delete the original module file, move the new module file into place, restart Nagios
+#
+# Example:
+#
+#   broker_module=<modulepath> [moduleargs]
+
+#broker_module=/somewhere/module1.o
+#broker_module=/somewhere/module2.o arg1 arg2=3 debug=0
+
+
+
+# LOG ROTATION METHOD
+# This is the log rotation method that Nagios should use to rotate
+# the main log file. Values are as follows..
+#	n	= None - don't rotate the log
+#	h	= Hourly rotation (top of the hour)
+#	d	= Daily rotation (midnight every day)
+#	w	= Weekly rotation (midnight on Saturday evening)
+#	m	= Monthly rotation (midnight last day of month)
+
+log_rotation_method=m
+
+
+
+# LOG ARCHIVE PATH
+# This is the directory where archived (rotated) log files should be 
+# placed (assuming you've chosen to do log rotation).
+
+log_archive_path=/var/log/nagios/archives
+
+
+
+# LOGGING OPTIONS
+# If you want messages logged to the syslog facility, as well as the
+# Nagios log file set this option to 1.  If not, set it to 0.
+
+use_syslog=0
+
+
+
+# NOTIFICATION LOGGING OPTION
+# If you don't want notifications to be logged, set this value to 0.
+# If notifications should be logged, set the value to 1.
+
+log_notifications=1
+
+
+
+# SERVICE RETRY LOGGING OPTION
+# If you don't want service check retries to be logged, set this value
+# to 0.  If retries should be logged, set the value to 1.
+
+log_service_retries=1
+
+
+
+# HOST RETRY LOGGING OPTION
+# If you don't want host check retries to be logged, set this value to
+# 0.  If retries should be logged, set the value to 1.
+
+log_host_retries=1
+
+
+
+# EVENT HANDLER LOGGING OPTION
+# If you don't want host and service event handlers to be logged, set
+# this value to 0.  If event handlers should be logged, set the value
+# to 1.
+
+log_event_handlers=1
+
+
+
+# INITIAL STATES LOGGING OPTION
+# If you want Nagios to log all initial host and service states to
+# the main log file (the first time the service or host is checked)
+# you can enable this option by setting this value to 1.  If you
+# are not using an external application that does long term state
+# statistics reporting, you do not need to enable this option.  In
+# this case, set the value to 0.
+
+log_initial_states=0
+
+
+
+# EXTERNAL COMMANDS LOGGING OPTION
+# If you don't want Nagios to log external commands, set this value
+# to 0.  If external commands should be logged, set this value to 1.
+# Note: This option does not include logging of passive service
+# checks - see the option below for controlling whether or not
+# passive checks are logged.
+
+log_external_commands=1
+
+
+
+# PASSIVE CHECKS LOGGING OPTION
+# If you don't want Nagios to log passive host and service checks, set
+# this value to 0.  If passive checks should be logged, set
+# this value to 1.
+
+log_passive_checks=1
+
+
+
+# GLOBAL HOST AND SERVICE EVENT HANDLERS
+# These options allow you to specify a host and service event handler
+# command that is to be run for every host or service state change.
+# The global event handler is executed immediately prior to the event
+# handler that you have optionally specified in each host or
+# service definition. The command argument is the short name of a
+# command definition that you define in your host configuration file.
+# Read the HTML docs for more information.
+
+#global_host_event_handler=somecommand
+#global_service_event_handler=somecommand
+
+
+
+# SERVICE INTER-CHECK DELAY METHOD
+# This is the method that Nagios should use when initially
+# "spreading out" service checks when it starts monitoring.  The
+# default is to use smart delay calculation, which will try to
+# space all service checks out evenly to minimize CPU load.
+# Using the dumb setting will cause all checks to be scheduled
+# at the same time (with no delay between them)!  This is not a
+# good thing for production, but is useful when testing the
+# parallelization functionality.
+#	n	= None - don't use any delay between checks
+#	d	= Use a "dumb" delay of 1 second between checks
+#	s	= Use "smart" inter-check delay calculation
+#       x.xx    = Use an inter-check delay of x.xx seconds
+
+service_inter_check_delay_method=s
+
+
+
+# MAXIMUM SERVICE CHECK SPREAD
+# This variable determines the timeframe (in minutes) from the
+# program start time that an initial check of all services should
+# be completed.  Default is 30 minutes.
+
+max_service_check_spread=30
+
+
+
+# SERVICE CHECK INTERLEAVE FACTOR
+# This variable determines how service checks are interleaved.
+# Interleaving the service checks allows for a more even
+# distribution of service checks and reduced load on remote
+# hosts.  Setting this value to 1 is equivalent to how versions
+# of Nagios previous to 0.0.5 did service checks.  Set this
+# value to s (smart) for automatic calculation of the interleave
+# factor unless you have a specific reason to change it.
+#       s       = Use "smart" interleave factor calculation
+#       x       = Use an interleave factor of x, where x is a
+#                 number greater than or equal to 1.
+
+service_interleave_factor=s
+
+
+
+# HOST INTER-CHECK DELAY METHOD
+# This is the method that Nagios should use when initially
+# "spreading out" host checks when it starts monitoring.  The
+# default is to use smart delay calculation, which will try to
+# space all host checks out evenly to minimize CPU load.
+# Using the dumb setting will cause all checks to be scheduled
+# at the same time (with no delay between them)!
+#	n	= None - don't use any delay between checks
+#	d	= Use a "dumb" delay of 1 second between checks
+#	s	= Use "smart" inter-check delay calculation
+#       x.xx    = Use an inter-check delay of x.xx seconds
+
+host_inter_check_delay_method=s
+
+
+
+# MAXIMUM HOST CHECK SPREAD
+# This variable determines the timeframe (in minutes) from the
+# program start time that an initial check of all hosts should
+# be completed.  Default is 30 minutes.
+
+max_host_check_spread=30
+
+
+
+# MAXIMUM CONCURRENT SERVICE CHECKS
+# This option allows you to specify the maximum number of 
+# service checks that can be run in parallel at any given time.
+# Specifying a value of 1 for this variable essentially prevents
+# any service checks from being parallelized.  A value of 0
+# will not restrict the number of concurrent checks that are
+# being executed.
+
+max_concurrent_checks=0
+
+
+
+# HOST AND SERVICE CHECK REAPER FREQUENCY
+# This is the frequency (in seconds!) that Nagios will process
+# the results of host and service checks.
+
+check_result_reaper_frequency=10
+
+
+
+
+# MAX CHECK RESULT REAPER TIME
+# This is the max amount of time (in seconds) that  a single
+# check result reaper event will be allowed to run before 
+# returning control back to Nagios so it can perform other
+# duties.
+
+max_check_result_reaper_time=30
+
+
+
+
+# CHECK RESULT PATH
+# This is directory where Nagios stores the results of host and
+# service checks that have not yet been processed.
+#
+# Note: Make sure that only one instance of Nagios has access
+# to this directory!  
+
+check_result_path=/var/spool/nagios
+
+
+
+
+# MAX CHECK RESULT FILE AGE
+# This option determines the maximum age (in seconds) which check
+# result files are considered to be valid.  Files older than this 
+# threshold will be mercilessly deleted without further processing.
+
+max_check_result_file_age=3600
+
+
+
+
+# CACHED HOST CHECK HORIZON
+# This option determines the maximum amount of time (in seconds)
+# that the state of a previous host check is considered current.
+# Cached host states (from host checks that were performed more
+# recently that the timeframe specified by this value) can immensely
+# improve performance in regards to the host check logic.
+# Too high of a value for this option may result in inaccurate host
+# states being used by Nagios, while a lower value may result in a
+# performance hit for host checks.  Use a value of 0 to disable host
+# check caching.
+
+cached_host_check_horizon=15
+
+
+
+# CACHED SERVICE CHECK HORIZON
+# This option determines the maximum amount of time (in seconds)
+# that the state of a previous service check is considered current.
+# Cached service states (from service checks that were performed more
+# recently that the timeframe specified by this value) can immensely
+# improve performance in regards to predictive dependency checks.
+# Use a value of 0 to disable service check caching.
+
+cached_service_check_horizon=15
+
+
+
+# ENABLE PREDICTIVE HOST DEPENDENCY CHECKS
+# This option determines whether or not Nagios will attempt to execute
+# checks of hosts when it predicts that future dependency logic test
+# may be needed.  These predictive checks can help ensure that your
+# host dependency logic works well.
+# Values:
+#  0 = Disable predictive checks
+#  1 = Enable predictive checks (default)
+
+enable_predictive_host_dependency_checks=1
+
+
+
+# ENABLE PREDICTIVE SERVICE DEPENDENCY CHECKS
+# This option determines whether or not Nagios will attempt to execute
+# checks of service when it predicts that future dependency logic test
+# may be needed.  These predictive checks can help ensure that your
+# service dependency logic works well.
+# Values:
+#  0 = Disable predictive checks
+#  1 = Enable predictive checks (default)
+
+enable_predictive_service_dependency_checks=1
+
+
+
+# SOFT STATE DEPENDENCIES
+# This option determines whether or not Nagios will use soft state 
+# information when checking host and service dependencies. Normally 
+# Nagios will only use the latest hard host or service state when 
+# checking dependencies. If you want it to use the latest state (regardless
+# of whether its a soft or hard state type), enable this option. 
+# Values:
+#  0 = Don't use soft state dependencies (default) 
+#  1 = Use soft state dependencies 
+
+soft_state_dependencies=0
+
+
+
+# TIME CHANGE ADJUSTMENT THRESHOLDS
+# These options determine when Nagios will react to detected changes
+# in system time (either forward or backwards).
+
+#time_change_threshold=900
+
+
+
+# AUTO-RESCHEDULING OPTION
+# This option determines whether or not Nagios will attempt to
+# automatically reschedule active host and service checks to
+# "smooth" them out over time.  This can help balance the load on
+# the monitoring server.  
+# WARNING: THIS IS AN EXPERIMENTAL FEATURE - IT CAN DEGRADE
+# PERFORMANCE, RATHER THAN INCREASE IT, IF USED IMPROPERLY
+
+auto_reschedule_checks=0
+
+
+
+# AUTO-RESCHEDULING INTERVAL
+# This option determines how often (in seconds) Nagios will
+# attempt to automatically reschedule checks.  This option only
+# has an effect if the auto_reschedule_checks option is enabled.
+# Default is 30 seconds.
+# WARNING: THIS IS AN EXPERIMENTAL FEATURE - IT CAN DEGRADE
+# PERFORMANCE, RATHER THAN INCREASE IT, IF USED IMPROPERLY
+
+auto_rescheduling_interval=30
+
+
+
+# AUTO-RESCHEDULING WINDOW
+# This option determines the "window" of time (in seconds) that
+# Nagios will look at when automatically rescheduling checks.
+# Only host and service checks that occur in the next X seconds
+# (determined by this variable) will be rescheduled. This option
+# only has an effect if the auto_reschedule_checks option is
+# enabled.  Default is 180 seconds (3 minutes).
+# WARNING: THIS IS AN EXPERIMENTAL FEATURE - IT CAN DEGRADE
+# PERFORMANCE, RATHER THAN INCREASE IT, IF USED IMPROPERLY
+
+auto_rescheduling_window=180
+
+
+
+# SLEEP TIME
+# This is the number of seconds to sleep between checking for system
+# events and service checks that need to be run.
+
+sleep_time=0.25
+
+
+
+# TIMEOUT VALUES
+# These options control how much time Nagios will allow various
+# types of commands to execute before killing them off.  Options
+# are available for controlling maximum time allotted for
+# service checks, host checks, event handlers, notifications, the
+# ocsp command, and performance data commands.  All values are in
+# seconds.
+
+# SDS 
+# Enlarged for ADEI & GPU services
+service_check_timeout=300
+# EDS
+host_check_timeout=30
+event_handler_timeout=30
+notification_timeout=30
+ocsp_timeout=5
+perfdata_timeout=5
+
+
+
+# RETAIN STATE INFORMATION
+# This setting determines whether or not Nagios will save state
+# information for services and hosts before it shuts down.  Upon
+# startup Nagios will reload all saved service and host state
+# information before starting to monitor.  This is useful for 
+# maintaining long-term data on state statistics, etc, but will
+# slow Nagios down a bit when it (re)starts.  Since its only
+# a one-time penalty, I think its well worth the additional
+# startup delay.
+
+retain_state_information=1
+
+
+
+# STATE RETENTION FILE
+# This is the file that Nagios should use to store host and
+# service state information before it shuts down.  The state 
+# information in this file is also read immediately prior to
+# starting to monitor the network when Nagios is restarted.
+# This file is used only if the retain_state_information
+# variable is set to 1.
+
+state_retention_file=/var/lib/nagios/retention.dat
+
+
+
+# RETENTION DATA UPDATE INTERVAL
+# This setting determines how often (in minutes) that Nagios
+# will automatically save retention data during normal operation.
+# If you set this value to 0, Nagios will not save retention
+# data at regular interval, but it will still save retention
+# data before shutting down or restarting.  If you have disabled
+# state retention, this option has no effect.
+
+retention_update_interval=60
+
+
+
+# USE RETAINED PROGRAM STATE
+# This setting determines whether or not Nagios will set 
+# program status variables based on the values saved in the
+# retention file.  If you want to use retained program status
+# information, set this value to 1.  If not, set this value
+# to 0.
+
+use_retained_program_state=1
+
+
+
+# USE RETAINED SCHEDULING INFO
+# This setting determines whether or not Nagios will retain
+# the scheduling info (next check time) for hosts and services
+# based on the values saved in the retention file.  If you
+# If you want to use retained scheduling info, set this
+# value to 1.  If not, set this value to 0.
+
+use_retained_scheduling_info=1
+
+
+
+# RETAINED ATTRIBUTE MASKS (ADVANCED FEATURE)
+# The following variables are used to specify specific host and
+# service attributes that should *not* be retained by Nagios during
+# program restarts.
+#
+# The values of the masks are bitwise ANDs of values specified
+# by the "MODATTR_" definitions found in include/common.h.  
+# For example, if you do not want the current enabled/disabled state
+# of flap detection and event handlers for hosts to be retained, you
+# would use a value of 24 for the host attribute mask...
+# MODATTR_EVENT_HANDLER_ENABLED (8) + MODATTR_FLAP_DETECTION_ENABLED (16) = 24
+
+# This mask determines what host attributes are not retained
+retained_host_attribute_mask=0
+
+# This mask determines what service attributes are not retained
+retained_service_attribute_mask=0
+
+# These two masks determine what process attributes are not retained.
+# There are two masks, because some process attributes have host and service
+# options.  For example, you can disable active host checks, but leave active
+# service checks enabled.
+retained_process_host_attribute_mask=0
+retained_process_service_attribute_mask=0
+
+# These two masks determine what contact attributes are not retained.
+# There are two masks, because some contact attributes have host and
+# service options.  For example, you can disable host notifications for
+# a contact, but leave service notifications enabled for them.
+retained_contact_host_attribute_mask=0
+retained_contact_service_attribute_mask=0
+
+
+
+# INTERVAL LENGTH
+# This is the seconds per unit interval as used in the
+# host/contact/service configuration files.  Setting this to 60 means
+# that each interval is one minute long (60 seconds).  Other settings
+# have not been tested much, so your mileage is likely to vary...
+
+interval_length=60
+
+
+
+# CHECK FOR UPDATES
+# This option determines whether Nagios will automatically check to
+# see if new updates (releases) are available.  It is recommend that you
+# enable this option to ensure that you stay on top of the latest critical
+# patches to Nagios.  Nagios is critical to you - make sure you keep it in
+# good shape.  Nagios will check once a day for new updates. Data collected
+# by Nagios Enterprises from the update check is processed in accordance 
+# with our privacy policy - see http://api.nagios.org for details.
+
+check_for_updates=1
+
+
+
+# BARE UPDATE CHECK
+# This option deterines what data Nagios will send to api.nagios.org when
+# it checks for updates.  By default, Nagios will send information on the 
+# current version of Nagios you have installed, as well as an indicator as
+# to whether this was a new installation or not.  Nagios Enterprises uses
+# this data to determine the number of users running specific version of 
+# Nagios.  Enable this option if you do not want this information to be sent.
+
+bare_update_check=0
+
+
+
+# AGGRESSIVE HOST CHECKING OPTION
+# If you don't want to turn on aggressive host checking features, set
+# this value to 0 (the default).  Otherwise set this value to 1 to
+# enable the aggressive check option.  Read the docs for more info
+# on what aggressive host check is or check out the source code in
+# base/checks.c
+
+use_aggressive_host_checking=0
+
+
+
+# SERVICE CHECK EXECUTION OPTION
+# This determines whether or not Nagios will actively execute
+# service checks when it initially starts.  If this option is 
+# disabled, checks are not actively made, but Nagios can still
+# receive and process passive check results that come in.  Unless
+# you're implementing redundant hosts or have a special need for
+# disabling the execution of service checks, leave this enabled!
+# Values: 1 = enable checks, 0 = disable checks
+
+execute_service_checks=1
+
+
+
+# PASSIVE SERVICE CHECK ACCEPTANCE OPTION
+# This determines whether or not Nagios will accept passive
+# service checks results when it initially (re)starts.
+# Values: 1 = accept passive checks, 0 = reject passive checks
+
+accept_passive_service_checks=1
+
+
+
+# HOST CHECK EXECUTION OPTION
+# This determines whether or not Nagios will actively execute
+# host checks when it initially starts.  If this option is 
+# disabled, checks are not actively made, but Nagios can still
+# receive and process passive check results that come in.  Unless
+# you're implementing redundant hosts or have a special need for
+# disabling the execution of host checks, leave this enabled!
+# Values: 1 = enable checks, 0 = disable checks
+
+execute_host_checks=1
+
+
+
+# PASSIVE HOST CHECK ACCEPTANCE OPTION
+# This determines whether or not Nagios will accept passive
+# host checks results when it initially (re)starts.
+# Values: 1 = accept passive checks, 0 = reject passive checks
+
+accept_passive_host_checks=1
+
+
+
+# NOTIFICATIONS OPTION
+# This determines whether or not Nagios will sent out any host or
+# service notifications when it is initially (re)started.
+# Values: 1 = enable notifications, 0 = disable notifications
+
+enable_notifications=1
+
+
+
+# EVENT HANDLER USE OPTION
+# This determines whether or not Nagios will run any host or
+# service event handlers when it is initially (re)started.  Unless
+# you're implementing redundant hosts, leave this option enabled.
+# Values: 1 = enable event handlers, 0 = disable event handlers
+
+enable_event_handlers=1
+
+
+
+# PROCESS PERFORMANCE DATA OPTION
+# This determines whether or not Nagios will process performance
+# data returned from service and host checks.  If this option is
+# enabled, host performance data will be processed using the
+# host_perfdata_command (defined below) and service performance
+# data will be processed using the service_perfdata_command (also
+# defined below).  Read the HTML docs for more information on
+# performance data.
+# Values: 1 = process performance data, 0 = do not process performance data
+
+process_performance_data=0
+
+
+
+# HOST AND SERVICE PERFORMANCE DATA PROCESSING COMMANDS
+# These commands are run after every host and service check is
+# performed.  These commands are executed only if the
+# enable_performance_data option (above) is set to 1.  The command
+# argument is the short name of a command definition that you 
+# define in your host configuration file.  Read the HTML docs for
+# more information on performance data.
+
+#host_perfdata_command=process-host-perfdata
+#service_perfdata_command=process-service-perfdata
+
+
+
+# HOST AND SERVICE PERFORMANCE DATA FILES
+# These files are used to store host and service performance data.
+# Performance data is only written to these files if the
+# enable_performance_data option (above) is set to 1.
+
+#host_perfdata_file=/tmp/host-perfdata
+#service_perfdata_file=/tmp/service-perfdata
+
+
+
+# HOST AND SERVICE PERFORMANCE DATA FILE TEMPLATES
+# These options determine what data is written (and how) to the
+# performance data files.  The templates may contain macros, special
+# characters (\t for tab, \r for carriage return, \n for newline)
+# and plain text.  A newline is automatically added after each write
+# to the performance data file.  Some examples of what you can do are
+# shown below.
+
+#host_perfdata_file_template=[HOSTPERFDATA]\t$TIMET$\t$HOSTNAME$\t$HOSTEXECUTIONTIME$\t$HOSTOUTPUT$\t$HOSTPERFDATA$
+#service_perfdata_file_template=[SERVICEPERFDATA]\t$TIMET$\t$HOSTNAME$\t$SERVICEDESC$\t$SERVICEEXECUTIONTIME$\t$SERVICELATENCY$\t$SERVICEOUTPUT$\t$SERVICEPERFDATA$
+
+
+
+# HOST AND SERVICE PERFORMANCE DATA FILE MODES
+# This option determines whether or not the host and service
+# performance data files are opened in write ("w") or append ("a")
+# mode. If you want to use named pipes, you should use the special
+# pipe ("p") mode which avoid blocking at startup, otherwise you will
+# likely want the defult append ("a") mode.
+
+#host_perfdata_file_mode=a
+#service_perfdata_file_mode=a
+
+
+
+# HOST AND SERVICE PERFORMANCE DATA FILE PROCESSING INTERVAL
+# These options determine how often (in seconds) the host and service
+# performance data files are processed using the commands defined
+# below.  A value of 0 indicates the files should not be periodically
+# processed.
+
+#host_perfdata_file_processing_interval=0
+#service_perfdata_file_processing_interval=0
+
+
+
+# HOST AND SERVICE PERFORMANCE DATA FILE PROCESSING COMMANDS
+# These commands are used to periodically process the host and
+# service performance data files.  The interval at which the
+# processing occurs is determined by the options above.
+
+#host_perfdata_file_processing_command=process-host-perfdata-file
+#service_perfdata_file_processing_command=process-service-perfdata-file
+
+
+
+# OBSESS OVER SERVICE CHECKS OPTION
+# This determines whether or not Nagios will obsess over service
+# checks and run the ocsp_command defined below.  Unless you're
+# planning on implementing distributed monitoring, do not enable
+# this option.  Read the HTML docs for more information on
+# implementing distributed monitoring.
+# Values: 1 = obsess over services, 0 = do not obsess (default)
+
+obsess_over_services=0
+
+
+
+# OBSESSIVE COMPULSIVE SERVICE PROCESSOR COMMAND
+# This is the command that is run for every service check that is
+# processed by Nagios.  This command is executed only if the
+# obsess_over_services option (above) is set to 1.  The command 
+# argument is the short name of a command definition that you
+# define in your host configuration file. Read the HTML docs for
+# more information on implementing distributed monitoring.
+
+#ocsp_command=somecommand
+
+
+
+# OBSESS OVER HOST CHECKS OPTION
+# This determines whether or not Nagios will obsess over host
+# checks and run the ochp_command defined below.  Unless you're
+# planning on implementing distributed monitoring, do not enable
+# this option.  Read the HTML docs for more information on
+# implementing distributed monitoring.
+# Values: 1 = obsess over hosts, 0 = do not obsess (default)
+
+obsess_over_hosts=0
+
+
+
+# OBSESSIVE COMPULSIVE HOST PROCESSOR COMMAND
+# This is the command that is run for every host check that is
+# processed by Nagios.  This command is executed only if the
+# obsess_over_hosts option (above) is set to 1.  The command 
+# argument is the short name of a command definition that you
+# define in your host configuration file. Read the HTML docs for
+# more information on implementing distributed monitoring.
+
+#ochp_command=somecommand
+
+
+
+# TRANSLATE PASSIVE HOST CHECKS OPTION
+# This determines whether or not Nagios will translate
+# DOWN/UNREACHABLE passive host check results into their proper
+# state for this instance of Nagios.  This option is useful
+# if you have distributed or failover monitoring setup.  In
+# these cases your other Nagios servers probably have a different
+# "view" of the network, with regards to the parent/child relationship
+# of hosts.  If a distributed monitoring server thinks a host
+# is DOWN, it may actually be UNREACHABLE from the point of
+# this Nagios instance.  Enabling this option will tell Nagios
+# to translate any DOWN or UNREACHABLE host states it receives
+# passively into the correct state from the view of this server.
+# Values: 1 = perform translation, 0 = do not translate (default)
+
+translate_passive_host_checks=0
+
+
+
+# PASSIVE HOST CHECKS ARE SOFT OPTION
+# This determines whether or not Nagios will treat passive host
+# checks as being HARD or SOFT.  By default, a passive host check
+# result will put a host into a HARD state type.  This can be changed
+# by enabling this option.
+# Values: 0 = passive checks are HARD, 1 = passive checks are SOFT
+
+passive_host_checks_are_soft=0
+
+
+
+# ORPHANED HOST/SERVICE CHECK OPTIONS
+# These options determine whether or not Nagios will periodically 
+# check for orphaned host service checks.  Since service checks are
+# not rescheduled until the results of their previous execution 
+# instance are processed, there exists a possibility that some
+# checks may never get rescheduled.  A similar situation exists for
+# host checks, although the exact scheduling details differ a bit
+# from service checks.  Orphaned checks seem to be a rare
+# problem and should not happen under normal circumstances.
+# If you have problems with service checks never getting
+# rescheduled, make sure you have orphaned service checks enabled.
+# Values: 1 = enable checks, 0 = disable checks
+
+check_for_orphaned_services=1
+check_for_orphaned_hosts=1
+
+
+
+# SERVICE FRESHNESS CHECK OPTION
+# This option determines whether or not Nagios will periodically
+# check the "freshness" of service results.  Enabling this option
+# is useful for ensuring passive checks are received in a timely
+# manner.
+# Values: 1 = enabled freshness checking, 0 = disable freshness checking
+
+check_service_freshness=1
+
+
+
+# SERVICE FRESHNESS CHECK INTERVAL
+# This setting determines how often (in seconds) Nagios will
+# check the "freshness" of service check results.  If you have
+# disabled service freshness checking, this option has no effect.
+
+service_freshness_check_interval=60
+
+
+
+# HOST FRESHNESS CHECK OPTION
+# This option determines whether or not Nagios will periodically
+# check the "freshness" of host results.  Enabling this option
+# is useful for ensuring passive checks are received in a timely
+# manner.
+# Values: 1 = enabled freshness checking, 0 = disable freshness checking
+
+check_host_freshness=0
+
+
+
+# HOST FRESHNESS CHECK INTERVAL
+# This setting determines how often (in seconds) Nagios will
+# check the "freshness" of host check results.  If you have
+# disabled host freshness checking, this option has no effect.
+
+host_freshness_check_interval=60
+
+
+
+
+# ADDITIONAL FRESHNESS THRESHOLD LATENCY
+# This setting determines the number of seconds that Nagios
+# will add to any host and service freshness thresholds that
+# it calculates (those not explicitly specified by the user).
+
+additional_freshness_latency=15
+
+
+
+
+# FLAP DETECTION OPTION
+# This option determines whether or not Nagios will try
+# and detect hosts and services that are "flapping".  
+# Flapping occurs when a host or service changes between
+# states too frequently.  When Nagios detects that a 
+# host or service is flapping, it will temporarily suppress
+# notifications for that host/service until it stops
+# flapping.  Flap detection is very experimental, so read
+# the HTML documentation before enabling this feature!
+# Values: 1 = enable flap detection
+#         0 = disable flap detection (default)
+
+enable_flap_detection=1
+
+
+
+# FLAP DETECTION THRESHOLDS FOR HOSTS AND SERVICES
+# Read the HTML documentation on flap detection for
+# an explanation of what this option does.  This option
+# has no effect if flap detection is disabled.
+
+low_service_flap_threshold=5.0
+high_service_flap_threshold=20.0
+low_host_flap_threshold=5.0
+high_host_flap_threshold=20.0
+
+
+
+# DATE FORMAT OPTION
+# This option determines how short dates are displayed. Valid options
+# include:
+#	us		(MM-DD-YYYY HH:MM:SS)
+#	euro    	(DD-MM-YYYY HH:MM:SS)
+#	iso8601		(YYYY-MM-DD HH:MM:SS)
+#	strict-iso8601	(YYYY-MM-DDTHH:MM:SS)
+#
+
+date_format=us
+
+
+
+
+# TIMEZONE OFFSET
+# This option is used to override the default timezone that this
+# instance of Nagios runs in.  If not specified, Nagios will use
+# the system configured timezone.
+#
+# NOTE: In order to display the correct timezone in the CGIs, you
+# will also need to alter the Apache directives for the CGI path 
+# to include your timezone.  Example:
+#
+#   <Directory "/usr/local/nagios/sbin/">
+#      SetEnv TZ "Australia/Brisbane"
+#      ...
+#   </Directory>
+
+#use_timezone=US/Mountain
+#use_timezone=Australia/Brisbane
+
+
+
+
+# P1.PL FILE LOCATION
+# This value determines where the p1.pl perl script (used by the
+# embedded Perl interpreter) is located.  If you didn't compile
+# Nagios with embedded Perl support, this option has no effect.
+
+p1_file=/usr/lib/nagios/p1.pl
+
+
+
+# EMBEDDED PERL INTERPRETER OPTION
+# This option determines whether or not the embedded Perl interpreter
+# will be enabled during runtime.  This option has no effect if Nagios
+# has not been compiled with support for embedded Perl.
+# Values: 0 = disable interpreter, 1 = enable interpreter
+
+enable_embedded_perl=1
+
+
+
+# EMBEDDED PERL USAGE OPTION
+# This option determines whether or not Nagios will process Perl plugins
+# and scripts with the embedded Perl interpreter if the plugins/scripts
+# do not explicitly indicate whether or not it is okay to do so. Read
+# the HTML documentation on the embedded Perl interpreter for more 
+# information on how this option works.
+
+use_embedded_perl_implicitly=1
+
+
+
+# ILLEGAL OBJECT NAME CHARACTERS
+# This option allows you to specify illegal characters that cannot
+# be used in host names, service descriptions, or names of other
+# object types.
+
+illegal_object_name_chars=`~!$%^&*|'"<>?,()=
+
+
+
+# ILLEGAL MACRO OUTPUT CHARACTERS
+# This option allows you to specify illegal characters that are
+# stripped from macros before being used in notifications, event
+# handlers, etc.  This DOES NOT affect macros used in service or
+# host check commands.
+# The following macros are stripped of the characters you specify:
+#	$HOSTOUTPUT$
+#	$HOSTPERFDATA$
+#	$HOSTACKAUTHOR$
+#	$HOSTACKCOMMENT$
+#	$SERVICEOUTPUT$
+#	$SERVICEPERFDATA$
+#	$SERVICEACKAUTHOR$
+#	$SERVICEACKCOMMENT$
+
+illegal_macro_output_chars=`~$&|'"<>
+
+
+
+# REGULAR EXPRESSION MATCHING
+# This option controls whether or not regular expression matching
+# takes place in the object config files.  Regular expression
+# matching is used to match host, hostgroup, service, and service
+# group names/descriptions in some fields of various object types.
+# Values: 1 = enable regexp matching, 0 = disable regexp matching
+#SDS
+use_regexp_matching=1
+#EDS
+
+
+# "TRUE" REGULAR EXPRESSION MATCHING
+# This option controls whether or not "true" regular expression 
+# matching takes place in the object config files.  This option
+# only has an effect if regular expression matching is enabled
+# (see above).  If this option is DISABLED, regular expression
+# matching only occurs if a string contains wildcard characters
+# (* and ?).  If the option is ENABLED, regexp matching occurs
+# all the time (which can be annoying).
+# Values: 1 = enable true matching, 0 = disable true matching
+
+use_true_regexp_matching=0
+
+
+
+# ADMINISTRATOR EMAIL/PAGER ADDRESSES
+# The email and pager address of a global administrator (likely you).
+# Nagios never uses these values itself, but you can access them by
+# using the $ADMINEMAIL$ and $ADMINPAGER$ macros in your notification
+# commands.
+
+admin_email=nagios@localhost
+admin_pager=pagenagios@localhost
+
+
+
+# DAEMON CORE DUMP OPTION
+# This option determines whether or not Nagios is allowed to create
+# a core dump when it runs as a daemon.  Note that it is generally
+# considered bad form to allow this, but it may be useful for
+# debugging purposes.  Enabling this option doesn't guarantee that
+# a core file will be produced, but that's just life...
+# Values: 1 - Allow core dumps
+#         0 - Do not allow core dumps (default)
+
+daemon_dumps_core=0
+
+
+
+# LARGE INSTALLATION TWEAKS OPTION
+# This option determines whether or not Nagios will take some shortcuts
+# which can save on memory and CPU usage in large Nagios installations.
+# Read the documentation for more information on the benefits/tradeoffs
+# of enabling this option.
+# Values: 1 - Enabled tweaks
+#         0 - Disable tweaks (default)
+
+use_large_installation_tweaks=0
+
+
+
+# ENABLE ENVIRONMENT MACROS
+# This option determines whether or not Nagios will make all standard
+# macros available as environment variables when host/service checks
+# and system commands (event handlers, notifications, etc.) are
+# executed.  Enabling this option can cause performance issues in 
+# large installations, as it will consume a bit more memory and (more
+# importantly) consume more CPU.
+# Values: 1 - Enable environment variable macros (default)
+#         0 - Disable environment variable macros
+
+enable_environment_macros=1
+
+
+
+# CHILD PROCESS MEMORY OPTION
+# This option determines whether or not Nagios will free memory in
+# child processes (processed used to execute system commands and host/
+# service checks).  If you specify a value here, it will override
+# program defaults.
+# Value: 1 - Free memory in child processes
+#        0 - Do not free memory in child processes
+
+#free_child_process_memory=1
+
+
+
+# CHILD PROCESS FORKING BEHAVIOR
+# This option determines how Nagios will fork child processes
+# (used to execute system commands and host/service checks).  Normally
+# child processes are fork()ed twice, which provides a very high level
+# of isolation from problems.  Fork()ing once is probably enough and will
+# save a great deal on CPU usage (in large installs), so you might
+# want to consider using this.  If you specify a value here, it will
+# program defaults.
+# Value: 1 - Child processes fork() twice
+#        0 - Child processes fork() just once
+
+#child_processes_fork_twice=1
+
+
+
+# DEBUG LEVEL
+# This option determines how much (if any) debugging information will
+# be written to the debug file.  OR values together to log multiple
+# types of information.
+# Values: 
+#          -1 = Everything
+#          0 = Nothing
+#	   1 = Functions
+#          2 = Configuration
+#          4 = Process information
+#	   8 = Scheduled events
+#          16 = Host/service checks
+#          32 = Notifications
+#          64 = Event broker
+#          128 = External commands
+#          256 = Commands
+#          512 = Scheduled downtime
+#          1024 = Comments
+#          2048 = Macros
+
+debug_level=0
+
+
+
+# DEBUG VERBOSITY
+# This option determines how verbose the debug log out will be.
+# Values: 0 = Brief output
+#         1 = More detailed
+#         2 = Very detailed
+
+debug_verbosity=1
+
+
+
+# DEBUG FILE
+# This option determines where Nagios should write debugging information.
+
+debug_file=/var/lib/nagios/nagios.debug
+
+
+
+# MAX DEBUG FILE SIZE
+# This option determines the maximum size (in bytes) of the debug file.  If
+# the file grows larger than this size, it will be renamed with a .old
+# extension.  If a file already exists with a .old extension it will
+# automatically be deleted.  This helps ensure your disk space usage doesn't
+# get out of control when debugging Nagios.
+
+max_debug_file_size=1000000
+
+
diff --git a/config/old/objects/commands.cfg b/config/old/objects/commands.cfg
new file mode 100644
index 0000000..4e9f94f
--- /dev/null
+++ b/config/old/objects/commands.cfg
@@ -0,0 +1,240 @@
+###############################################################################
+# COMMANDS.CFG - SAMPLE COMMAND DEFINITIONS FOR NAGIOS 3.3.1
+#
+# Last Modified: 05-31-2007
+#
+# NOTES: This config file provides you with some example command definitions
+#        that you can reference in host, service, and contact definitions.
+#       
+#        You don't need to keep commands in a separate file from your other
+#        object definitions.  This has been done just to make things easier to
+#        understand.
+#
+###############################################################################
+
+
+################################################################################
+#
+# SAMPLE NOTIFICATION COMMANDS
+#
+# These are some example notification commands.  They may or may not work on
+# your system without modification.  As an example, some systems will require 
+# you to use "/usr/bin/mailx" instead of "/usr/bin/mail" in the commands below.
+#
+################################################################################
+
+
+# 'notify-host-by-email' command definition
+define command{
+	command_name	notify-host-by-email
+	command_line	/usr/bin/printf "%b" "***** Nagios *****\n\nNotification Type: $NOTIFICATIONTYPE$\nHost: $HOSTNAME$\nState: $HOSTSTATE$\nAddress: $HOSTADDRESS$\nInfo: $HOSTOUTPUT$\n\nDate/Time: $LONGDATETIME$\n" | /usr/bin/mail -s "** $NOTIFICATIONTYPE$ Host Alert: $HOSTNAME$ is $HOSTSTATE$ **" $CONTACTEMAIL$
+	}
+
+# 'notify-service-by-email' command definition
+define command{
+	command_name	notify-service-by-email
+	command_line	/usr/bin/printf "%b" "***** Nagios *****\n\nNotification Type: $NOTIFICATIONTYPE$\n\nService: $SERVICEDESC$\nHost: $HOSTALIAS$\nAddress: $HOSTADDRESS$\nState: $SERVICESTATE$\n\nDate/Time: $LONGDATETIME$\n\nAdditional Info:\n\n$SERVICEOUTPUT$\n" | /usr/bin/mail -s "** $NOTIFICATIONTYPE$ Service Alert: $HOSTALIAS$/$SERVICEDESC$ is $SERVICESTATE$ **" $CONTACTEMAIL$
+	}
+
+
+
+
+
+################################################################################
+#
+# SAMPLE HOST CHECK COMMANDS
+#
+################################################################################
+
+
+# This command checks to see if a host is "alive" by pinging it
+# The check must result in a 100% packet loss or 5 second (5000ms) round trip 
+# average time to produce a critical error.
+# Note: Five ICMP echo packets are sent (determined by the '-p 5' argument)
+
+# 'check-host-alive' command definition
+define command{
+        command_name    check-host-alive
+        command_line    $USER1$/check_ping -H $HOSTADDRESS$ -w 3000.0,80% -c 5000.0,100% -p 5
+        }
+
+
+
+
+################################################################################
+#
+# SAMPLE SERVICE CHECK COMMANDS
+#
+# These are some example service check commands.  They may or may not work on
+# your system, as they must be modified for your plugins.  See the HTML 
+# documentation on the plugins for examples of how to configure command definitions.
+#
+# NOTE:  The following 'check_local_...' functions are designed to monitor
+#        various metrics on the host that Nagios is running on (i.e. this one).
+################################################################################
+
+# 'check_local_disk' command definition
+define command{
+        command_name    check_local_disk
+        command_line    $USER1$/check_disk -w $ARG1$ -c $ARG2$ -p $ARG3$
+        }
+
+
+# 'check_local_load' command definition
+define command{
+        command_name    check_local_load
+        command_line    $USER1$/check_load -w $ARG1$ -c $ARG2$
+        }
+
+
+# 'check_local_procs' command definition
+define command{
+        command_name    check_local_procs
+        command_line    $USER1$/check_procs -w $ARG1$ -c $ARG2$ -s $ARG3$
+        }
+
+
+# 'check_local_users' command definition
+define command{
+        command_name    check_local_users
+        command_line    $USER1$/check_users -w $ARG1$ -c $ARG2$
+        }
+
+
+# 'check_local_swap' command definition
+define command{
+	command_name	check_local_swap
+	command_line	$USER1$/check_swap -w $ARG1$ -c $ARG2$
+	}
+
+
+# 'check_local_mrtgtraf' command definition
+define command{
+	command_name	check_local_mrtgtraf
+	command_line	$USER1$/check_mrtgtraf -F $ARG1$ -a $ARG2$ -w $ARG3$ -c $ARG4$ -e $ARG5$
+	}
+
+
+################################################################################
+# NOTE:  The following 'check_...' commands are used to monitor services on
+#        both local and remote hosts.
+################################################################################
+
+# 'check_ftp' command definition
+define command{
+        command_name    check_ftp
+        command_line    $USER1$/check_ftp -H $HOSTADDRESS$ $ARG1$
+        }
+
+
+# 'check_hpjd' command definition
+define command{
+        command_name    check_hpjd
+        command_line    $USER1$/check_hpjd -H $HOSTADDRESS$ $ARG1$
+        }
+
+
+# 'check_snmp' command definition
+define command{
+        command_name    check_snmp
+        command_line    $USER1$/check_snmp -H $HOSTADDRESS$ $ARG1$
+        }
+
+
+# 'check_http' command definition
+define command{
+        command_name    check_http
+        command_line    $USER1$/check_http -I $HOSTADDRESS$ $ARG1$
+        }
+
+
+# 'check_ssh' command definition
+define command{
+	command_name	check_ssh
+	command_line	$USER1$/check_ssh $ARG1$ $HOSTADDRESS$
+	}
+
+
+# 'check_dhcp' command definition
+define command{
+	command_name	check_dhcp
+	command_line	$USER1$/check_dhcp $ARG1$
+	}
+
+
+# 'check_ping' command definition
+define command{
+        command_name    check_ping
+        command_line    $USER1$/check_ping -H $HOSTADDRESS$ -w $ARG1$ -c $ARG2$ -p 5
+        }
+
+
+# 'check_pop' command definition
+define command{
+        command_name    check_pop
+        command_line    $USER1$/check_pop -H $HOSTADDRESS$ $ARG1$
+        }
+
+
+# 'check_imap' command definition
+define command{
+        command_name    check_imap
+        command_line    $USER1$/check_imap -H $HOSTADDRESS$ $ARG1$
+        }
+
+
+# 'check_smtp' command definition
+define command{
+        command_name    check_smtp
+        command_line    $USER1$/check_smtp -H $HOSTADDRESS$ $ARG1$
+        }
+
+
+# 'check_tcp' command definition
+define command{
+	command_name	check_tcp
+	command_line	$USER1$/check_tcp -H $HOSTADDRESS$ -p $ARG1$ $ARG2$
+	}
+
+
+# 'check_udp' command definition
+define command{
+	command_name	check_udp
+	command_line	$USER1$/check_udp -H $HOSTADDRESS$ -p $ARG1$ $ARG2$
+	}
+
+
+# 'check_nt' command definition
+define command{
+	command_name	check_nt
+	command_line	$USER1$/check_nt -H $HOSTADDRESS$ -p 12489 -v $ARG1$ $ARG2$
+	}
+
+
+
+################################################################################
+#
+# SAMPLE PERFORMANCE DATA COMMANDS
+#
+# These are sample performance data commands that can be used to send performance
+# data output to two text files (one for hosts, another for services).  If you
+# plan on simply writing performance data out to a file, consider using the 
+# host_perfdata_file and service_perfdata_file options in the main config file.
+#
+################################################################################
+
+
+# 'process-host-perfdata' command definition
+define command{
+	command_name	process-host-perfdata
+	command_line	/usr/bin/printf "%b" "$LASTHOSTCHECK$\t$HOSTNAME$\t$HOSTSTATE$\t$HOSTATTEMPT$\t$HOSTSTATETYPE$\t$HOSTEXECUTIONTIME$\t$HOSTOUTPUT$\t$HOSTPERFDATA$\n" >> /var/lib/nagios/host-perfdata.out
+	}
+
+
+# 'process-service-perfdata' command definition
+define command{
+	command_name	process-service-perfdata
+	command_line	/usr/bin/printf "%b" "$LASTSERVICECHECK$\t$HOSTNAME$\t$SERVICEDESC$\t$SERVICESTATE$\t$SERVICEATTEMPT$\t$SERVICESTATETYPE$\t$SERVICEEXECUTIONTIME$\t$SERVICELATENCY$\t$SERVICEOUTPUT$\t$SERVICEPERFDATA$\n" >> /var/lib/nagios/service-perfdata.out
+	}
+
+
diff --git a/config/old/objects/contacts.cfg b/config/old/objects/contacts.cfg
new file mode 100644
index 0000000..b90fc68
--- /dev/null
+++ b/config/old/objects/contacts.cfg
@@ -0,0 +1,55 @@
+###############################################################################
+# CONTACTS.CFG - SAMPLE CONTACT/CONTACTGROUP DEFINITIONS
+#
+# Last Modified: 05-31-2007
+#
+# NOTES: This config file provides you with some example contact and contact
+#        group definitions that you can reference in host and service
+#        definitions.
+#       
+#        You don't need to keep these definitions in a separate file from your
+#        other object definitions.  This has been done just to make things
+#        easier to understand.
+#
+###############################################################################
+
+
+
+###############################################################################
+###############################################################################
+#
+# CONTACTS
+#
+###############################################################################
+###############################################################################
+
+# Just one contact defined by default - the Nagios admin (that's you)
+# This contact definition inherits a lot of default values from the 'generic-contact' 
+# template which is defined elsewhere.
+
+define contact{
+        contact_name                    nagiosadmin		; Short name of user
+	use				generic-contact		; Inherit default values from generic-contact template (defined above)
+        alias                           Nagios Admin		; Full name of user
+
+        email                           nagios@localhost	; <<***** CHANGE THIS TO YOUR EMAIL ADDRESS ******
+        }
+
+
+
+###############################################################################
+###############################################################################
+#
+# CONTACT GROUPS
+#
+###############################################################################
+###############################################################################
+
+# We only have one contact in this simple configuration file, so there is
+# no need to create more than one contact group.
+
+define contactgroup{
+        contactgroup_name       admins
+        alias                   Nagios Administrators
+        members                 nagiosadmin
+        }
diff --git a/config/old/objects/localhost.cfg b/config/old/objects/localhost.cfg
new file mode 100644
index 0000000..6882ced
--- /dev/null
+++ b/config/old/objects/localhost.cfg
@@ -0,0 +1,157 @@
+###############################################################################
+# LOCALHOST.CFG - SAMPLE OBJECT CONFIG FILE FOR MONITORING THIS MACHINE
+#
+# Last Modified: 05-31-2007
+#
+# NOTE: This config file is intended to serve as an *extremely* simple 
+#       example of how you can create configuration entries to monitor
+#       the local (Linux) machine.
+#
+###############################################################################
+
+
+
+
+###############################################################################
+###############################################################################
+#
+# HOST DEFINITION
+#
+###############################################################################
+###############################################################################
+
+# Define a host for the local machine
+
+define host{
+        use                     linux-server            ; Name of host template to use
+							; This host definition will inherit all variables that are defined
+							; in (or inherited by) the linux-server host template definition.
+        host_name               localhost
+        alias                   localhost
+        address                 127.0.0.1
+        }
+
+
+
+###############################################################################
+###############################################################################
+#
+# HOST GROUP DEFINITION
+#
+###############################################################################
+###############################################################################
+
+# Define an optional hostgroup for Linux machines
+
+define hostgroup{
+        hostgroup_name  linux-servers ; The name of the hostgroup
+        alias           Linux Servers ; Long name of the group
+        members         localhost     ; Comma separated list of hosts that belong to this group
+        }
+
+
+
+###############################################################################
+###############################################################################
+#
+# SERVICE DEFINITIONS
+#
+###############################################################################
+###############################################################################
+
+
+# Define a service to "ping" the local machine
+
+define service{
+        use                             local-service         ; Name of service template to use
+        host_name                       localhost
+        service_description             PING
+	check_command			check_ping!100.0,20%!500.0,60%
+        }
+
+
+# Define a service to check the disk space of the root partition
+# on the local machine.  Warning if < 20% free, critical if
+# < 10% free space on partition.
+
+define service{
+        use                             local-service         ; Name of service template to use
+        host_name                       localhost
+        service_description             Root Partition
+	check_command			check_local_disk!20%!10%!/
+        }
+
+
+
+# Define a service to check the number of currently logged in
+# users on the local machine.  Warning if > 20 users, critical
+# if > 50 users.
+
+define service{
+        use                             local-service         ; Name of service template to use
+        host_name                       localhost
+        service_description             Current Users
+	check_command			check_local_users!20!50
+        }
+
+
+# Define a service to check the number of currently running procs
+# on the local machine.  Warning if > 250 processes, critical if
+# > 400 users.
+
+define service{
+        use                             local-service         ; Name of service template to use
+        host_name                       localhost
+        service_description             Total Processes
+	check_command			check_local_procs!250!400!RSZDT
+        }
+
+
+
+# Define a service to check the load on the local machine. 
+
+define service{
+        use                             local-service         ; Name of service template to use
+        host_name                       localhost
+        service_description             Current Load
+	check_command			check_local_load!5.0,4.0,3.0!10.0,6.0,4.0
+        }
+
+
+
+# Define a service to check the swap usage the local machine. 
+# Critical if less than 10% of swap is free, warning if less than 20% is free
+
+define service{
+        use                             local-service         ; Name of service template to use
+        host_name                       localhost
+        service_description             Swap Usage
+	check_command			check_local_swap!20!10
+        }
+
+
+
+# Define a service to check SSH on the local machine.
+# Disable notifications for this service by default, as not all users may have SSH enabled.
+
+define service{
+        use                             local-service         ; Name of service template to use
+        host_name                       localhost
+        service_description             SSH
+	check_command			check_ssh
+	notifications_enabled		0
+        }
+
+
+
+# Define a service to check HTTP on the local machine.
+# Disable notifications for this service by default, as not all users may have HTTP enabled.
+
+define service{
+        use                             local-service         ; Name of service template to use
+        host_name                       localhost
+        service_description             HTTP
+	check_command			check_http
+	notifications_enabled		0
+        }
+
diff --git a/config/old/objects/nrpe_check_control.cfg b/config/old/objects/nrpe_check_control.cfg
new file mode 100644
index 0000000..0b1935e
--- /dev/null
+++ b/config/old/objects/nrpe_check_control.cfg
@@ -0,0 +1,4 @@
+define command {
+    command_name    nrpe_check_control
+    command_line    /usr/lib/nagios/plugins/nrpe_check_control $SERVICESTATE$ $SERVICESTATETYPE$ $SERVICEATTEMPT$ "$HOSTNAME$"
+}
diff --git a/config/old/objects/printer.cfg b/config/old/objects/printer.cfg
new file mode 100644
index 0000000..1de8855
--- /dev/null
+++ b/config/old/objects/printer.cfg
@@ -0,0 +1,85 @@
+###############################################################################
+# PRINTER.CFG - SAMPLE CONFIG FILE FOR MONITORING A NETWORK PRINTER
+#
+# Last Modified: 10-03-2007
+#
+# NOTES: This config file assumes that you are using the sample configuration
+#	 files that get installed with the Nagios quickstart guide.
+#
+###############################################################################
+
+
+
+
+###############################################################################
+###############################################################################
+#
+# HOST DEFINITIONS
+#
+###############################################################################
+###############################################################################
+
+# Define a host for the printer we'll be monitoring
+# Change the host_name, alias, and address to fit your situation
+
+define host{
+	use		generic-printer		; Inherit default values from a template
+	host_name	hplj2605dn		; The name we're giving to this printer
+	alias		HP LaserJet 2605dn	; A longer name associated with the printer
+	address		192.168.1.30		; IP address of the printer
+	hostgroups	network-printers 	; Host groups this printer is associated with
+	}
+
+
+
+
+###############################################################################
+###############################################################################
+#
+# HOST GROUP DEFINITIONS
+#
+###############################################################################
+###############################################################################
+
+# A hostgroup for network printers
+
+define hostgroup{
+	hostgroup_name	network-printers	; The name of the hostgroup
+	alias		Network Printers	; Long name of the group
+	}
+
+
+
+
+###############################################################################
+###############################################################################
+#
+# SERVICE DEFINITIONS
+#
+###############################################################################
+###############################################################################
+
+# Create a service for monitoring the status of the printer
+# Change the host_name to match the name of the host you defined above
+# If the printer has an SNMP community string other than "public", change the check_command directive to reflect that
+
+define service{
+	use			generic-service		; Inherit values from a template
+	host_name		hplj2605dn		; The name of the host the service is associated with
+	service_description	Printer Status		; The service description
+	check_command		check_hpjd!-C public	; The command used to monitor the service
+	normal_check_interval	10	; Check the service every 10 minutes under normal conditions
+	retry_check_interval	1	; Re-check the service every minute until its final/hard state is determined
+	}
+
+
+# Create a service for "pinging" the printer occassionally.  Useful for monitoring RTA, packet loss, etc.
+
+define service{
+	use			generic-service
+	host_name		hplj2605dn
+	service_description	PING
+	check_command		check_ping!3000.0,80%!5000.0,100%
+	normal_check_interval	10
+	retry_check_interval	1
+        }
diff --git a/config/old/objects/switch.cfg b/config/old/objects/switch.cfg
new file mode 100644
index 0000000..60c4db6
--- /dev/null
+++ b/config/old/objects/switch.cfg
@@ -0,0 +1,113 @@
+###############################################################################
+# SWITCH.CFG - SAMPLE CONFIG FILE FOR MONITORING A SWITCH
+#
+# Last Modified: 10-03-2007
+#
+# NOTES: This config file assumes that you are using the sample configuration
+#	 files that get installed with the Nagios quickstart guide.
+#
+###############################################################################
+
+
+
+
+###############################################################################
+###############################################################################
+#
+# HOST DEFINITIONS
+#
+###############################################################################
+###############################################################################
+
+# Define the switch that we'll be monitoring
+
+define host{
+	use		generic-switch		; Inherit default values from a template
+	host_name	linksys-srw224p		; The name we're giving to this switch
+	alias		Linksys SRW224P Switch	; A longer name associated with the switch
+	address		192.168.1.253		; IP address of the switch
+	hostgroups	switches		; Host groups this switch is associated with
+	}
+
+
+
+
+###############################################################################
+###############################################################################
+#
+# HOST GROUP DEFINITIONS
+#
+###############################################################################
+###############################################################################
+
+# Create a new hostgroup for switches
+
+define hostgroup{
+	hostgroup_name	switches		; The name of the hostgroup
+	alias		Network Switches	; Long name of the group
+	}
+
+
+
+
+###############################################################################
+###############################################################################
+#
+# SERVICE DEFINITIONS
+#
+###############################################################################
+###############################################################################
+
+# Create a service to PING to switch
+
+define service{
+	use			generic-service	; Inherit values from a template
+	host_name		linksys-srw224p	; The name of the host the service is associated with
+	service_description	PING		; The service description
+	check_command		check_ping!200.0,20%!600.0,60%	; The command used to monitor the service
+	normal_check_interval	5		; Check the service every 5 minutes under normal conditions
+	retry_check_interval	1		; Re-check the service every minute until its final/hard state is determined
+	}
+
+
+# Monitor uptime via SNMP
+
+define service{
+	use			generic-service	; Inherit values from a template
+	host_name		linksys-srw224p
+	service_description	Uptime	
+	check_command		check_snmp!-C public -o sysUpTime.0
+	}
+
+
+
+# Monitor Port 1 status via SNMP
+
+define service{
+	use			generic-service	; Inherit values from a template
+	host_name		linksys-srw224p
+	service_description	Port 1 Link Status
+	check_command		check_snmp!-C public -o ifOperStatus.1 -r 1 -m RFC1213-MIB
+	}
+
+
+
+# Monitor bandwidth via MRTG logs
+
+define service{
+	use			generic-service	; Inherit values from a template
+	host_name		linksys-srw224p
+	service_description	Port 1 Bandwidth Usage
+	check_command		check_local_mrtgtraf!/var/lib/mrtg/192.168.1.253_1.log!AVG!1000000,1000000!5000000,5000000!10
+	}
+
+
+
+
+
+
+
+
+
+
+
diff --git a/config/old/objects/templates.cfg b/config/old/objects/templates.cfg
new file mode 100644
index 0000000..16a980d
--- /dev/null
+++ b/config/old/objects/templates.cfg
@@ -0,0 +1,190 @@
+###############################################################################
+# TEMPLATES.CFG - SAMPLE OBJECT TEMPLATES
+#
+# Last Modified: 10-03-2007
+#
+# NOTES: This config file provides you with some example object definition
+#        templates that are refered by other host, service, contact, etc.
+#        definitions in other config files.
+#       
+#        You don't need to keep these definitions in a separate file from your
+#        other object definitions.  This has been done just to make things
+#        easier to understand.
+#
+###############################################################################
+
+
+
+###############################################################################
+###############################################################################
+#
+# CONTACT TEMPLATES
+#
+###############################################################################
+###############################################################################
+
+# Generic contact definition template - This is NOT a real contact, just a template!
+
+define contact{
+        name                            generic-contact    	; The name of this contact template
+        service_notification_period     24x7			; service notifications can be sent anytime
+        host_notification_period        24x7			; host notifications can be sent anytime
+        service_notification_options    w,u,c,r,f,s		; send notifications for all service states, flapping events, and scheduled downtime events
+        host_notification_options       d,u,r,f,s		; send notifications for all host states, flapping events, and scheduled downtime events
+        service_notification_commands   notify-service-by-email	; send service notifications via email
+        host_notification_commands      notify-host-by-email	; send host notifications via email
+        register                        0       		; DONT REGISTER THIS DEFINITION - ITS NOT A REAL CONTACT, JUST A TEMPLATE!
+        }
+
+
+
+
+###############################################################################
+###############################################################################
+#
+# HOST TEMPLATES
+#
+###############################################################################
+###############################################################################
+
+# Generic host definition template - This is NOT a real host, just a template!
+
+define host{
+        name                            generic-host    ; The name of this host template
+        notifications_enabled           1       	; Host notifications are enabled
+        event_handler_enabled           1       	; Host event handler is enabled
+        flap_detection_enabled          1       	; Flap detection is enabled
+        failure_prediction_enabled      1       	; Failure prediction is enabled
+        process_perf_data               1       	; Process performance data
+        retain_status_information       1       	; Retain status information across program restarts
+        retain_nonstatus_information    1       	; Retain non-status information across program restarts
+	notification_period		24x7		; Send host notifications at any time
+        register                        0       	; DONT REGISTER THIS DEFINITION - ITS NOT A REAL HOST, JUST A TEMPLATE!
+        }
+
+
+# Linux host definition template - This is NOT a real host, just a template!
+
+define host{
+	name				linux-server	; The name of this host template
+	use				generic-host	; This template inherits other values from the generic-host template
+	check_period			24x7		; By default, Linux hosts are checked round the clock
+	check_interval			5		; Actively check the host every 5 minutes
+	retry_interval			1		; Schedule host check retries at 1 minute intervals
+	max_check_attempts		10		; Check each Linux host 10 times (max)
+        check_command           	check-host-alive ; Default command to check Linux hosts
+	notification_period		workhours	; Linux admins hate to be woken up, so we only notify during the day
+							; Note that the notification_period variable is being overridden from
+							; the value that is inherited from the generic-host template!
+	notification_interval		120		; Resend notifications every 2 hours
+	notification_options		d,u,r		; Only send notifications for specific host states
+	contact_groups			admins		; Notifications get sent to the admins by default
+	register			0		; DONT REGISTER THIS DEFINITION - ITS NOT A REAL HOST, JUST A TEMPLATE!
+	}
+
+
+
+# Windows host definition template - This is NOT a real host, just a template!
+
+define host{
+	name			windows-server	; The name of this host template
+	use			generic-host	; Inherit default values from the generic-host template
+	check_period		24x7		; By default, Windows servers are monitored round the clock
+	check_interval		5		; Actively check the server every 5 minutes
+	retry_interval		1		; Schedule host check retries at 1 minute intervals
+	max_check_attempts	10		; Check each server 10 times (max)
+	check_command		check-host-alive	; Default command to check if servers are "alive"
+	notification_period	24x7		; Send notification out at any time - day or night
+	notification_interval	30		; Resend notifications every 30 minutes
+	notification_options	d,r		; Only send notifications for specific host states
+	contact_groups		admins		; Notifications get sent to the admins by default
+	hostgroups		windows-servers ; Host groups that Windows servers should be a member of
+	register		0		; DONT REGISTER THIS - ITS JUST A TEMPLATE
+	}
+
+
+# We define a generic printer template that can be used for most printers we monitor
+
+define host{
+	name			generic-printer	; The name of this host template
+	use			generic-host	; Inherit default values from the generic-host template
+	check_period		24x7		; By default, printers are monitored round the clock
+	check_interval		5		; Actively check the printer every 5 minutes
+	retry_interval		1		; Schedule host check retries at 1 minute intervals
+	max_check_attempts	10		; Check each printer 10 times (max)
+	check_command		check-host-alive	; Default command to check if printers are "alive"
+	notification_period	workhours		; Printers are only used during the workday
+	notification_interval	30		; Resend notifications every 30 minutes
+	notification_options	d,r		; Only send notifications for specific host states
+	contact_groups		admins		; Notifications get sent to the admins by default
+	register		0		; DONT REGISTER THIS - ITS JUST A TEMPLATE
+	}
+
+
+# Define a template for switches that we can reuse
+define host{
+	name			generic-switch	; The name of this host template
+	use			generic-host	; Inherit default values from the generic-host template
+	check_period		24x7		; By default, switches are monitored round the clock
+	check_interval		5		; Switches are checked every 5 minutes
+	retry_interval		1		; Schedule host check retries at 1 minute intervals
+	max_check_attempts	10		; Check each switch 10 times (max)
+	check_command		check-host-alive	; Default command to check if routers are "alive"
+	notification_period	24x7		; Send notifications at any time
+	notification_interval	30		; Resend notifications every 30 minutes
+	notification_options	d,r		; Only send notifications for specific host states
+	contact_groups		admins		; Notifications get sent to the admins by default
+	register		0		; DONT REGISTER THIS - ITS JUST A TEMPLATE
+	}
+
+
+
+
+###############################################################################
+###############################################################################
+#
+# SERVICE TEMPLATES
+#
+###############################################################################
+###############################################################################
+
+# Generic service definition template - This is NOT a real service, just a template!
+
+define service{
+        name                            generic-service 	; The 'name' of this service template
+        active_checks_enabled           1       		; Active service checks are enabled
+        passive_checks_enabled          1    		   	; Passive service checks are enabled/accepted
+        parallelize_check               1       		; Active service checks should be parallelized (disabling this can lead to major performance problems)
+        obsess_over_service             1       		; We should obsess over this service (if necessary)
+        check_freshness                 0       		; Default is to NOT check service 'freshness'
+        notifications_enabled           1       		; Service notifications are enabled
+        event_handler_enabled           1       		; Service event handler is enabled
+        flap_detection_enabled          1       		; Flap detection is enabled
+        failure_prediction_enabled      1       		; Failure prediction is enabled
+        process_perf_data               1       		; Process performance data
+        retain_status_information       1       		; Retain status information across program restarts
+        retain_nonstatus_information    1       		; Retain non-status information across program restarts
+        is_volatile                     0       		; The service is not volatile
+        check_period                    24x7			; The service can be checked at any time of the day
+        max_check_attempts              3			; Re-check the service up to 3 times in order to determine its final (hard) state
+        normal_check_interval           10			; Check the service every 10 minutes under normal conditions
+        retry_check_interval            2			; Re-check the service every two minutes until a hard state can be determined
+        contact_groups                  admins			; Notifications get sent out to everyone in the 'admins' group
+	notification_options		w,u,c,r			; Send notifications about warning, unknown, critical, and recovery events
+        notification_interval           60			; Re-notify about service problems every hour
+        notification_period             24x7			; Notifications can be sent out at any time
+         register                        0       		; DONT REGISTER THIS DEFINITION - ITS NOT A REAL SERVICE, JUST A TEMPLATE!
+        }
+
+
+# Local service definition template - This is NOT a real service, just a template!
+
+define service{
+	name				local-service 		; The name of this service template
+	use				generic-service		; Inherit default values from the generic-service definition
+        max_check_attempts              4			; Re-check the service up to 4 times in order to determine its final (hard) state
+        normal_check_interval           5			; Check the service every 5 minutes under normal conditions
+        retry_check_interval            1			; Re-check the service every minute until a hard state can be determined
+        register                        0       		; DONT REGISTER THIS DEFINITION - ITS NOT A REAL SERVICE, JUST A TEMPLATE!
+	}
+
diff --git a/config/old/objects/timeperiods.cfg b/config/old/objects/timeperiods.cfg
new file mode 100644
index 0000000..7f1802e
--- /dev/null
+++ b/config/old/objects/timeperiods.cfg
@@ -0,0 +1,94 @@
+###############################################################################
+# TIMEPERIODS.CFG - SAMPLE TIMEPERIOD DEFINITIONS
+#
+# Last Modified: 05-31-2007
+#
+# NOTES: This config file provides you with some example timeperiod definitions
+#        that you can reference in host, service, contact, and dependency
+#        definitions.
+#       
+#        You don't need to keep timeperiods in a separate file from your other
+#        object definitions.  This has been done just to make things easier to
+#        understand.
+#
+###############################################################################
+
+
+
+###############################################################################
+###############################################################################
+#
+# TIME PERIODS
+#
+###############################################################################
+###############################################################################
+
+# This defines a timeperiod where all times are valid for checks, 
+# notifications, etc.  The classic "24x7" support nightmare. :-)
+define timeperiod{
+        timeperiod_name 24x7
+        alias           24 Hours A Day, 7 Days A Week
+        sunday          00:00-24:00
+        monday          00:00-24:00
+        tuesday         00:00-24:00
+        wednesday       00:00-24:00
+        thursday        00:00-24:00
+        friday          00:00-24:00
+        saturday        00:00-24:00
+        }
+
+
+# 'workhours' timeperiod definition
+define timeperiod{
+	timeperiod_name	workhours
+	alias		Normal Work Hours
+	monday		09:00-17:00
+	tuesday		09:00-17:00
+	wednesday	09:00-17:00
+	thursday	09:00-17:00
+	friday		09:00-17:00
+	}
+
+
+# 'none' timeperiod definition
+define timeperiod{
+	timeperiod_name	none
+	alias		No Time Is A Good Time
+	}
+
+
+# Some U.S. holidays
+# Note: The timeranges for each holiday are meant to *exclude* the holidays from being
+# treated as a valid time for notifications, etc.  You probably don't want your pager 
+# going off on New Year's.  Although you're employer might... :-)
+define timeperiod{
+	name			us-holidays
+        timeperiod_name         us-holidays
+        alias                   U.S. Holidays
+
+        january 1               00:00-00:00     ; New Years
+        monday -1 may           00:00-00:00     ; Memorial Day (last Monday in May)
+        july 4                  00:00-00:00     ; Independence Day
+        monday 1 september      00:00-00:00     ; Labor Day (first Monday in September)
+        thursday 4 november     00:00-00:00     ; Thanksgiving (4th Thursday in November)
+        december 25             00:00-00:00     ; Christmas
+        }
+
+
+# This defines a modified "24x7" timeperiod that covers every day of the
+# year, except for U.S. holidays (defined in the timeperiod above).
+define timeperiod{
+        timeperiod_name 24x7_sans_holidays
+        alias           24x7 Sans Holidays
+
+	use		us-holidays		; Get holiday exceptions from other timeperiod
+
+        sunday          00:00-24:00
+        monday          00:00-24:00
+        tuesday         00:00-24:00
+        wednesday       00:00-24:00
+        thursday        00:00-24:00
+        friday          00:00-24:00
+        saturday        00:00-24:00
+        }
+
diff --git a/config/old/objects/windows.cfg b/config/old/objects/windows.cfg
new file mode 100644
index 0000000..264a63a
--- /dev/null
+++ b/config/old/objects/windows.cfg
@@ -0,0 +1,145 @@
+###############################################################################
+# WINDOWS.CFG - SAMPLE CONFIG FILE FOR MONITORING A WINDOWS MACHINE
+#
+# Last Modified: 06-13-2007
+#
+# NOTES: This config file assumes that you are using the sample configuration
+#	 files that get installed with the Nagios quickstart guide.
+#
+###############################################################################
+
+
+
+
+###############################################################################
+###############################################################################
+#
+# HOST DEFINITIONS
+#
+###############################################################################
+###############################################################################
+
+# Define a host for the Windows machine we'll be monitoring
+# Change the host_name, alias, and address to fit your situation
+
+define host{
+	use		windows-server	; Inherit default values from a template
+	host_name	winserver	; The name we're giving to this host
+	alias		My Windows Server	; A longer name associated with the host
+	address		192.168.1.2	; IP address of the host
+	}
+
+
+
+
+###############################################################################
+###############################################################################
+#
+# HOST GROUP DEFINITIONS
+#
+###############################################################################
+###############################################################################
+
+
+# Define a hostgroup for Windows machines
+# All hosts that use the windows-server template will automatically be a member of this group
+
+define hostgroup{
+	hostgroup_name	windows-servers	; The name of the hostgroup
+	alias		Windows Servers	; Long name of the group
+	}
+
+
+
+
+###############################################################################
+###############################################################################
+#
+# SERVICE DEFINITIONS
+#
+###############################################################################
+###############################################################################
+
+
+# Create a service for monitoring the version of NSCLient++ that is installed
+# Change the host_name to match the name of the host you defined above
+
+define service{
+	use			generic-service
+	host_name		winserver
+	service_description	NSClient++ Version
+	check_command		check_nt!CLIENTVERSION
+	}
+
+
+
+# Create a service for monitoring the uptime of the server
+# Change the host_name to match the name of the host you defined above
+
+define service{
+	use			generic-service
+	host_name		winserver
+	service_description	Uptime
+	check_command		check_nt!UPTIME
+	}
+
+
+
+# Create a service for monitoring CPU load
+# Change the host_name to match the name of the host you defined above
+
+define service{
+	use			generic-service
+	host_name		winserver
+	service_description	CPU Load
+	check_command		check_nt!CPULOAD!-l 5,80,90
+	}
+
+
+
+# Create a service for monitoring memory usage
+# Change the host_name to match the name of the host you defined above
+
+define service{
+	use			generic-service
+	host_name		winserver
+	service_description	Memory Usage
+	check_command		check_nt!MEMUSE!-w 80 -c 90
+	}
+
+
+
+# Create a service for monitoring C:\ disk usage
+# Change the host_name to match the name of the host you defined above
+
+define service{
+	use			generic-service
+	host_name		winserver
+	service_description	C:\ Drive Space
+	check_command		check_nt!USEDDISKSPACE!-l c -w 80 -c 90
+	}
+
+
+
+# Create a service for monitoring the W3SVC service
+# Change the host_name to match the name of the host you defined above
+
+define service{
+	use			generic-service
+	host_name		winserver
+	service_description	W3SVC
+	check_command		check_nt!SERVICESTATE!-d SHOWALL -l W3SVC
+	}
+
+
+
+# Create a service for monitoring the Explorer.exe process
+# Change the host_name to match the name of the host you defined above
+
+define service{
+	use			generic-service
+	host_name		winserver
+	service_description	Explorer
+	check_command		check_nt!PROCSTATE!-d SHOWALL -l Explorer.exe
+	}
+
diff --git a/config/old/resource.cfg b/config/old/resource.cfg
new file mode 100644
index 0000000..06c26f1
--- /dev/null
+++ b/config/old/resource.cfg
@@ -0,0 +1,36 @@
+###########################################################################
+#
+# RESOURCE.CFG - Sample Resource File for Nagios 3.3.1
+#
+# Last Modified: 09-10-2003
+#
+# You can define $USERx$ macros in this file, which can in turn be used
+# in command definitions in your host config file(s).  $USERx$ macros are
+# useful for storing sensitive information such as usernames, passwords, 
+# etc.  They are also handy for specifying the path to plugins and 
+# event handlers - if you decide to move the plugins or event handlers to
+# a different directory in the future, you can just update one or two
+# $USERx$ macros, instead of modifying a lot of command definitions.
+#
+# The CGIs will not attempt to read the contents of resource files, so
+# you can set restrictive permissions (600 or 660) on them.
+#
+# Nagios supports up to 32 $USERx$ macros ($USER1$ through $USER32$)
+#
+# Resource files may also be used to store configuration directives for
+# external data sources like MySQL...
+#
+###########################################################################
+
+# Sets $USER1$ to be the path to the plugins
+$USER1$=/usr/lib/nagios/plugins
+$USER2$=/opt/nagios/
+
+
+# Sets $USER2$ to be the path to event handlers
+#$USER2$=/usr/lib/nagios/plugins/eventhandlers
+
+# Store some usernames and passwords (hidden from the CGIs)
+#$USER3$=someuser
+#$USER4$=somepassword
+
diff --git a/config/old/servers b/config/old/servers
new file mode 120000
index 0000000..f63cce2
--- /dev/null
+++ b/config/old/servers
@@ -0,0 +1 @@
+../pdv/servers
\ No newline at end of file