Cleaned configuration for PDV infrastructure (incomplete) integrated with my Conky monitoring scriptsHEADmaster

1 files changed, 240 insertions, 0 deletions

diff --git a/config/old/objects/commands.cfg b/config/old/objects/commands.cfg
new file mode 100644
index 0000000..4e9f94f
--- /dev/null
+++ b/config/old/objects/commands.cfg
@@ -0,0 +1,240 @@
+###############################################################################
+# COMMANDS.CFG - SAMPLE COMMAND DEFINITIONS FOR NAGIOS 3.3.1
+#
+# Last Modified: 05-31-2007
+#
+# NOTES: This config file provides you with some example command definitions
+#        that you can reference in host, service, and contact definitions.
+#       
+#        You don't need to keep commands in a separate file from your other
+#        object definitions.  This has been done just to make things easier to
+#        understand.
+#
+###############################################################################
+
+
+################################################################################
+#
+# SAMPLE NOTIFICATION COMMANDS
+#
+# These are some example notification commands.  They may or may not work on
+# your system without modification.  As an example, some systems will require 
+# you to use "/usr/bin/mailx" instead of "/usr/bin/mail" in the commands below.
+#
+################################################################################
+
+
+# 'notify-host-by-email' command definition
+define command{
+	command_name	notify-host-by-email
+	command_line	/usr/bin/printf "%b" "***** Nagios *****\n\nNotification Type: $NOTIFICATIONTYPE$\nHost: $HOSTNAME$\nState: $HOSTSTATE$\nAddress: $HOSTADDRESS$\nInfo: $HOSTOUTPUT$\n\nDate/Time: $LONGDATETIME$\n" | /usr/bin/mail -s "** $NOTIFICATIONTYPE$ Host Alert: $HOSTNAME$ is $HOSTSTATE$ **" $CONTACTEMAIL$
+	}
+
+# 'notify-service-by-email' command definition
+define command{
+	command_name	notify-service-by-email
+	command_line	/usr/bin/printf "%b" "***** Nagios *****\n\nNotification Type: $NOTIFICATIONTYPE$\n\nService: $SERVICEDESC$\nHost: $HOSTALIAS$\nAddress: $HOSTADDRESS$\nState: $SERVICESTATE$\n\nDate/Time: $LONGDATETIME$\n\nAdditional Info:\n\n$SERVICEOUTPUT$\n" | /usr/bin/mail -s "** $NOTIFICATIONTYPE$ Service Alert: $HOSTALIAS$/$SERVICEDESC$ is $SERVICESTATE$ **" $CONTACTEMAIL$
+	}
+
+
+
+
+
+################################################################################
+#
+# SAMPLE HOST CHECK COMMANDS
+#
+################################################################################
+
+
+# This command checks to see if a host is "alive" by pinging it
+# The check must result in a 100% packet loss or 5 second (5000ms) round trip 
+# average time to produce a critical error.
+# Note: Five ICMP echo packets are sent (determined by the '-p 5' argument)
+
+# 'check-host-alive' command definition
+define command{
+        command_name    check-host-alive
+        command_line    $USER1$/check_ping -H $HOSTADDRESS$ -w 3000.0,80% -c 5000.0,100% -p 5
+        }
+
+
+
+
+################################################################################
+#
+# SAMPLE SERVICE CHECK COMMANDS
+#
+# These are some example service check commands.  They may or may not work on
+# your system, as they must be modified for your plugins.  See the HTML 
+# documentation on the plugins for examples of how to configure command definitions.
+#
+# NOTE:  The following 'check_local_...' functions are designed to monitor
+#        various metrics on the host that Nagios is running on (i.e. this one).
+################################################################################
+
+# 'check_local_disk' command definition
+define command{
+        command_name    check_local_disk
+        command_line    $USER1$/check_disk -w $ARG1$ -c $ARG2$ -p $ARG3$
+        }
+
+
+# 'check_local_load' command definition
+define command{
+        command_name    check_local_load
+        command_line    $USER1$/check_load -w $ARG1$ -c $ARG2$
+        }
+
+
+# 'check_local_procs' command definition
+define command{
+        command_name    check_local_procs
+        command_line    $USER1$/check_procs -w $ARG1$ -c $ARG2$ -s $ARG3$
+        }
+
+
+# 'check_local_users' command definition
+define command{
+        command_name    check_local_users
+        command_line    $USER1$/check_users -w $ARG1$ -c $ARG2$
+        }
+
+
+# 'check_local_swap' command definition
+define command{
+	command_name	check_local_swap
+	command_line	$USER1$/check_swap -w $ARG1$ -c $ARG2$
+	}
+
+
+# 'check_local_mrtgtraf' command definition
+define command{
+	command_name	check_local_mrtgtraf
+	command_line	$USER1$/check_mrtgtraf -F $ARG1$ -a $ARG2$ -w $ARG3$ -c $ARG4$ -e $ARG5$
+	}
+
+
+################################################################################
+# NOTE:  The following 'check_...' commands are used to monitor services on
+#        both local and remote hosts.
+################################################################################
+
+# 'check_ftp' command definition
+define command{
+        command_name    check_ftp
+        command_line    $USER1$/check_ftp -H $HOSTADDRESS$ $ARG1$
+        }
+
+
+# 'check_hpjd' command definition
+define command{
+        command_name    check_hpjd
+        command_line    $USER1$/check_hpjd -H $HOSTADDRESS$ $ARG1$
+        }
+
+
+# 'check_snmp' command definition
+define command{
+        command_name    check_snmp
+        command_line    $USER1$/check_snmp -H $HOSTADDRESS$ $ARG1$
+        }
+
+
+# 'check_http' command definition
+define command{
+        command_name    check_http
+        command_line    $USER1$/check_http -I $HOSTADDRESS$ $ARG1$
+        }
+
+
+# 'check_ssh' command definition
+define command{
+	command_name	check_ssh
+	command_line	$USER1$/check_ssh $ARG1$ $HOSTADDRESS$
+	}
+
+
+# 'check_dhcp' command definition
+define command{
+	command_name	check_dhcp
+	command_line	$USER1$/check_dhcp $ARG1$
+	}
+
+
+# 'check_ping' command definition
+define command{
+        command_name    check_ping
+        command_line    $USER1$/check_ping -H $HOSTADDRESS$ -w $ARG1$ -c $ARG2$ -p 5
+        }
+
+
+# 'check_pop' command definition
+define command{
+        command_name    check_pop
+        command_line    $USER1$/check_pop -H $HOSTADDRESS$ $ARG1$
+        }
+
+
+# 'check_imap' command definition
+define command{
+        command_name    check_imap
+        command_line    $USER1$/check_imap -H $HOSTADDRESS$ $ARG1$
+        }
+
+
+# 'check_smtp' command definition
+define command{
+        command_name    check_smtp
+        command_line    $USER1$/check_smtp -H $HOSTADDRESS$ $ARG1$
+        }
+
+
+# 'check_tcp' command definition
+define command{
+	command_name	check_tcp
+	command_line	$USER1$/check_tcp -H $HOSTADDRESS$ -p $ARG1$ $ARG2$
+	}
+
+
+# 'check_udp' command definition
+define command{
+	command_name	check_udp
+	command_line	$USER1$/check_udp -H $HOSTADDRESS$ -p $ARG1$ $ARG2$
+	}
+
+
+# 'check_nt' command definition
+define command{
+	command_name	check_nt
+	command_line	$USER1$/check_nt -H $HOSTADDRESS$ -p 12489 -v $ARG1$ $ARG2$
+	}
+
+
+
+################################################################################
+#
+# SAMPLE PERFORMANCE DATA COMMANDS
+#
+# These are sample performance data commands that can be used to send performance
+# data output to two text files (one for hosts, another for services).  If you
+# plan on simply writing performance data out to a file, consider using the 
+# host_perfdata_file and service_perfdata_file options in the main config file.
+#
+################################################################################
+
+
+# 'process-host-perfdata' command definition
+define command{
+	command_name	process-host-perfdata
+	command_line	/usr/bin/printf "%b" "$LASTHOSTCHECK$\t$HOSTNAME$\t$HOSTSTATE$\t$HOSTATTEMPT$\t$HOSTSTATETYPE$\t$HOSTEXECUTIONTIME$\t$HOSTOUTPUT$\t$HOSTPERFDATA$\n" >> /var/lib/nagios/host-perfdata.out
+	}
+
+
+# 'process-service-perfdata' command definition
+define command{
+	command_name	process-service-perfdata
+	command_line	/usr/bin/printf "%b" "$LASTSERVICECHECK$\t$HOSTNAME$\t$SERVICEDESC$\t$SERVICESTATE$\t$SERVICEATTEMPT$\t$SERVICESTATETYPE$\t$SERVICEEXECUTIONTIME$\t$SERVICELATENCY$\t$SERVICEOUTPUT$\t$SERVICEPERFDATA$\n" >> /var/lib/nagios/service-perfdata.out
+	}
+
+